Products

HSS multi diameter step drills produce good quality holes in a wide variety of sheet metal, using either a bench drill or light pedestal drilling machine. Manufactured from high speed steel, they offer sound rigidity, strength and stability when machining. Each tool cuts parallel holes in a range of specific sizes and is compatible with materials up to 1/8" (3mm) thick.

Features and Benefits
• High speed steel construction for greater strength, rigidity and stability
• Excellent wear and heat resistance for prolonged tool life
• Cuts parallel holes in sheet metal

Typical Applications
• Drilling
• Sheet metal

Notes
• Available sizes 1-12mm to 6-37mm

The Ken-Grip® 1.4in square drive sockets offer a new standard of performance with the ability to grip up to 95% of a rounded fastener. It has a unique patented design that grips even worn and rusted fasteners without damaging them and can be used on a wide range of fasteners, including non-metric hexagons and E-Torx Drive sizes. Double knurl feature gives a high grip which is essential for quick tool change when hands are greasy or oily. Manufactured from chrome vanadium steel, the sockets and accessories are aluminium free and fully chrome plated for an easy clean finish.

Features and Benefits
• Grips fasteners which are up to 95% rounded off for versatility of use
• Will not damage even worn or rusted fasteners for safe use every time
• Also fits a wide range of non-metric Hexagons and E-Torx® Drive Sizes allowing you to use the product in a wider scope
• Fully chrome plated finish for easy clean
• Unique 'Double-Knurl' design for high grip even when fingers are oily or greasy
• Aluminium-free finish for non-sparking action
• Available in a variety of metric sizes to suit your needs

Typical Applications
• DIY
• Engineering
• Plumbing
• Construction

Standards
• Conform to DIN3124

Kennedy tapered gauges are ideally suited for the rapid accurate checking of the inside diameters of tubing, slot widths, hole sizes, setting calipers etc.

Manufactured from spring tempered steel with 0.1mm increments. Rustless properties allow for a longer tool lifespan. The satin chrome anti glare finish combined with permanent black figures provides easy to read measurements



Features and Benefits

• Manufactured from spring tempered steel for increased durability

• Rustless properties allow for a longer tool lifespan

• Satin chrome anti glare properties and black figures for easy to read measurements



Typical Applications

• Diameters

• Tubing

• Slots

• Holes

Metric & Inch Reading - Graduation: 0.02mm/0.001"

Incorporating Quadri feature - gives outside, inside, depth and step readings.

Fine adjustment feature allows improved sensitivity of slider movement.

14° vernier face angle reduces parallax.



Satin chrome finish with clear easy read graduations.

The Equal Tees ensure quick and simple tube insertion whilst also boasting a compact lightweight design with a well proven tube retaining system. The tapered threads have a re-usable thread seal and parallel threads have a rubber washer. The main body is manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar. Available in a variety of sizes to suit your needs.





Features and Benefits


• Suited for use with nylon and polyurethane tubing for versatility of use


• Available in a range of sizes to suit your needs


• Quick and easy tube insertion with a solid seal


• Lightweight design due to the acetal construction, stainless steel retaining ring and nitrile tube seal and acetal resin tube release collar





Typical Applications


• Engineering


• Plumbing


• Garages

The J100 Series are general purpose HSS straight shank drills with a black oxide finish. Ideal for applications involving steel (including cast steel) cast iron (including malleable cast iron) as well as nickel, brass aluminium alloys and graphite. Their 118° point allows for precise hole alignment and reliable cutting performance whilst the black oxide coating helps reduce heat by retaining coolant on the tool surface. The coating also helps reduce the risk of the tool staining.

Features and Benefits
• High speed steel construction for increased tool durability
• Point angle of 118° for precise holemaking and precision cutting
• Black oxide coating helps aid chip flow, reduce heat and prevent staining
• Ideal for applications involving steel, iron, nickel, brass, aluminium alloy and graphite

Typical Applications
• Cutting and drilling
• Ferrous materials
• Steel
• Iron
• Nickel
• Brass
• Aluminium alloy
• Graphite

Notes
• Available in sizes 0.25mm -20.00mm

Standards
• Manufactured to BS 328/DIN338RN

Ideal for assembly and servicing of small precision mechanisms associated with electrical, electronic, ignition and refrigeration work. Sockets have a knurl feature to give a high grip which is essential for a quick tool change when your hands are greasy/oily. Six point bi-hexagon side drive design gives a higher torque than normal sockets, grips worn nuts and will not round off existing nuts. Manufactured from chrome vanadium and are fully chrome plated with a mirror finish and aluminium-free. Chamfered leading edge ensures easy fastener location. Sold as a 29 piece set with metric and imperial sockets.

