Drager Bodyguard® 1500

Dräger Bodyguard® 1500 is an automatic wireless PASS system which increases wearer safety in potentially hazardous situations. The system draws attention to colleagues in distress by generating distinctive visual and acoustic alert signals and features wireless data transmission from the pressure gauge to the PASS device.

Enhanced safety
The rugged Dräger Bodyguard 1500 personal alert safety system is designed for use by both professional and volunteer firefighters. During normal operation twin blue fascia LED’s show the position of the wearer – even in conditions of poor visibility. The backlit Tx Gauge wirelessly transmits its pressure data to the PASS device and also to the Dräger FPS 7000 Head-Up-Display if being used. This feature provides automatic visual notification from the Tx Gauge and acoustic notification from the PASS when the air supply drops below user-defined limits, such as 2/3 or 1/3. If the pressure drops below 56 bar, the PASS device emits a warning signal. The backlight of the Tx Gauge begins to flash a visual alert. Should a firefighter remain motionless for more than 20 seconds, a pre-alert sounds. If this pre-alert is not cancelled by the user, the full alert (distinctive acoustic and visual alarms) is activated, letting other members of the team know that a fellow firefighter is in distress.

Wireless operation
Following an initial pairing procedure, a single Tx Gauge is uniquely paired to a Bodyguard 1500 PASS device. When the cylinder valve of the SCBA is opened, the Tx Gauge automatically sends a wakeup signal to the paired PASS device ensuring that it is activated before the firefighter enters the hazardous zone. Advanced wireless technology reduces the need for additional cables or wires, reducing potential snagging hazards.

Durable design
The Bodyguard 1500 is a robust and lightweight system, capable of withstanding adverse environmental conditions commonly encountered by fire rescue teams. It is complying with the requirements of EN 137:2006 (type 2) for use in temperatures ranging from -30 °C up to 60 °C. The PASS device is supplied with both a clamp and a crocodile clip so that it can be worn at either the shoulder or the waist of the wearer. Large buttons make operation easy, even with gloved hands. Dräger Bodyguard 1500 has been designed with battery logistics very much in mind, to give up to 12 months of use before replacementsare needed, enabling change-over during annual service resulting in minimised downtime.

Flexibility for the future
The Dräger Bodyguard 1500 PASS unit can also be used as a standalone personal alert safety system without the Tx Gauge. Alternatively, upgrade kits are available which let you install Tx Gauges onto your existing SCBAs of the Plus and PSS series.

Datalog of incident history and personalised settings
The PASS device and the Tx Gauge both come with full data log functionality allowing downloads of incident history and the configuration of individual motion sensor timings using the Dräger RFID PC Link Module and a PC.

Download

Products Lainnya

ISC Radius® BZ1 Area Monitor

The Radius BZ1 is a rugged, portable area monitor that's always working, even when you're not. This area monitor can be deployed for up to 50 days in the world's harshest environments and features actionable alarms that can cut through even the busiest work areas. With local and remote monitoring options, everyone from teams nearby to off-site safety mangers will know exactly how to respond.

Summitech S600

PRODUCT CODE : S600
MATERIAL COATING : LIQUID SILICONE
LINER : NYLON 66
INNER LAYER DESIGN : CORAL AIR@ ADIABATIC LINER
BINDER : SILICONE LEATHER
COLOR : WHITE, GREY

Drager Oxy SR Series

The Dräger Oxygen Self Rescuers are easy and fast to handle, even under extreme conditions. The devices are service-free for up to 10 years while being worn. The unique safety eye provides you the ability to check the device without additional tools.

The Oxy series provides breathing protection according to the highest standards since decades - made in Germany.

Halo Mechanical Hazard Gloves, Black, Nylon Liner, Polyurethane Coating, EN388: 2016, 4, 1, 4, 1, X, Size 8

These PU Coated Nylon Lined Gloves from the Halo® PPE range have been designed with comfort and performance in mind. Halo® products are manufactured to suit a diverse workforce and ensure everyone is protected. By choosing Halo® you are supporting worthwhile charities including Mind for Mental Health and The Diversity Trust. Where possible, single-use plastic bags have been removed from Halo® packaging to reduce our impact on landfill and on the environment.

These nylon-lined gloves are polyurethane coated on the palm and offer dexterity and comfort when handling an array of components. Available in a wide range of sizes and colours to suit your exact needs.

Features and Benefits
• 13 gauge seamless nylon liner allows for excellent dexterity and protection as well as comfort
• Polyurethane (PU) coated palms ensure great dexterity even when dry or slightly damp
• Knitted wrists prevent the ingress of dirt and debris
• Colour-coded binding for easy size identification
• Available in white, grey, or black to suit your preferences
• Available in a wide range of sizes to suit your needs

Standards
• Halo® products are BSI tested
• EN 388:2016 4.1.4.1.X.

Drager Bodyguard® 1500

Informasi Pemesanan