kategori Produk
BRAND
FlukeKennedyMilwaukeeMakitaYorkBottKobe3MSealeyFlexovitSherwoodGranlundDragerGysSitesafeMatlockSenatorSuper StrengthChicago PneumaticPanasonicYamotoKennedy-ProSummitechWD 40KengripSwissBurrEdisonSolent Spill ControlKennedy Red-Hot-DipKobe Blue LineKobe Red LineHaloTuffsafeIndexaAvonYamaloyCotswoldSwisstechAtlas WorkhokdersThorOxfordRutlandCheetahMaster LockESABCIGWELDMorescoDiscfloCRCGastronMSASiemensISCSchneiderDR OSHA
Produk
Kategori Produk
Elbow Connector
Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.
Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.
Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.
Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.
Gembok Travel dengan Body Aluminum 40mm ? ?Set Your Own Combination?
Fitur Produk:
• Bodi aluminium solid dengan lebar 40mm untuk daya tahan
• Shackle baja berlapis krom untuk ketahanan potong
• Kenyamanan kombinasi 4-digit set-your-own memungkinkan ribuan kemungkinan kombinasi
• Lebar Body: 40mm
• Dimensi, A: 6mm B: 27mm C: 22mm
Fitur Produk:
• Bodi aluminium solid dengan lebar 40mm untuk daya tahan
• Shackle baja berlapis krom untuk ketahanan potong
• Kenyamanan kombinasi 4-digit set-your-own memungkinkan ribuan kemungkinan kombinasi
• Lebar Body: 40mm
• Dimensi, A: 6mm B: 27mm C: 22mm
2 lights in 1: 5W COB as a work/ inspection light and 1 LED light in the top as a torch.
Features and Benefits
• 1 x Li-ion battery (included)
• ABS plastic with rubberised finish
• Beam distance: 20m
• Foldaway hanging hook
• USB and micro USB ports
• Includes USB charging cable 1.5m
• Integrated magnet on the back
• Adjustable magnetic base
• Working time: 3-4 hrs
• Charge time: 5-6 hrs
• Impact Resistance (drop test) 1m
• Operating temperature -20 - 50°C
• IPX-4 waterproof and designed for outside use in heavy rain
Features and Benefits
• 1 x Li-ion battery (included)
• ABS plastic with rubberised finish
• Beam distance: 20m
• Foldaway hanging hook
• USB and micro USB ports
• Includes USB charging cable 1.5m
• Integrated magnet on the back
• Adjustable magnetic base
• Working time: 3-4 hrs
• Charge time: 5-6 hrs
• Impact Resistance (drop test) 1m
• Operating temperature -20 - 50°C
• IPX-4 waterproof and designed for outside use in heavy rain
Shaft mounted flap wheels can be used in portable air or electric power tools, including die grinders, flexible shafts and drills.
Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting.
Features and Benefits
• Recessed hub design for maximum access in tight corners
• Highly efficient design
• Durable construction means the flap wheels last longer than others on the market
Typical Applications
• Final finishing of metal surfaces
• Miss-match removal and de-burring on machined components.
• Blending and finishing tool, tubes, dies, moulds, channels
• Edge blending and cleaning. Surface preparation prior to painting and plating
• Can be used on metals, woods, plastic and fibreglass
Notes
• Images are for illustration purposes only
Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting.
Features and Benefits
• Recessed hub design for maximum access in tight corners
• Highly efficient design
• Durable construction means the flap wheels last longer than others on the market
Typical Applications
• Final finishing of metal surfaces
• Miss-match removal and de-burring on machined components.
• Blending and finishing tool, tubes, dies, moulds, channels
• Edge blending and cleaning. Surface preparation prior to painting and plating
• Can be used on metals, woods, plastic and fibreglass
Notes
• Images are for illustration purposes only
Manufactured from a high-quality chrome vanadium steel, this range of 1/2" square drive standard extension bars is suited for a range of professional applications. Completed by a fully polished finish, the products also boast a knurled 'finger grip' for user comfort and control when using.
