Measuring Tools
Fluke 561 HVAC Infrared & Contact Thermometer
IR thermometer with type K thermocouple capability
Lighten up your toolbox. The Fluke 561 contact and IR thermometer combines the temperature measurement functionality needed by industrial, electrical and HVAC/R professionals, all in one tool. It also measures infrared and contact temperature, eliminating the need to use separate test equipment. Fast, efficient and easy to use, saving you valuable time and effort.
With the Fluke 561 infrared thermometer , you can also take contact and ambient temperature measurements in the way that suits you best. Use an IR thermometer to instantly measure hot, moving, electrified and hard-to-reach objects. Inspect motors, insulation, circuit breakers, radiant heat, pipes, corroded joints, and cables. Plus, scans for ducts, and other hard-to-reach objects, right from the floor. Just leave your ladder in the truck. You can use the flexible and handy Fluke 561 scanner tubing, or plug in any thermocouple probe with the industry standard mini-type K connector you already have to measure superheat or internal temperature.
Lighten up your toolbox. The Fluke 561 contact and IR thermometer combines the temperature measurement functionality needed by industrial, electrical and HVAC/R professionals, all in one tool. It also measures infrared and contact temperature, eliminating the need to use separate test equipment. Fast, efficient and easy to use, saving you valuable time and effort.
With the Fluke 561 infrared thermometer , you can also take contact and ambient temperature measurements in the way that suits you best. Use an IR thermometer to instantly measure hot, moving, electrified and hard-to-reach objects. Inspect motors, insulation, circuit breakers, radiant heat, pipes, corroded joints, and cables. Plus, scans for ducts, and other hard-to-reach objects, right from the floor. Just leave your ladder in the truck. You can use the flexible and handy Fluke 561 scanner tubing, or plug in any thermocouple probe with the industry standard mini-type K connector you already have to measure superheat or internal temperature.
Download
Produk Lainnya
- Relative time clocks at MIN, MAX and AVG provide a time reference for important events
- The Electronic Offset function enables thermocouple error compensation to maximize overall accuracy
- Measures J, K, T, and E thermocouple types
- Result reading in ºC, ºF or Kelvin (K)
- Splash and dust resistant bag with shock absorbing holster
- Front panel that is easy to set up and operate
- Sleep mode increases battery life, typical 1000 hours of battery life
- The battery cover makes it easy to replace the battery without opening the calibration seal
- The optional ToolPak accessory allows the thermometer to be hung from any metal object (with a rare earth magnet) or secured around a pipe (with a - hook-and-loop strap) for hands-free operation.
- 3 year warranty
- The Electronic Offset function enables thermocouple error compensation to maximize overall accuracy
- Measures J, K, T, and E thermocouple types
- Result reading in ºC, ºF or Kelvin (K)
- Splash and dust resistant bag with shock absorbing holster
- Front panel that is easy to set up and operate
- Sleep mode increases battery life, typical 1000 hours of battery life
- The battery cover makes it easy to replace the battery without opening the calibration seal
- The optional ToolPak accessory allows the thermometer to be hung from any metal object (with a rare earth magnet) or secured around a pipe (with a - hook-and-loop strap) for hands-free operation.
- 3 year warranty
- The Fluke 417D laser meter is accurate, durable, and easy to use—just point and shoot
- Instantly measure up to 40 m (131 ft.) with 1-button point-and-click
- Continuous measurement capable: adjusting as you move closer and farther from your target
- Quickly calculate area (sq feet/meters)
- 1-meter drop tested and IP54 rated: built to withstand rainy or dusty conditions
- Great for interior and exterior applications
- Instantly measure up to 40 m (131 ft.) with 1-button point-and-click
- Continuous measurement capable: adjusting as you move closer and farther from your target
- Quickly calculate area (sq feet/meters)
- 1-meter drop tested and IP54 rated: built to withstand rainy or dusty conditions
- Great for interior and exterior applications
The Fluke 1630 is a MUST HAVE for those who are intent on improving the reliability of their systems and making it impervious to impulse damage. The Fluke 1630 is easy to use, highly accurate and an industry standard”- verified purchaser
The 1630-2 FC clamp measures earth ground loop resistances for multi-grounded systems using the dual-clamp jaw. This test technique eliminates the dangerous and time-consuming activity of disconnecting parallel grounds, as well as the process of finding suitable locations for auxiliary test stakes. You can also perform ground tests in places that were previously difficult: inside buildings, on power pylons or anywhere you don't have access to soil to place auxiliary test stakes.
