ESAB ET200iP Pro

The days of entry-level mediocrity are over. With unconventional features, unprecedented performance, and an all new industrial design, Rogue ushers in a new era of welding capability that will force you to rethink everything you expect from a portable GTAW machine at this price point. Are you ready to go rogue?

PERFORMANCE.
Rogue’s next-level technology gives you precise, professional and consistent control for a smooth, stable performance every time.

High-frequency TIG start keeps you from experiencing failure on ignition.

Advanced TIG controls including gas pre-flow, start current, end current and gas post-flow allow full cycle control to match every application.
Monitor and easily control ramp up time and down slope time. Pulse up to 500 Hz for perfect control of heat input.

POWER.
Throw away your preconceptions about welders in this class = Rogue’s power stacks up against machines twice its price.

Power Fact Control (PFC) technology allows for a highly efficient and steady arc that is resistant to power fluctuations.

With up to 25% duty cycle at 200 A, the Rogue has the strength to crush jobs on thicker materials.

STRENGTH.
No other machine at this price point comes close to matching Miniarc Rogue’s strength.

Its robust and rigid fiberglass-molded housing is built to withstand impact after impact, in the shop or in the field.

Like every ESAB machine, Miniarc Rogue comes with our industry-leading three-year warranty for unbeatable peace of mind.

Sayonara, cheaply constructed welders.

PORTABILITY.
No other machine at this price point comes close to matching Rogue’s strength. Its robust and rigid fiberglass-molded housing is built to withstand impact after impact, in the shop or in the field. Rogue is durable and weather resistant, with an IP23S rating for use in tough outdoor applications.

USABILITY.
Rogue’s compact and lightweight design makes it easy to carry from job to job. It weighs in at just 21.2 lbs, an its sturdy handle and included shoulder strap make it more comfortable than ever before to go wherever you need to.

Plus, its stable arc performance means you can use long extension cables to work in even the most remote locations without affecting weld quality.

It is the definition of a portable workhorse.

Package Contents
• Power source with 3 m (10 ft) mains cable and plug
• Shoulder strap
• TIG torch SR-B 26 type with flexible neck and potentiometer 4m (13 ft)
• A set of wear parts including tungsten electrode
• SMAW electrode holder 3 m (10 ft)
• Work lead with clamp 3 m (10 ft)
• Gas regulator
• Power adapter 115V/230 V.
• Carry case

Download

Produk Lainnya

ESAB Rebel EMP 215ic

The ESAB Rebel EMP 215ic has everything you need to get the job done – start to finish – and all controlled via a 4.3in LCD screen! This true Multi-Process welder means that whether you are welding MIG/MAG with solid or Flux-Cored wire, MMA – with even the most tricky electrodes, or Lift TIG, Rebel will perform like it was born to run that process.

ESAB Rebel 215ic is a compact, portable welder ideal for transporting from jobsite to jobsite. With the Smart MIG function it doesn’t matter whether you have been welding for 2 years or 20 years, Rebel will make your job easier. For the novice, there is basic mode, which makes setup simple. For the experienced, the exclusive, built-in arc control that constantly monitors your weld and adapts for superior, repeatable welds.

Backed by a 3-year warranty, the ESAB Rebel EMP 215ic is equipped with a host of features; Adjustable Burnback, Inductance and Trigger Hold, Arc Force, Hot Start, Pre & Post Flow, Weld Parameter Storage, VRD, a Quick Connect gas connection, a solid cast integrated wirefeeder and an IP23S rated robust casing.

CIGWELD Transmig 175i+ Power Pack

The CIGWELD TRANSMIG 175i+ is a self-contained single phase multiprocess welding inverter that is capable of performing GMAW/FCAW (MIG), MMAW (Stick) and GTAW (Lift TIG) welding processes.

Kennedy LEOPARD SYNERGIC MIG 170A

Easy setup and usage in the use of various types of materials (steel, stainless steel, aluminium) and in all possible applications, from maintenance to installation works. Fit for NO GAS/Flux welding, it can be transformed into Mig-Mag with the optional Gas Connection kit (KEN8852400K).

• Capable of welding up to 8mm material.
• Capable of using 0.6 - 0.9mm wires including flux cored.
• Polarity reversal for GAS Mig-Mag/Brazing welding
• Compact & light
• Microprocessor controlled
• Easy to use & excellent results
• Gas / Gasless and Brazing capabilities
• Generator safe
• Thermal overload switch

Kennedy Collet, 2.4mm, To Suit Type WP17/18/26

Designed to hold Tungsten electrodes and transfer current whilst using your TIG torch, these collets are ideal for use on WP17, WP18 and WP26 torches. Available in varying sizes to suit your required wire size, they are crucial in upholding the quality of your TIG welding torch.

Features and Benefits
• An economical way to keep your TIG torch operating to its full potential
• Manufactured to a high standard to ensure a steady current and provide a stable arc needed for precision welding
• Available in various sizes to ensure you find the correct fit for your torch

Typical Applications
• Ideal for use with WP17, WP18 and WP26 TIG welding torches to hold the Tungsten as you weld

ESAB ET200iP Pro

Informasi Pemesanan