Pneumatic Tools
Kobe Blue Line IWS100X Inline Air Impact Wrench, 1in. Drive, 2305Nm Max. Torque
IWS100X - 1" square drive. Suitable for industrial and commercial production and assembly applications. Side handle for two-handed operation. Top mounted spring balance loop. Easy to use forward/reverse switch and three position power regulator. Top venting exhaust. Oiling points for daily maintenance.
Bolt Capacity: M33
Working torque: 2,030 Nm
Maximum torque: 2,300Nm
Safe working pressure: 6.2bar / 90psi.
Air inlet thread: 1/2" NPT.
Minimum air hose size (ID): 1/2" (13mm).
Air pressure: 6.3bar/90 psi.
Air consumption: 7.0 cfm.
Sound pressure level: 96 dBA.
Sound power level: 101.67 dBA.
Vibration level: 6.0 m/s².
Overall length: 448mm.
Bolt Capacity: M33
Working torque: 2,030 Nm
Maximum torque: 2,300Nm
Safe working pressure: 6.2bar / 90psi.
Air inlet thread: 1/2" NPT.
Minimum air hose size (ID): 1/2" (13mm).
Air pressure: 6.3bar/90 psi.
Air consumption: 7.0 cfm.
Sound pressure level: 96 dBA.
Sound power level: 101.67 dBA.
Vibration level: 6.0 m/s².
Overall length: 448mm.
Download
Products Lainnya
Elbow Connector
Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.
Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.
Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.
Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.
The NS4030 straight air needle scaler is a heavy duty chipping hammer perfect for industrial and production applications.
Features and Benefits
• 10 needles for quick removal of rust, paint, scale, flux and corrosion
• Compact for great accessibility for hard to reach areas
• Slimline body for one hand operation
• Front exhaust helps remove debris and scale from the work area
Typical Applications
• Ideal for surface clean-up work
• Great for rust removal on chassis
• Quick removal of rust,paint, scale, weld flux and corrosion
Features and Benefits
• 10 needles for quick removal of rust, paint, scale, flux and corrosion
• Compact for great accessibility for hard to reach areas
• Slimline body for one hand operation
• Front exhaust helps remove debris and scale from the work area
Typical Applications
• Ideal for surface clean-up work
• Great for rust removal on chassis
• Quick removal of rust,paint, scale, weld flux and corrosion
‘Y’ Piece
Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.
Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.
Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.
Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.
By choosing the ULTRA lightweight (2.2 lbs. / 1.0 Kg) and compact (4.3 in. / 108 mm length) CP7731C / CP7732C series, your daily tight applications in general maintenance can be met with ease thanks to its torque of 460 ft.lbs. / 625 Nm in reverse. The CP7731C/CP7732C series is available in 2 models: 3/8" short anvil and 1/2" short anvil.