Earth ground ac leakage current measurement
- Identify ac leakage currents without disconnecting the earth ground stake from the grounding system–ideal for system troubleshooting.
- Rugged heavy-duty clamp jaw stays in alignment and in calibration even in every day, on-the-job industrial environments.
Logging measurements
- The earth ground clamp saves time by automatically recording data at pre-set intervals
- Saves up to 32,760 measurements in memory at the set logging interval.
- Saves time by recording and storing measured values.
Alarm threshold
- User-defined high/low alarm limits, for rapid measurement evaluation.
Band-pass filter
- Selectable band-pass filter function removes unwanted noise from the ac leakage current measurement.
Fluke Connect® Wireless System
- The 1630-2 FC supports the Fluke Connect Wireless System connects the clamp with an app on your smartphone or tablet (may - not be available in all regions).
- You can save these measurements, and images to Fluke Connect Cloud storage and share with your team.
- Maximize uptime and make confident maintenance decisions with data you can trust and trace.
- Access baseline, historical and current measurements by asset.
- Share your measurement data using ShareLive™ video calls and emails.
- The 1630-2 FC is part of a growing system of connected test tools and equipment maintenance software. Visit the website to learn more about the Fluke Connect system.
The 1630-2 FC clamp measures earth ground loop resistances for multi-grounded systems using the dual-clamp jaw. This test technique eliminates the dangerous and time-consuming activity of disconnecting parallel grounds, as well as the process of finding suitable locations for auxiliary test stakes. You can also perform ground tests in places that were previously difficult: inside buildings, on power pylons or anywhere you don't have access to soil to place auxiliary test stakes.
Earth ground ac leakage current measurement
- Identify ac leakage currents without disconnecting the earth ground stake from the grounding system–ideal for system troubleshooting.
- Rugged heavy-duty clamp jaw stays in alignment and in calibration even in every day, on-the-job industrial environments.
Logging measurements
- The earth ground clamp saves time by automatically recording data at pre-set intervals
- Saves up to 32,760 measurements in memory at the set logging interval.
- Saves time by recording and storing measured values.
Alarm threshold
- User-defined high/low alarm limits, for rapid measurement evaluation.
Band-pass filter
- Selectable band-pass filter function removes unwanted noise from the ac leakage current measurement.
Fluke Connect® Wireless System
- The 1630-2 FC supports the Fluke Connect Wireless System connects the clamp with an app on your smartphone or tablet (may - not be available in all regions).
- You can save these measurements, and images to Fluke Connect Cloud storage and share with your team.
- Maximize uptime and make confident maintenance decisions with data you can trust and trace.
- Access baseline, historical and current measurements by asset.
- Share your measurement data using ShareLive™ video calls and emails.
- The 1630-2 FC is part of a growing system of connected test tools and equipment maintenance software. Visit the website to learn more about the Fluke Connect system.
Now there is one intrinsically safe digital multimeter (DMM) you can use in IIC (gas), in Zones 1 and 2, and IIIC (dust), Zones 21 and 22. Whether you work in an oil, chemical, or pharmaceutical environment , all the test and troubleshooting capabilities you need are in the most robust and intrinsically secure (IS) Fluke DMM ever made. The Fluke 28 II Ex is also water, dust and drop resistant. You will be equipped to solve all problems, inside and outside the danger zone, without compromising on compliance or measurement performance.