Features and Benefits
• Manufactured from chrome vanadium steel for durability
• Fully polished finish repels dirt and prevents grime from adhering to the tool for easy cleaning
• Available in a range of sizes to suit individual needs
• Knurled 'finger-grip' allows for heightened control and grip when using
Typical Applications
• Automotive
• Engineering
• DIY
• Plumbing
Features and Benefits
• Manufactured from chrome vanadium steel for durability
• Fully polished finish repels dirt and prevents grime from adhering to the tool for easy cleaning
• Available in a range of sizes to suit individual needs
• Knurled 'finger-grip' allows for heightened control and grip when using
Typical Applications
• Automotive
• Engineering
• DIY
• Plumbing
Fluke 719Pro Electric Pressure Calibrator sources, simulates, and measures mA signals and more
The 719Pro includes a full functioning loop calibrator that sources, simulates and measures mA signals and more making it the ideal test tool for calibrating high accuracy transmitters, pressure switches and pressure gauges.
Get the ultimate in measurement flexibility with the large backlit screen, which displays three parameters at once:
- Pressure measurement from internal or external sensor
- Sourced/simulated or measured mA values
- Temperature measured by optional RTD probe
The 719Pro includes a full functioning loop calibrator that sources, simulates and measures mA signals and more making it the ideal test tool for calibrating high accuracy transmitters, pressure switches and pressure gauges.
Get the ultimate in measurement flexibility with the large backlit screen, which displays three parameters at once:
- Pressure measurement from internal or external sensor
- Sourced/simulated or measured mA values
- Temperature measured by optional RTD probe
Cylindrical-End Cutting
All sizes are nominal with a 6mm shank unless other wise stated.
Cut Numbers:
Cut 3 - Rapid Cut.
for use on softer non ferrous and plastic materials, i.e aluminium, fibreglass, plastics, hard rubber and zinc alloy,
Cut 6 - Double Cut.
Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use.
Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.
Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc.
up to HRC65 hardness.
Please note:
• Work piece and tools should always be steady and well supported.
• Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'.
• Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used.
• Always ensure that the tool is rated to the recommended operating speed of the burr.
All sizes are nominal with a 6mm shank unless other wise stated.
Cut Numbers:
Cut 3 - Rapid Cut.
for use on softer non ferrous and plastic materials, i.e aluminium, fibreglass, plastics, hard rubber and zinc alloy,
Cut 6 - Double Cut.
Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use.
Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.
Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc.
up to HRC65 hardness.
Please note:
• Work piece and tools should always be steady and well supported.
• Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'.
• Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used.
• Always ensure that the tool is rated to the recommended operating speed of the burr.
Gembok Travel dengan Lebar 1-3/16in (30mm) Atur Kombinasi Anda Sendiri
Fitur Produk:
• Body logam tahan lama dengan lebar 1-3/16in (30mm)
• Mudah diatur & disetel ulang
• Mengizinkan pemeriksa oleh TSA untuk memeriksa dan mengunci kembali bagasi, tanpa merusak kuncinya
• Kenyamanan kombinasi set-your-own 3-digit
• Lebar Body: 1-3/16in (30mm)
• Dimensi keseluruhan A: 3mm B: 19mm C: 13mm
Fitur Produk:
• Body logam tahan lama dengan lebar 1-3/16in (30mm)
• Mudah diatur & disetel ulang
• Mengizinkan pemeriksa oleh TSA untuk memeriksa dan mengunci kembali bagasi, tanpa merusak kuncinya
• Kenyamanan kombinasi set-your-own 3-digit
• Lebar Body: 1-3/16in (30mm)
• Dimensi keseluruhan A: 3mm B: 19mm C: 13mm
3 Shelf Trolley
Super strong polyethylene moulded. Constructed from a non-conductive material which is unaffected by battery acid, solvents and cleaning solutions. Size between shelves is 350mm, 4x 100mm non- marking rubber swivel castors, 2 with brakes. Manufacturers 10 year guarantee.
Overall dimensions (L x W x H): 610 x 458 x 840mm.
Load Capacity: 150kg.
