Drager X-am® Pump

The Dräger X-am® Pump is an external pump for the portable gas detectors Dräger X-am® 2500/2800 and X-am® 5000/5600/5800 – designed for clearance measurement, for example in tanks and shafts. The pump automatically switches on when it is connected to a running X-am® device. The change from pump mode to diﬀusion mode is fast and easy.

Easy to use
The pump is attached onto the X-am 2500/2800 and X-am 5000/5600/5800 and fastened with a clip. Pumping starts automatically once pump and running gas detection device are connected. The pump turns oﬀ automatically once it is removed from the device. Using the X-am with the pump has no eﬀect on the measuring performance for standard gases.

Charging via USB
The pump battery can be recharged using the micro USB port. A standard cellphone charger can be used for connecting. The charge status is indicated by an LED on the pump. A full charge requires approximately six hours.

Handy and robust
The pump’s easily manageable 17.5 cm device height and a weight of only 200 g permit easy carrying and stowage. The Dräger X-am pump is dust and water resistant according to the IP67 protection classification. It performs reliably even at temperatures down to -40 °C. The battery is solid cast to protect against damage due to dropping or impact.

Effective range of measuring results: with explosion protection
The pump can reach the ambient atmosphere in inaccessible places – up to a distance of 45 m, e.g. in channels, shafts, or tank systems. The pump has been optimised for hoses with a diameter of 3 mm – for fast response times and low power consumption.

The use of the pump in combination with a X-am device ensures you of consistently precise measuring results – even in the most demanding situations. Because the pump has an explosion protection approval for Ex zone 0. In combination with the Dräger X-am 2500/2800 and X-am 5000/5600/5800, which are likewise approved for Ex zone 0, the X-am pump allows for secure and continuous monitoring of enclosed areas.

Long operating time for long deployments
The pump is not only highly resilient on the outside but also inside. The battery capacity lasts for three workweeks at 8 measurements per day (i.e. up to 20 hours of continuous operation). Convenient: The operating time of the X-am is not decreased when the pump is in operation. Moreover, the entire pump operating time can be evaluated using CC-vision software.

Data logger
Pump operating time, charge status, battery warnings, and ﬂow alarm are displayed on the Dräger X-am and stored in the data logger. This makes it possible to display the results of the clearance measurements separate from the evaluations of personal monitoring.

Download

Products Lainnya

Drager X-pect® 8500 Goggles

The goggles Dräger X-pect® 8500 provide premium eye protection with a wrap-around design, low weight and perfect fit with prescription glasses. A closed sealing line between goggle and face provides full protection against dust and splashes. In addition, the goggles are very robust and can be easily combined with other protective equipment like Dräger half mask respirators.

ISC Tango® TX2 Two-Gas Monitor

Protect workers, reduce false alarms, and spend less time managing your gas detector fleet with the Tango TX2 Two-Gas Monitor. Unlike other two-gas monitors that use combination sensors, the Tango TX2 uses individual sensors to increase alarm accuracy so you can reduce unnecessary shutdowns and improve incident data quality.

Summitech M09 BO

PRODUCT CODE : M09 BO
COATING MATERIAL : Synthetic leather palm, PVC ultra grip palm patching.
LINEAR MATERIAL : Para Aramid, Polyester, Chloroprene
EXTERIOR FINISHING : Sewn TPR on fingers and back of hand, Reinforce thumb crotch upto index
CUFF STYLE : Adjustable chloroprene cuff with velcro
THICKNESS MM : N/A
LENGTH MM : 240-270 mm ± 10mm
COLOUR : Orange, Yellow & Black
SIZE/WRIST : 8, 9, 10, 11
PACKAGING : Pair packed with header card. 6 pairs in an inner box. 6 inner boxes (36 pairs) in a master

Drager Comfort Vest

Increased performance by up to four hours – without the need for elaborate preparation or logistics: when work gets hot, the Dräger Comfort Vest CVP 5220 is always ready to use as it delivers the cooling action itself. This means: no pre-freezing, no dipping into water, no risk due to dangerous circulating air – and no time loss.

Drager X-am® Pump

Informasi Pemesanan