Products

M12 FDGS-0
• More Power Than Pneumatic
• 0.3 HP Motor Output
• 3-MODE SPEED CONTROL

These abrasive paper sheets have silicon carbide, waterproof-resin bonded to paper. They are suitable for wet and dry use, making them versatile. There are a variety of grades in this range of sheets.

Features and Benefits
• Silicon carbide
• Ideal for wet and dry use
• Waterproof resin

Typical Applications
• Polishing
• Finishing
• Metals
• Plastics
• Paintwork
• Ceramics

M18 FSAGV125XPDB-0X0
• Generates Corded Power - Powerful POWERSTATE™ Brushless Motor spins at 8,500 RPM and allows the user to complete the toughest grinding and cutting applications
• Increased Control - Variable speed control for applications that require lower RPM grinding; 3500 - 8500 RPM
• 5 Speed Settings

Enjoy the benefits of this rugged and efficient 3/8" impact wrench, designed with the powerful single hammer clutch mechanism, aluminium body, and steel clutch housing. The CP6300-RSR is a lightweight tool that provides max reverse torque up to 243 Nm /180 ft.lb. This tool is designed to operate in assembly and disassembly applications in a variety of industrial environments. The CP6300-RSR series also has a ring socket retainer.

M18 ONERSAL-0
• 5400 Lumens of high quality light, Over a day of runtime
• Waterproof: Fully submersible up to a meter
• 5400 lumens up to 26 hours of runtime

48-22-8430
48-22-8431
48-22-8435
48-22-8436
• Part of the PACKOUT™ Modular Storage System
• Constructed with Impact Resistant Polymers
• Removable & Mountable Bins Included (48-22-8430, 48-22-8435)

Hot dip protective plastic coating moulds around the component or tool to provide 100% coverage and protect against impact and corrosion.

Features and Benefits
• Hot dip plastic coating moulds itself around the part to provide 100% coverage and protect against corrosion and impacts for up to ten years
• Easy part identity through the translucent coating
• Simple to remove by peeling off
• Once removed, leaves behind a thin oil film to provide short term protection against corrosion
• Removed coatings may be reused saving cost

Notes
• Each single block measures (L)-150mm (H)-50mm (W)-80mm
• Working temperature 130°C to 160°C (for optimum results 140°C to 145°C)

Warnings
• Never directly apply heat to melt the protective dip
• Always use with a suitable melting pot

Manufactured from M35 HSS and used for the deburring and chamfering of most metals and plastics. Features straight shanks and manufactured to BS 328 : Part 5 : 1983.

• Single hole head with nclusive angle of 90° for excellent cutting performance
• Manufactured from M35 HSS for increased toughness
• Uncoated with good heat and wear resistance

Typical Applications
•Countersinking

Standards
• Manufactured to BS 328 : Part 5 : 1983

Available in a wide variety of colours, these high quality PVC self-adhesive tapes are the cost effective and simple way of cordoning off areas and alerting your workforce of potential hazards or restricted areas. With a self-adhesive back for ease of applying.

Features and Benefits
• Durable due to weather resistant PVC construction
• Easy way to warn personnel of potential hazard areas
• Colour coded to suit varying applications
• Supplied in a roll with ample length of tape to use multiple times
• Available in varying colours to allow you to find the product to best suit your specific requirements

Typical Applications
• Black/Yellow: for low head room, obstructions to be avoided, changes in floor levels, mobile equipment and placing around warning notices
• Red/White: for locating fire equipment, placing around prohibition and indicating inflammable areas
• Green/White: for placing around fire escapes, safety equipment, first aid posters and equipment and breathing apparatus

World’s smallest, lightest and most portable dry-wells
• Smallest dry-wells in the world
• Ranges from –10°C to 375°C
• Accuracy to ±0.25°C, stability of ±0.05°C at 0°C
• RS-232 interface

Fluke Calibration's line of portable dry-wells is incredible. They’re the smallest, lightest, and most portable dry-wells in the world. And now they're better than ever!

The Dräger X-am® Pump is an external pump for the portable gas detectors Dräger X-am® 2500/2800 and X-am® 5000/5600/5800 – designed for clearance measurement, for example in tanks and shafts. The pump automatically switches on when it is connected to a running X-am® device. The change from pump mode to diffusion mode is fast and easy.

314D 230 x 280mm (9"x11") Sheets.
Aluminum oxide abrasive product rolls and sheets constructed on a J weight, durable cloth backing. For use in metalworking.

Features and Benefits
• Perfect for finishing, contouring, deburring and removing rust
• Versatile, durable sheet performs excellently on metal, wood and plastic surfaces
• Cloth backing is both flexible and durable enough for machine use
• Tear sheets by hand for convenient sizing and reduced waste