Features and Benefits
• Constructed from polypropylene making it resistant to most substances and suitable for use in most situations
• 4x 100mm castors (two with brakes) allow greater manoeuvrability
• High load capacity of 150kg allowing for more items to be moved at a time
Super strong polyethylene moulded. Constructed from a non-conductive material which is unaffected by battery acid, solvents and cleaning solutions. Size between shelves is 350mm, 4x 100mm non- marking rubber swivel castors, 2 with brakes. Manufacturers 10 year guarantee.
Overall dimensions (L x W x H): 610 x 458 x 840mm.
Load Capacity: 150kg.
Features and Benefits
• Constructed from polypropylene making it resistant to most substances and suitable for use in most situations
• 4x 100mm castors (two with brakes) allow greater manoeuvrability
• High load capacity of 150kg allowing for more items to be moved at a time
Highly efficient, sturdy headband torch with four different operating modes. Perfect for a wide range of applications where effective hands-free lighting is required.
Features and Benefits
• Four lighting modes: 4 LED's on (power saving mode), 8 LED's on, 12 LED's on, 12 LED's flashing
• Headlamp body tilts up to 90 degrees
• Impact resistance (drop test) 1m for resilience
• Operating temperature of -20 - 50°C for versatility in use
• IPX-4 waterproof and designed for use outdoors in heavy rain
Notes
• Requires 3x AAA batteries (not included)
Features and Benefits
• Four lighting modes: 4 LED's on (power saving mode), 8 LED's on, 12 LED's on, 12 LED's flashing
• Headlamp body tilts up to 90 degrees
• Impact resistance (drop test) 1m for resilience
• Operating temperature of -20 - 50°C for versatility in use
• IPX-4 waterproof and designed for use outdoors in heavy rain
Notes
• Requires 3x AAA batteries (not included)
Gembok Travel dengan Lebar 32mm Atur Kombinasi Anda Sendiri. Diterima TSA dengan tag identifikasi; Biru
Fitur Produk:
• Bodi metal selebar 32mm untuk ketahanan maximum
• Cat pernis biru
• Shackle baja berdiameter 3mm cocok untuk sebagian besar ritsleting bagasi
• Kenyamanan kombinasi set-your-own 3-digit
• Mengizinkan pemeriksa oleh TSA untuk memeriksa dan mengunci kembali bagasi, tanpa merusak kuncinya
• Diakui di 29 negara secara global
• Tag identifikasi pribadi yang terintegrasi dan dapat ditarik
• Lebar Body: 32mm
• Dimensi keseluruhan A: 3mm B: 19mm C: 11mm
• Warna: Biru
Fitur Produk:
• Bodi metal selebar 32mm untuk ketahanan maximum
• Cat pernis biru
• Shackle baja berdiameter 3mm cocok untuk sebagian besar ritsleting bagasi
• Kenyamanan kombinasi set-your-own 3-digit
• Mengizinkan pemeriksa oleh TSA untuk memeriksa dan mengunci kembali bagasi, tanpa merusak kuncinya
• Diakui di 29 negara secara global
• Tag identifikasi pribadi yang terintegrasi dan dapat ditarik
• Lebar Body: 32mm
• Dimensi keseluruhan A: 3mm B: 19mm C: 11mm
• Warna: Biru
Shaft mounted flap wheels can be used in portable air or electric power tools, including die grinders, flexible shafts and drills.
Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting.
Features and Benefits
• Recessed hub design for maximum access in tight corners
• Highly efficient design
• Durable construction means the flap wheels last longer than others on the market
Typical Applications
• Final finishing of metal surfaces
• Miss-match removal and de-burring on machined components.
• Blending and finishing tool, tubes, dies, moulds, channels
• Edge blending and cleaning. Surface preparation prior to painting and plating
• Can be used on metals, woods, plastic and fibreglass
Notes
• Images are for illustration purposes only
Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting.
Features and Benefits
• Recessed hub design for maximum access in tight corners
• Highly efficient design
• Durable construction means the flap wheels last longer than others on the market
Typical Applications
• Final finishing of metal surfaces
• Miss-match removal and de-burring on machined components.
• Blending and finishing tool, tubes, dies, moulds, channels
• Edge blending and cleaning. Surface preparation prior to painting and plating
• Can be used on metals, woods, plastic and fibreglass
Notes
• Images are for illustration purposes only