Features and Benefits
• Mirror finish repels dirt as well as looking aesthetically clean
• Chrome vanadum steel construction makes the product hardy
• Supplied in a snap shut red case to keep all your components together
• Delivers high torque with the double knurl design and side drive

Typical Applications
• Automotive
• Construction
• Repairs
• DIY

Wire scratch brushes designed to remove stubborn deposits.

Features and Benefits
• Cast steel bristles to remove paint, rust, dirt and stubborn deposits
• Plastic ergonomical handle design for hand comfort
• Hole on the end of the handle for easy storage

Notes
COT9066500K - Includes a scraper

This 51 piece set contains both metric and AF sized sockets, standard and deep for versatility of use. Each piece is manufactured from chrome vanadium steel with a mirror finish and aluminium free construction and has a hexagon 6 point design. Supplied in a plastic carry case.

Features and Benefits
• Manufactured from chrome vanadium steel for durability
• 51 piece set is highly comprehensive for scope of use
• Mirror finish and aluminium free construction repels dirt and makes the product suited for non-sparking applications
• Supplied in a moulded plastic storage case for organisation of your components

Contents
• Standard Sockets (Metric): 4, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm
• Deep Sockets (Metric): 6, 7, 8, 9, 10, 11, 12, 13, 14mm
• Standard Sockets (AF): 3/16in., 7/32in., 1/4in., 9/32in., 5/16in., 11/32in., 3/8in., 7/16in., 1/2in., 9/16in.
• Deep Sockets (AF): 3/16in., 7/32in., 1/4in., 9/32in., 5/16in., 11/32in., 3/8in., 7/16in., 1/2in., 9/16in.
• Accessories: ratchet handle (rubber grip), 100mm sliding T-handle, 100 and 250mm extension bars, 50 and 150mm wobble extensions, universal joint, spinner handle, 150mm flexible extension, swivel handle rubber grip

Typical Applications
• Automotive
• Construction
• Engineering

A set of three Sherwood HSS Taps ideal for the general purpose option for thread cutting in most materials including steel, some stainless steels, cast irons and non-ferrous materials such as Aluminium, Brass and many others.

Features and Benefits
• Manufactured from durable high speed steel
• Precision ground flutes for accurate thread cutting
• Features class 2 thread forms with medium fit tolerance
• Manufactured with a bright finish

Typical Applications
• Tapping
• Steel
• Brass
• Aluminium
• Engineering
• Manufacturing

Standards
• Tap dimensions to ISO529
• Thread Forms are Class 2 medium fit tolerance
• Straight Flute Individual Sizes IS0 529

Notes
• Available in sizes 1.0 x 0.25mm - 48 x 5.00mm
• Set of 3 - 1 Taper, second and plug

Available in a range of sizes, this digital caliper is coolant, water and dust proof to IP67 level. It has a large LCD display, fast response speed, dual readout (mm/inch) and can be used for inside, outside, depth and step measuring. Also enables absolute and relative reading.



Extra batteries available - Order Code PAN9042505E 3V Lithium Metal cell

The Equal Tees ensure quick and simple tube insertion whilst also boasting a compact lightweight design with a well proven tube retaining system. The tapered threads have a re-usable thread seal and parallel threads have a rubber washer. The main body is manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar. Available in a variety of sizes to suit your needs.





Features and Benefits


• Suited for use with nylon and polyurethane tubing for versatility of use


• Available in a range of sizes to suit your needs


• Quick and easy tube insertion with a solid seal


• Lightweight design due to the acetal construction, stainless steel retaining ring and nitrile tube seal and acetal resin tube release collar





Typical Applications


• Engineering


• Plumbing


• Garages