Available as both standard and heavy duty, this range of M6 threaded contact tips are suited for use with MB and MTE style MIG welding torches. Varying in size and specification, you're sure to find the contact tip suited for your requirements. Compatible with Kennedy, Binzel and Parweld MIG Torches.

Features and Benefits
• An essential piece of kit to ensure your MIG torch performs at an optimum level
• Available in varying specifications to suit your individual purpose
• Manufactured with quality at the forefront
• Bolsters the life of your torch by regularly replacing your contact tip

Typical Applications
• Ideal for general purpose welding with MB and MTE style torches

When it comes to portable welders, the ESAB Rebel EMP 235ic is packed with the power to weld up to a half-inch on mild steel, measuring in at 235A at 20%. You have the ability to weld a wide range of metal thicknesses and applications, including the full range of 0.9 in both short arc and spray arc transfer, up to 1.0 solid wires, and up to 1.2 cored wires. Plus, ESAB Rebel EMP 235ic can also weld Stick rods up to 4mm and TIG rods up to 4.8mm.

Whether you have been welding for two years or 20, ESAB Rebel 235ic can make your job easier with sMIG (smartMIG). For the novice, there is basic mode, which makes setup simple. For the experienced, the exclusive, built-in arc control that constantly monitors your weld and adapts for superior, repeatable welds.

You’re on-site, out in the field, and in the shop. You need a machine that can go where you go and withstand the harsh environments you face. Rebel can. With a sturdy multi-handle roll cage, steel unibody construction, and IP23S-level protection, Rebel’s rugged exterior gives you the confidence to go where you need to go without fear.
The Rebel is a true Multi-Process inverter with professional-grade MIG performance, including flux-cored, Excellent MMA performance, including stainless steel, 6010 and 6011 cellulosic and 308L electrodes
• Exceptional lift TIG performance down to 5A

The CIGWELD TRANSMIG 175i+ is a self-contained single phase multiprocess welding inverter that is capable of performing GMAW/FCAW (MIG), MMAW (Stick) and GTAW (Lift TIG) welding processes.
The unit is equipped with an integrated wire feed unit, voltage reduction device (VRD applicable in Stick mode only), digital voltage and amperage meters, and a host of other features in order to fully satisfy the broad operating needs of the modern welding professional.
• 185A (MIG Mode) 3-in-1 MIG / Stick / Lift TIG Inverter Welder
• Digital Amperage and Voltage Meters
• Highly portable with carrying handle, carry strap and under 15kg
• Full multi-process capabilities; MIG, Stick and Lift TIG
• Integrated Wire Feed Unit ‰ Spools up to 5kg or 200mm
• Standards compliant VRD
• Fully compliant to AS 60974.1-2006. Enclosure Rated to IP23S – Designed for Indoor & Outdoor use.
• Arc Control (Inductance) for adjusting the intensity of the arc
• Adjustable Burnback Control for controlling MIG wire stick out
• Euro MIG Torch Connection
• Accepts Mechafin style 2R feed rolls
• Robust 50mmå_ Dinse twist lock connections
• 3 Year Limited Warranty

Meet the new CIGWELD TRANSMIG 555i Multi Process Heavy Duty Welding package!

Boasting a powerful 555 amp inverter block, this 3-phase beast packs serious arc punch for heavy metal applications! Loaded with advanced features across MIG, STICK, TIG and GOUGING processes, the TRANSMIG 555i has a rated duty cycle of 555A @ 40% and 500A @ 60%.

Oh, and did we mention it’s incredibly energy efficient? The 555i complies with the European Union ECO-Power regulations, so not only do you get more output amperage for your buck, but you pay less to run this 555i machine compared to a lot of other older machines. Power-Up and Pay-LessTM CIGWELD’s AUTO-SET advanced feature helps you get the best out of your welding performance. With pre-programmed synergic lines, by simply selecting the material type, consumable diameter and plate thickness will give you the right parameters to get your welds done right!

The Transmig 555i has been designed to be durable and rugged to suit the most demanding of environments across heavy fabrication, mining, oil and gas, civil construction, ship building and defence, structural steel set-ups and repair and maintenance.