One of the many benefits of the FPS® 7000 Facemask is the option of fitting a head up display. Always within the field of view the head up display allows easy monitoring of the cylinder contents without any manual action by the wearer.
Easy to fit and remove The display fits easily into the FPS 7000 facemask, and can be quickly fitted without the need for tools, saving time during maintenance. In an emergency you can transfer the HUD between facemasks in a matter of seconds.
Well Protected The HUD is well protected in the facemask and can not be damaged by heat, shocks, humidity or chemicals.
Long battery life Providing on average 360 hours of use and easily changed without the need for tools.
Wireless operation The transmitter unit wirelessly transfers data to the facemask, avoiding time consuming connection of cables, reducing costs and connection errors.
Easy to read LED's Red, amber and green LEDs provide precise information about your cylinders air pressure at all times. The display automatically adapts to ambient brightness enabling clear indication of pressure information , even under poor lighting conditions.
Additional low air pressure warning In addition to the SCBA's primary low pressure alarm a red LED on the HUD flashes if the cylinder pressure reaches the low pressure warning threshold. This provides the wearer with an additional warning.
The oxygen self-rescuers Dräger Oxy 3000 and 6000 MK III are easy and fast to handle under extreme conditions and are service-free for up to 10 years while being worn. The unique safety eye provides you the ability to check the device without additional tools. The Oxy series provides breathing protection according to the highest standards since decades - made in Germany.
- Continuous detection of flammable gases in explosion hazardous area with flame proof structure - Self diagnosis function with built-in Microprocessor - Detection gas from low to high concentration owing to various detection principle - Stable quality and proved detection principle for service life - Built-in back light LCD or OLED display - Easy Configuration of monitoring by HART communication - Auto calibration and program setting with a magnet bar - 4-20mA (Current source or Sink) output signal - Calibration and maintenance by one-man - With the alarm unit (GTL-100): - Normal : Green LED - Alarm : Red LED, Buzzer(95 dB) - Trouble : Yellow LED
The innovative Dräger X-act® 7000 analysis system consists of Dräger MicroTubes and an opto-electronic analysis device that lets you precisely measure gases in the low ppb range. It gives you precise results right on site, replacing slow, expensive lab analyses. It's extremely easy to use: insert the Dräger MicroTubes, start measuring, then read out the test result.