Products

Gembok LOTO Red Zenex Thermoplastic Safety, dengan Lebar 1-1/2in (38mm) dan Tinggi Shackle 3in (76mm)

Fitur Produk:
– Gembok Pengaman Termoplastik
– Lebar 1-1/2in (38mm), Tinggi 3in (76mm), dengan jarak bebas Shackle 3in (76mm)
– Didesain khusus untuk aplikasi penandaan penguncian
– Bodi kunci termoplastik yang tahan lama, ringan, dan tidak konduktif
– Sesuaikan di tempat dengan label permanen dan tertulis
– Kepatuhan terhadap arahan “One Employee, One Lock, One Key”
– Keamanan tinggi, disediakan untuk silinder pengaman
– Penahan kunci – memastikan bahwa gembok tidak dibiarkan terbuka
– Kunci berbeda, 6-pin tumbler dengan lebih dari 40.000 silinder penggantian kunci yang tersedia, Shelf – Pack 6, Master Carton Qty 36

York non-woven fibre hand pads are ideal for cleaning, blending and finishing applications. They are available in a range grades from non abrasive to coarse to suit any application. They are supplied in packs of 10 to ensure they can get you through any project.

Features and Benefits
• Available in a range of grades to suit any application
• Supplied in packs of 10 to ensure they can get you through any project

These extra-heavy-duty rotational moulded IBC (intermediate bulk container) spill pallets are for single or double IBC storage applications. 100% polyethylene construction, they're designed for total flexibility and ease of positioning.

Features and Benefits
• Contains spills to prevent accidents and waterway contamination
• Made from durable polyethylene to protect against the elements
• Fitted with grids for added support
• Forklift pockets in the base make for easy transport
• Corrosion-free and suitable for containing corrosive chemicals
• Removable decking assists cleaning
• Reusable for a cost-effective solution to spill control and chemical storage

Ideally adapted for working in restricted areas, this cordless impact wrench is lightweight (2.4 lbs - 1.1 Kg) and compact (6.3 in - 161 mm length). Its high power (84 ft.lbs - 115 Nm max torque) in reverse offers performance and durability. The SIDE 2 SIDE Single-hand forward / reverse operation and built-in LED are convenient for every day general mechanical applications in workshops. The CP8818 series is available as a bare tool or in packs with two batteries and one charger.

Gembok LOTO Red Zenex Thermoplastic Safety, dengan Lebar 1-1/2in (38mm) dan Tinggi Shackle 3in (76mm)
Fitur Produk:
– Gembok Pengaman Termoplastik
– Lebar 1-1/2in (38mm), Tinggi 3in (76mm), dengan jarak bebas Shackle 3in (76mm)
– Didesain khusus untuk aplikasi penandaan penguncian
– Bodi kunci termoplastik yang tahan lama, ringan, dan tidak konduktif
– Sesuaikan di tempat dengan label permanen dan tertulis
– Kepatuhan terhadap arahan “One Employee, One Lock, One Key”
– Keamanan tinggi, disediakan untuk silinder pengaman
– Penahan kunci – memastikan bahwa gembok tidak dibiarkan terbuka
– Kunci berbeda, 6-pin tumbler dengan lebih dari 40.000 silinder penggantian kunci yang tersedia, Shelf – Pack 6, Master Carton Qty 36

The cordless impact wrench is compact (with a length of 6.1 in / 152 mm) and lightweight (4 lbs. / 1.8 kg), which makes it ideal for general mechanic applications, especially in restricted areas. The ergonomic thermoplastic rubber over-moulded handle offers comfort and a great grip. Performance is enhanced due to its power (150 ft.lbs – 205 Nm) to weight ratio. SIDE 2 SIDE single-hand forward/ reverse position is ergonomically designed for optimal usage. The CP8828 series is available as a bare tool or in packs with two batteries and one charger.

Bulkhead Adaptors


Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.


Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.

Type of Luminaire : Standard Floodlight (Pro) A Series
Set Model No : NYS12547LD2031
Type of Light Source : LED
Power Input : 432W
System Lumen Output : 65500 lm
Power Voltage : 200-242V
Lifetime : 40000H(L70)
CCT : 5000K
CRI : 70
Input Frequency : 50/60Hz
Dimming : non-Dimmable
Glare Cut Angle : 54deg.
Beam Angle : 34deg.
IP Rating : 65
Ambient Temperature : -20 - 35°C
Dimensions : 487mmx534mmx500mm
Body : ADC

Designed with spiral flutes and various lengths and forms to give high quality centre holes that suit most applications.

Features and Benefits
• High speed steel construction for increased tool hardness
• Spiral flutes for high quality centre holes

Standards
• Manufactured to BS 328 : Part 2 : 1986
• DIN 333A, ISO 866
• ISO 2540, ISO 2541

HILUBE

MORESCO-HILUBE, our high temperature lubricating oil, is used in harsh environments as the base oil of greases used with bearings subject to the high temperatures of automotive electrical components and as the lubricating oil used with bearings of machinery such as OA machinery, with bread ovens, and with the drive section of drying furnaces.

L-150 : Pale yellow High temperature region of ～270℃.For food machinery(tunnel oven), textile machinery(heat setter) and biaxial stretching machine(film tenter).
L-320 : Pale yellow High temperature region of ～270℃.For food machinery(tunnel oven), textile machinery(heat setter) and biaxial stretching machine(film tenter).
L-560 : Pale yellow High temperature region of ～270℃.For food machinery(tunnel oven), textile machinery(heat setter) and biaxial stretching machine(film tenter).
L-830 : Pale yellow High temperature region of ～270℃.For food machinery(tunnel oven), textile machinery(heat setter) and biaxial stretching machine(film tenter).

This range of straight jaw, external circlip pliers is suited for heavy duty, regular and industrial use. Constructed from resilient chrome vanadium steel, fully hardened and tempered, each product also boasts PVC cushion grip handles. Completed by a coil sprung to aid operation. Available in three sizes.

Features and Benefits
• Manufactured from industrial quality chrome vanadium steel that has been fully hardened and tempered for durability
• PVC cushion grip handles boost user comfort and control whilst using
• Coil spring action makes operating the tool easier and lessens hand fatigue
• Available in three sizes to suit your needs

Typical Applications
• Construction
• DIY
• Automotive
• Engineering

The Fluke VT Series is built with legendary Fluke toughness and quality. With a compact design and enhanced functionality, temperature measurements are visualized, so you can obtain clear and accurate infrared thermal images.