Products

Manufactured from heavy-gauge steel with a blue painted finish, this range of component storage cabinets is ideal for use in industrial settings. Fitted with transparent plastic drawers that allow contents to be viewed when the drawer is closed. The lip on the rear of the drawer allows it to be opened fully without falling out. The cabinets can be stacked or mounted to the wall to maximise the use of storage space and can be purchased in various sizes and specifications to suit your needs.

Features and Benefits
• Constructed from heavy-gauge steel making for a robust product
• Stackable and wall-mounted properties allow you to maximise space
• Transparent polypropylene drawers are hard wearing
• Clear drawers to ensure you have instant visibility of your required component even when the drawer is shut
• Available in a variety of sizes to suit your requirements

Typical Applications
• Industrial
• Offices
• Workshops

Elbow Connector


Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.


Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.

Suited for the insertion and removal of fasteners and fixings using 1/2" square drive tooling, this range of 1/2" drive screwdriver socket bits are ideal for a host of applications. Made from chrome vanadium steel, fully chrome plated with a mirror finish, and aluminium-free, each product has an emphasis on longevity and high standards. All have ball retaining grooves on each face of the square drive and are available with various socket sizes and bit types.


Features and Benefits
• Available to purchase with varying socket sizes and bit types to ensure you find the right product to suit your needs
• Manufactured from chrome vanadium steel making for a robust product
• Each product is chrome plated to bolster resistance to corrosion, wear and tear, and general punishment
• Ball retaining groove on each face of the square drive

Typical Applications
• Ideal for use when inserting and removing fasteners and fixings in the following industries:
• Construction
• Automotive
• Engineering
• DIY
• Plumbing
• Electrical

Standards
• Conforms to DIN standards

Manufactured from a high-quality chrome vanadium steel, this range of 1/2" square drive standard extension bars is suited for a range of professional applications. Completed by a fully polished finish, the products also boast a knurled 'finger grip' for user comfort and control when using.

Features and Benefits
• Manufactured from chrome vanadium steel for durability
• Fully polished finish repels dirt and prevents grime from adhering to the tool for easy cleaning
• Available in a range of sizes to suit individual needs
• Knurled 'finger-grip' allows for heightened control and grip when using

Typical Applications
• Automotive
• Engineering
• DIY
• Plumbing

3 Shelf Trolley
Super strong polyethylene moulded. Constructed from a non-conductive material which is unaffected by battery acid, solvents and cleaning solutions. Size between shelves is 350mm, 4x 100mm non- marking rubber swivel castors, 2 with brakes. Manufacturers 10 year guarantee.

Overall dimensions (L x W x H): 610 x 458 x 840mm.
Load Capacity: 150kg.

Features and Benefits
• Constructed from polypropylene making it resistant to most substances and suitable for use in most situations
• 4x 100mm castors (two with brakes) allow greater manoeuvrability
• High load capacity of 150kg allowing for more items to be moved at a time

Shaft mounted flap wheels can be used in portable air or electric power tools, including die grinders, flexible shafts and drills.

Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting.

Features and Benefits
• Recessed hub design for maximum access in tight corners
• Highly efficient design
• Durable construction means the flap wheels last longer than others on the market

Typical Applications
• Final finishing of metal surfaces
• Miss-match removal and de-burring on machined components.
• Blending and finishing tool, tubes, dies, moulds, channels
• Edge blending and cleaning. Surface preparation prior to painting and plating
• Can be used on metals, woods, plastic and fibreglass

Notes
• Images are for illustration purposes only

Highly efficient, sturdy headband torch with four different operating modes. Perfect for a wide range of applications where effective hands-free lighting is required.

Features and Benefits
• Four lighting modes: 4 LED's on (power saving mode), 8 LED's on, 12 LED's on, 12 LED's flashing
• Headlamp body tilts up to 90 degrees
• Impact resistance (drop test) 1m for resilience
• Operating temperature of -20 - 50°C for versatility in use
• IPX-4 waterproof and designed for use outdoors in heavy rain

Notes
• Requires 3x AAA batteries (not included)

Cylindrical-End Cutting
All sizes are nominal with a 6mm shank unless other wise stated.

Cut Numbers:

Cut 3 - Rapid Cut.
for use on softer non ferrous and plastic materials, i.e aluminium, fibreglass, plastics, hard rubber and zinc alloy,

Cut 6 - Double Cut.
Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use.

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc.
up to HRC65 hardness.

Please note:
• Work piece and tools should always be steady and well supported.
• Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'.
• Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used.
• Always ensure that the tool is rated to the recommended operating speed of the burr.

When it's not just infrared.



Introducing Fluke infrared cameras, the first with full radiometry technology – the RSE series. Packed with advanced features and plug-in software for MATLAB® and LabVIEW® , these tools are ideal for continuous streaming and analysis of infrared data.



Designed for your research, science and engineering needs, enhance your testing and quality assurance procedures by attaching the RSE600 to your workstation. Continuously stream up to 60 frames per second of data directly to your computer to monitor minute temperature differences, as well as analyze remote video frame-by-frame from the SmartView® desktop software . Get an even more perfect screen with add-on lenses to target different applications (analyzing from a distance, or getting detailed close-ups).



Don't just look at the heat. Stream, measure and analyze its power as well.



With plug-ins for MATLAB® and LabVIEW® , the RSE Infrared Camera is perfect for testing and development. Looking for more robust software to monitor and archive processing manufacturing data 24/7? We recommend the ThermoView® series from Fluke Process Instruments. Check out a quick comparison

Gembok Travel dengan Lebar 1-3/16in (30mm) Atur Kombinasi Anda Sendiri

Fitur Produk:
• Body logam tahan lama dengan lebar 1-3/16in (30mm)
• Mudah diatur & disetel ulang
• Mengizinkan pemeriksa oleh TSA untuk memeriksa dan mengunci kembali bagasi, tanpa merusak kuncinya
• Kenyamanan kombinasi set-your-own 3-digit
• Lebar Body: 1-3/16in (30mm)
• Dimensi keseluruhan A: 3mm B: 19mm C: 13mm

Cut-9 chipbreaker rotary burrs are designed for fast stock removal and improved control for reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Features and Benefits
• Solid carbide construction
• Enables fast stock removal on hard materials
• Allows for improved control and reduced chips

Typical Applications
• Deburring
• Polishing
• Cast iron
• Cast steel
• Carbon steel
• Alloy steel
• Stainless steel
up to HRC65 hardness.

Notes
• Work piece and tools should always be steady and well supported.
• Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'.
• Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used.
• Always ensure that the tool is rated to the recommended operating speed of the burr.

This heavy duty shelving and racking system is an ideal way of storing your heavier goods. The uprights and beams are made of heavy gauge steel with a corrosion resistant powder coated finish for durability. Supplied with rubber feet to protect the floor. Easy interlocking assembly, with just two nuts and bolts, joining one upright frame to the next. The product can also be arranged in three ways: one tall rack with 4 shelves, two lower racks, or three sections arranged in a workbench to suit your requirements. Each shelf can hold up to 455kg UDL and the product comes with 4 shelves.

Features and Benefits
• Possesses 4 adjustable shelves to suit your requirements
• Each shelf can hold up to 455kg UDL for heavy duty storage of your items
• Can be arranged in three different ways depending on your preferences including one tall rack with 4 shelves, two lower racks, or three sections arranged in a workbench
• Manufactured from heavy gauge steel for maximum resilience
• Powder coated finish is corrosion resistant to bolster overall product longevity
• Rubber feet on the base to protect your flooring

Typical Applications
• Industrial
• Retail
• Institutional
• Warehousing