Produk

This Acti9 iK60N product is a low voltage miniature circuit breaker (MCB). It is a 1P circuit breaker with 1 protected pole and 40A In rated current and C tripping curve. The rated short circuit breaking capacity goes up to 6000A at 230VAC conforming to EN/IEC 60898-1 standard and at conforming to standard. This product is compliant with EN/IEC 60898-1 standard. This miniature circuit breaker protects circuit against short circuit and overload current. It has a double clip for dismounting with comb busbar in place. It has an electrical endurance going up to 10000 cycles and a mechanical endurance going up to 20000 cycles. The Ue operational voltage is 230VAC. The Ui rated insulation voltage is 440VAC. The Uimp rated impulse withstand voltage is 4kV. The operating frequency is 50Hz or 60Hz. It can be mounted on DIN rail for modular installation. Its width is 2 pitches of 9mm. The product colour is white (RAL9003). The dimensions are (W) 18mm x (H) 85mm x (D) 78.5mm. The weight is 100g. It has an IP20 degree of protection. It becomes IP40 once in modular enclosure according to IEC/EN 60529 standard. The operating temperature is -25°C to 60°C. The storage temperature is -40°C to 85°C.

The 87V MAX contains all the trusted features of the most popular DMM in use today, the Fluke 87V, with many more extras.



Withstands drops of up to 4 meters (13 feet)

Fluke's most rugged digital multimeter. The 87V MAX features a rugged case for industrial use and a removable holster. This holster also doubles as a test probe holder for one-handed operation.



IP67 rated

Completely waterproof and dustproof, to work reliably anywhere you need to work.



Heat and cold resistant

This meter has a longer operating temperature range from -40 °C (for up to 20 minutes) to +55 °C.



Another product highlight

- True-rms ac current and voltage for accurate measurements on non-linear signals

- Measures up to 1000 V ac and dc

- Measures up to 10 A (20 A for 30 seconds)

- Frequency up to 200 kHz

- Built-in thermometer allows you to freely take temperature readings without having to carry a separate instrument

- Min/Max/Average recording, plus 250 µs Peak min-max to record variations automatically

- Unique function for accurate measurement of voltage and frequency in variable frequency motor drives and other electrically noisy equipment

- Large digit display, 2 brightness levels, white backlight, and backlit keypad keys for better visibility

- High resolution 19,999 digit mode display

- Long lasting battery life (800 hours)

Available in four attractive colours and an array of sizes and specifications to suit your needs, these plastic storage bins are incredibly versatile. Manufactured from high strength polypropylene which is corrosion resistant and robust, they possess an interlocking design that allows for the bins to be hung on any standard louvre panel as well as being able to stand freely to suit individual preference. A simple and elegant way to maximise your storage space.

Features and Benefits
• Manufactured from a high strength and durable polypropylene making it a long lasting product
• Has an interlocking design that allows for it to be hung on a standard louvre panel
• Can be nested and stacked to help optimise your storage
• Available in a range of four attractive colours to suit your personal tastes and needs

Typical Applications
• Ideal for being hung upon a louvred panel as well as being used for free standing storage. The range of colours makes it useful in institutional settings

Notes
• All measurements given are the outer dimensions and have a tolerance of +/-2.5mm

Manufactured to assure operator safety and optimum performance. For use with all portable angle grinders.

Features and Benefits
• Highly effective aluminum oxide abrasive - cuts faster for longer
• Multiple disc sizes available, to suit any need
• Ultra-strong Reinforced Resinoid bond provides strength and operator peace of mind

Typical Applications
• Designed for use on alloyed and unalloyed construction steel, steel profiles, tank construction and fabrication, welding and fabrication
• 300mm discs can be used on Suitable Disc Cutting saws
• For use with all appropriate handheld angle grinders
• Cutting discs must never be used for grinding and must always be presented to the work piece at an angle of 90°
• Not to be used for wet cutting

Standards Met
• EN12413

This 1/2in. square drive socket set contains Ken-Grip® sockets for maximum performance and grip. Supplied in a robust carry case, each component is manufactured from chrome vanadium steel and chrome plated. Contains various metric sized sockets as well as socket accessories for a well rounded, comprehensive tool set.

Features and Benefits
• Grips nuts and bolts which are up to 95% rounded off
• Will not damage new, worn or rusted nuts and bolts
• Fits a wide range Metric, UNC, UNF, BSW, BSF and E-Torx® sizes for versatility of use
• Unique Double-Knurl design improves grip when using
• Manufactured from chrome vanadium steel for durability
• Supplied in a robust plastic carry case for ease of transportation, storage and organization of your components and accessories
• 30 piece set is comprehensive to ensure you have the right accessory or component to hand no matter the application
• Fully chrome plated finish for easy clean and additional resistance against corrosion

Contents
• Ken-Grip®: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22,23, 24, 25, 26, 27, 30 and 32mm
• Spark Plug Sockets: M10 and M14
• Accessories: quick release ratchet handle, sliding T-handle, universal joint, 75, 125 and 250mm extension bars. Robust fitted case with security padlock hole and cushion grip handle

Typical Applications
• Engineering
• Automotive
• DIY
• Construction

Elbow Connector to Male Parallel


Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.


Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.

This Acti9 iK60N product is a low voltage miniature circuit breaker (MCB). It is a 2P circuit breaker with 2 protected poles and 40A In rated current and C tripping curve. The rated short circuit breaking capacity goes up to 6000A at 230VAC conforming to EN/IEC 60898-1 standard and at conforming to standard. This product is compliant with EN/IEC 60898-1 standard. This miniature circuit breaker protects circuit against short circuit and overload current. It has a double clip for dismounting with comb busbar in place. It has an electrical endurance going up to 10000 cycles and a mechanical endurance going up to 20000 cycles. The Ue operational voltage is 230VAC. The Ui rated insulation voltage is 440VAC. The Uimp rated impulse withstand voltage is 4kV. The operating frequency is 50Hz or 60Hz. It can be mounted on DIN rail for modular installation. Its width is 4 pitches of 9mm. The product colour is white (RAL9003). The dimensions are (W) 36mm x (H) 85mm x (D) 78.5mm. The weight is 200g. It has an IP20 degree of protection. It becomes IP40 once in modular enclosure according to IEC/EN 60529 standard. The operating temperature is -25°C to 60°C. The storage temperature is -40°C to 85°C.

The ACDC-54NAV clamp-on power meter offers AC/DC current measurements to 1000 A, AC/DC voltage to 1000 V, temperature capabilities, and wide jaws to handle large conductors up to 1.6″ (40 mm) for high voltage industrial environments.



This clamp-on multimeter offers a full range of power quality diagnostics including power and power factor, total harmonics distortion, individual harmonics, in-rush current, phase sequence, TRMS and low pass filter for industrial power monitoring and verifying system conditions.

Available in four attractive colours and an array of sizes and specifications to suit your needs, these plastic storage bins are incredibly versatile. Manufactured from high strength polypropylene which is corrosion resistant and robust, they possess an interlocking design that allows for the bins to be hung on any standard louvre panel as well as being able to stand freely to suit individual preference. A simple and elegant way to maximise your storage space.

Features and Benefits
• Manufactured from a high strength and durable polypropylene making it a long lasting product
• Has an interlocking design that allows for it to be hung on a standard louvre panel
• Can be nested and stacked to help optimise your storage
• Available in a range of four attractive colours to suit your personal tastes and needs

Typical Applications
• Ideal for being hung upon a louvred panel as well as being used for free standing storage. The range of colours makes it useful in institutional settings

Notes
• All measurements given are the outer dimensions and have a tolerance of +/-2.5mm

For fast cutting on contours and hard-to-reach areas, these aluminium oxide cartridge rolls are a long-lasting and cost-effective choice. Ideal for deburring and metal removal, higher grits can also be used for blending and polishing applications.

Features and Benefits
• Spiral wound abrasive constantly exposes a new abrasive surface for product longevity
• Available in a range of roll sizes and grits to suit any application
• Straight form allows for consistent finishing

Typical Applications
• Flash removal
• Edge breaking
• Machine tool mark removal
• Polishing and finishing

1/2" Square Drive: The most popular drive size used in the service and maintenance industries. This popularity is due to the strength and robust nature of 1/2" drive.
All Kennedy Professional sockets have a knurl feature to give a high grip which is essential for a quick tool change when your hands are greasy/oily.
The 12 point bi-hexagon side drive design will give a higher torque than normal sockets, grip worn nuts and will not round off existing nuts.
Chamfered leading edge ensures easy fastener location.

Features and Benefits
• 12 point bi-hexagonal sockets provide higher torque than regular sockets
• Will grip worn nuts and won't round off existing nuts
• Manufactured from chrome vanadium steel making for a robust product
• Supplied in a moulded plastic carry case with handle for ease of transportation
• Polished finish repels dirt and grease keeping your tools cleaner longer

Typical Applications
• Automotive
• Construction
• DIY
• Engineering
• Plumbing
• Electrical

Designed with spiral flutes and various lengths and forms to give high quality centre holes that suit most applications. TiN coating on working parts for increased heat and wear resistance, offering a prolong efficient cutting lifespan.

Features and Benefits
• HSS construction for increased durabiluty
• TiN coating for increased heat and wear resistance
• Delivers high quality centre holes in most drilling applications

Typical Applications
• Drilling

Standards
• BS 328 : Part 2 : 1986,
• DIN 333A, ISO 866, ISO 2540, ISO 2541