Produk

Comprised of a fully chromed all steel handle with thumb lever for reversing, this 1/2" square drive ratchet is suited for professional use. With a 72 tooth ratchet, it makes easy work of loosening and fastening nuts and bolts.

Features and Benefits
• Manufactured from steel for durability and resistance to wear and tear
• Chrome finish repels dirt and grime making it easier to clean
• Thumb lever allows for reversing without needing to detach the socket or accessory

Typical Applications
• Automotive
• Engineering
• DIY
• Construction
• Plumbing
• Electrical

Shaft mounted flap wheels can be used in portable air or electric power tools, including die grinders, flexible shafts and drills.

Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting.

Features and Benefits
• Recessed hub design for maximum access in tight corners
• Highly efficient design
• Durable construction means the flap wheels last longer than others on the market

Typical Applications
• Final finishing of metal surfaces
• Miss-match removal and de-burring on machined components.
• Blending and finishing tool, tubes, dies, moulds, channels
• Edge blending and cleaning. Surface preparation prior to painting and plating
• Can be used on metals, woods, plastic and fibreglass

Notes
• Images are for illustration purposes only

Cut 9 conical carbide burrs feature a cut-9 chipbreaker for fast stock removal, improved control and reduced chips. Ideally suited to hard materials such as steel alloy 50RC, 60RC, carbon and cast iron.

Features and Benefits
• Manufactured from a tough carbide substrate for greater tool hardness
• Cut-9 chipbreaker increases stock removal and chip control
• Ideal for use on hard materials such as steel alloys and more

Typical Applications
• Deburring
• Polishing
• Cast iron
• Cast steel
• Carbon steel
• Alloy steel
• Stainless steel
• Materials up to HRC65 hardness

Notes
• Workpiece and tools should always be steady and well supported
• Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal at high rpm's 'LOW FEED - HIGH SPEED'.
• Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used.
• Always ensure that the tool is rated to the recommended operating speed of the burr.

Elbow Connector to Male Parallel


Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.


Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.

This Domae product is a low voltage miniature circuit breaker (MCB). It is a 1P circuit breaker with 1 protected poles and 63A In rated current and C tripping curve. The Icn rated short circuit breaking capacity is up to 6000A at 230VAC conforming to EN/IEC 60898-1 standard. It is compliant with IEC 60898-1 standard. This miniature circuit breaker combines functions of circuit protection against short circuit and overload current, control and isolation. Mechanical durability goes up to 20000 cycles and electrical durability goes up to 10000 cycles. The Ue operational voltage is going from 230VAC. The operating frequency is 50Hz or 60Hz. It can be mounted on DIN rail for modular installation. Its width is 2 pitches of 9mm. The product colour is white (RAL9003). The dimensions are (W) 18mm x (H) 81mm x (D) 71.5mm. The weight is 0.095kg. According to IEC 60529 standard, the degree of protection is IP20 and IP40 in enclosure. The operating temperature is -5°C to 60°C. The storage temperature is -40°C to 85°C.

- Quickly measure distance, calculate area / volume / pythagoras

- Auto level and height

- Built to withstand rainy or dusty conditions: 1-meter drop tested with rated IP54 (Fluke 404E / 406E), IP65 (Fluke 405 / 408 / 410),

- Electronic angle display, auxiliary level measurement

- Up to 100 sets of data storage

- The battery life up to 5000 single measurements Automatically power off after 3 minutes of inactivity



Fluke 405 / 408 / 410 provide additional features as :

- Universal tripod interface, easy to use

- Type-C charging port, strong endurance

- 2-inch HD display, clear viewing in full sunlight

Shaft mounted flap wheels can be used in portable air or electric power tools, including die grinders, flexible shafts and drills.

Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting.

Features and Benefits
• Recessed hub design for maximum access in tight corners
• Highly efficient design
• Durable construction means the flap wheels last longer than others on the market

Typical Applications
• Final finishing of metal surfaces
• Miss-match removal and de-burring on machined components.
• Blending and finishing tool, tubes, dies, moulds, channels
• Edge blending and cleaning. Surface preparation prior to painting and plating
• Can be used on metals, woods, plastic and fibreglass

Notes
• Images are for illustration purposes only

Available in four attractive colours and an array of sizes and specifications to suit your needs, these plastic storage bins are incredibly versatile. Manufactured from high strength polypropylene which is corrosion resistant and robust, they possess an interlocking design that allows for the bins to be hung on any standard louvre panel as well as being able to stand freely to suit individual preference. A simple and elegant way to maximise your storage space.

Features and Benefits
• Manufactured from a high strength and durable polypropylene making it a long lasting product
• Has an interlocking design that allows for it to be hung on a standard louvre panel
• Can be nested and stacked to help optimise your storage
• Available in a range of four attractive colours to suit your personal tastes and needs

Typical Applications
• Ideal for being hung upon a louvred panel as well as being used for free standing storage. The range of colours makes it useful in institutional settings

Notes
• All measurements given are the outer dimensions and have a tolerance of +/-2.5mm

Manufactured from high quality chrome vanadium with a fully polished finish, this sliding T-Handle possesses a 1/2in. square drive. The sliding bar will give many options for leverage within a given space.

Features and Benefits
• Manufactured from high quality chrome vanadium steel for optimum durability
• Fully polished finish repels dirt and grime for an easier clean
• Can give various leverage options to allow you to loosen and tighten fasteners even in a restricted space

Typical Applications
• Automotive
• Construction
• Engineering

Used for insertion and removal of fasteners and fixings using 1/2"square drive tooling, this 20 piece socket set has applications that are most suited to the engineering industry. Manufactured from chrome vanadium steel and fully chrome plated with a mirror finish and aluminium-free, all pieces in the set have a ball retaining groove on each face of the square drive. Completed by a knurled body for bolstered grip and an optimum weight to strength ratio to ensure the reliability and accessibility of the product.

Features and Benefits
• Supplied in a plastic carry case with moulded slots for each size square drive to help organise your tools and for ease of transportation
• Manufactured from chrome vanadium steel to bolster product life and hardiness
• Unique knurled body gives extra grip which is essential for a quick tool change when your hands are greasy/oily
• 20 piece kit ensures you have all of the most common and necessary sizes for a host of applications

Contents
• Standard sockets: (4,5,6,7,8,10,12,14,17 and 19mm)
• AF sockets: (1/4",5/16",3/8",1/2",9/16" and 3/4")
•Screwdriver Bit Crosspoint: (No.2, No.3 and No.4)

Typical Applications
• Ideal for use most often in the automotive and aerospace industries as well as more general engineering purposes

Standards
• Conforms to DIN standards

The J100 Series are general purpose HSS straight shank drills with a black oxide finish. Ideal for applications involving steel (including cast steel) cast iron (including malleable cast iron) as well as nickel, brass aluminium alloys and graphite. Their 118° point allows for precise hole alignment and reliable cutting performance whilst the black oxide coating helps reduce heat by retaining coolant on the tool surface. The coating also helps reduce the risk of the tool staining.

Features and Benefits
• High speed steel construction for increased tool durability
• Point angle of 118° for precise holemaking and precision cutting
• Black oxide coating helps aid chip flow, reduce heat and prevent staining
• Ideal for applications involving steel, iron, nickel, brass, aluminium alloy and graphite

Typical Applications
• Cutting and drilling
• Ferrous materials
• Steel
• Iron
• Nickel
• Brass
• Aluminium alloy
• Graphite

Notes
• Available in sizes 0.25mm -20.00mm

Standards
• Manufactured to BS 328/DIN338RN

Elbow Connector to Male Taper


Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.


Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.