Produk

• Menghilangkan oli, gemuk, kotoran, dan residu pada permukaan logam
• Membersihkan tanpaharus membongkar unit
• Aman digunakan pada kampas rem,besikampas rem, dan tromol rem
• Formula tidak terklorinasi
• Dapat digunakan sebagai pembersih permukaan sebelum proses coating

M18 SAL-0
• Three light output modes for optimal brightness and runtime
• High Mode: 2,000 lumens for up to 4 hours with M18™ XC 5.0 Pack
• Medium Mode: 1,300 lumens for up to 6 hours with M18™ XC 5.0 Pack

Counterbores N with a diameter of 50mm and larger are all made with a driving lip. These sizes should be used in the appropriate type M toolholder.

Dimensions (mm) N, NA & W
Counterbores N, and NA with Ø of 50 mm and larger are all made with a driving lip. These sizes should be used in the appropriate type M toolholder
d: 14.0; d1: 6.0; L: 48.0; L1: 28.0.

The CP721 Series 3/8" impact wrench offers a rocking dog mechanism and a metal motor housing for high durability and smooth operation. High productivity is ensured with a torque of 75 ft.lbs / 102 Nm while also being compact and comfortable to use.

RP250

Used for dispensing lubricants and disel, this cast iron pump with a steel suction tube and spout is the easy way to control the flow of said liquids. Suitable for container size of 200 litres, the pump possesses an inlet of 2" BSP and M59 x 5 male thread.

Features and Benefits
• Cast iron pump with steel suction tube and spout making for a hardy product
• Suited for use on a 200 lite capacity barrel
• With a 980mm tube to easily dispense liquids when necessary

Typical Applications
• Suited for controlling the flow of fluids in a 200 litre barrel

The CP772 Series is the "Classic" 3/4" impact wrench, designed with a pin clutch mechanism in oil bath and a metal motor housing for high durability.

M18 PAL-0
• 1500 Lumens of TRUEVIEW™ High Definition Output
• Powerful Magnetic base
• 2" Spring Loaded Clamp

This 3/8" and 1/2" impact wrench series, designed with a pin clutch mechanism in oil bath and a metal motor housing for high durability is highly recommended. High productivity in loosening and tightening nuts, while also being both compact and comfortable. The CP724/CP726 Series consists of 2 sizes : 3/8" short anvil and 1/2" short anvil.

Supplied in a moulded plastic carry case, this set of 4 circlip pliers is the ideal product for the removal and insertion of circlips. Manufactured from specially selected steels combined with a dual material grip handle design allows the user to apply the greatest force with the minimum amount of effort. Finished with a double polished head, joint and an induction hardened cutting edge. Features pliers for both external and internal circlips.

Features and Benefits
• Supplied in a plastic moulded carry case for ease of storage, organisation and transportation of your tools
• 4 piece set ensures you always have the correct set of circlip pliers no matter the application
• Handles have a polypropylene core for strength and durability with a soft thermoplastic outer for non-slip comfort grip
• Pliers are manufactured from specially selected steels designed for strength
• Double polished head and joint to repel dirt
• Induction-hardened cutting edges that hold over time even with frequent use

Contents
• External straight jaw, 10 - 25mm and 19 - 40mm
• Internal straight jaw, 10 - 25mm and 12 - 65mm

Typical Applications
• Used to remove and insert both external and internal circlips which are commonly used in the automotive industry as well as being suitable for production line environments where repetitive work is undertaken

The "Classic" reference in the 1/2" impact wrench range, designed with a pin clutch mechanism in oil bath and a metal motor housing for high durability.

When it comes to portable welders, the ESAB Rebel EMP 235ic is packed with the power to weld up to a half-inch on mild steel, measuring in at 235A at 20%. You have the ability to weld a wide range of metal thicknesses and applications, including the full range of 0.9 in both short arc and spray arc transfer, up to 1.0 solid wires, and up to 1.2 cored wires. Plus, ESAB Rebel EMP 235ic can also weld Stick rods up to 4mm and TIG rods up to 4.8mm.

Whether you have been welding for two years or 20, ESAB Rebel 235ic can make your job easier with sMIG (smartMIG). For the novice, there is basic mode, which makes setup simple. For the experienced, the exclusive, built-in arc control that constantly monitors your weld and adapts for superior, repeatable welds.

You’re on-site, out in the field, and in the shop. You need a machine that can go where you go and withstand the harsh environments you face. Rebel can. With a sturdy multi-handle roll cage, steel unibody construction, and IP23S-level protection, Rebel’s rugged exterior gives you the confidence to go where you need to go without fear.
The Rebel is a true Multi-Process inverter with professional-grade MIG performance, including flux-cored, Excellent MMA performance, including stainless steel, 6010 and 6011 cellulosic and 308L electrodes
• Exceptional lift TIG performance down to 5A

CP749 Series 1/2" impact wrench belongs to our Classic range. With its patented clutch mechanism in oil bath and metal motor housing, it is renowned for its durability. Efficient loosening and tightening of nuts is ensured with a torque of 610 ft.lbs / 827 Nm. The CP749 Series consists of 2 models: 1/2" short anvil and 1/2" long anvil.