Produk

M18 FSAGV100XPDB-0X0
• Generates Corded Power - Powerful POWERSTATE™ Brushless Motor spins at 8,500 RPM and allows the user to complete the toughest grinding and cutting applications
• Increased Control - Variable speed control for applications that require lower RPM grinding; 3500 - 8500 RPM
• 5 Speed Settings

Suitable for lubricants, diesel and non-corrosive liquids, this lever pump is constructed from a zinc chrome finish steel and is completed with a telescopic suction tube. Suitable for container sizes 60 and 205 litres, the innlet on the pump is 2" BSP and M59 x 5 male thread.





Features and Benefits


• Manufactured from steel for durability


• Zinc chrome finish protects against corrosion and wear and tear


• Can be used with both 60 and 205 litre containers making it a versatile product


• Is compatible with non-corrosive liquids and most lubricants


• Telescopic suction tube allows you to adjust the tube to suit your desired container





Typical Applications


• Automotive


• Engineering

M18 SAL-0
• Three light output modes for optimal brightness and runtime
• High Mode: 2,000 lumens for up to 4 hours with M18™ XC 5.0 Pack
• Medium Mode: 1,300 lumens for up to 6 hours with M18™ XC 5.0 Pack

48-22-8300
• Part of the PACKOUT™ modular storage system
• Impact resistant polymer base protects contents from water, abrasion and impact
• Made from 1680D Ballistic Material for jobsite durability

The Kennedy range of line markers are the perfect marking solution ideal for use on car parks, factory/ warehouse floors, playgrounds, sports fields, tennis courts, leisure centres and road surfaces. Its Aerosol delivered formula is suitable for use with stencils or free hand marking.

CFC-free and containing no lead additives, it is safe and convenient to use, capable of marking between 60-100 metres of a 50mm line when used in a standard machine. It is also compatible with most major brand applicators.

Features and Benefits
• Can be used on a variety of surfaces allowing lines to be made in various locations
• One line marker will give between 60-100 metres of a 50mm line when used in a standard machine

• Fully compatible with major brand applicators
• CFC-free formula and no lead additives
• Suitable for stencils, line or free hand marking
• Ideal for use on car parks, factory floors, playgrounds, sports fields, tennis courts and road surfaces
• Available in a range of colours

Typical Applications
• Road Marking
• Leisure Indusrty
• Industrial Floors
Warning
• Flammable- Aerosol

230 x 280mm (9"x11") Sheets.
Aggressive, fast-cutting waterproof silicon carbide paper, perfect for use on paints, lacquers and fillers. Paper backed, A/C weight.


Features and Benefits
• Fast-cutting waterproof abrasive sheet, ideal for fine sanding applications
• Provides a high quality, consistent surface finish
• Sharp abrasive silicon carbide mineral ensures long product life and excellent surface quality
• Flexible and conformable water resistant paper backing for easier handling

Key features
• Highly accurate, easy-to-use thermocouple temperature calibrator
• Measures and simulates 17 thermocouple types and millivolts
• Measures 4 to 20 mA signals while sourcing a temperature signal
• Comes with a magnetic hanger for convenient hands-free operation
• Features configurable source settings for quick linearity checks

Locating leaks often proves to be very demanding due to locations that are difficult to access. This is where the Dräger GS3 leakage detector comes in: as it is no larger than a ballpoint pen, even hard-to-reach places are no problem. The detector for flammable gases such as natural gas, liquefied petroleum gas and hydrogen detects even the smallest of leaks, indicated by a visual and acoustic alarm signal.

The Matlock® range of Solid Brass Padlocks is designed to provide minimum to medium-security for indoor and outdoor use on garages, cabinets, toolboxes, gates, truck doors, lockers, sheds, and bicycles.

Features and Benefits
• Hardened steel shackle for security
• Suitable for use both indoor and outdoor
• Available in 3 or 4 digit combinations

Manufactured from M35 HSS and used for the deburring and chamfering of most metals and plastics. Features straight shanks and manufactured to BS 328 : Part 5 : 1983.

• Single hole head with nclusive angle of 90° for excellent cutting performance
• Manufactured from M35 HSS for increased toughness
• Uncoated with good heat and wear resistance

Typical Applications
•Countersinking

Standards
• Manufactured to BS 328 : Part 5 : 1983

M18 FSAG100X-0X0
• Generates Corded Power - Powerful POWERSTATE™ Brushless Motor spins at 8,500 RPM and Allows the User to Complete the Toughest Grinding and Cutting Applications
• Fastest Cutting - Increased Productivity
• Up to 135 Cuts in Rebar

Work in any heavy -duty environment with the CP67XX series of impact wrenches from 3/8" to 1, including Atex certified-IP6 dust-proof models. Designed with a powerful and durable oil bath twin hammer clutch mechanism, steel housing, and a lightweight composite body, the CP67XX delivers a maximum reverse torque from 475 up to 1750 Nm (350 up to 1290 ft.lb us). The CP67XX series is available in ATEX and non ATEX for CP6728 and 38 with ring or ring-dual socket retainer.