Produk

M18 FN18GS-0X0
• Best-in-class power to consistently seat nails sub-flush to the surface in hardwoods
• Ready to Fire Nail Technology eliminates ramp-up time between each nail discharge
• No gas cartridges and no cleaning required, designed to deliver durability and reliability to the most demanding users with very little maintenance

Gembok LOTO, Dielectric Zenex? Thermoplastic Safety. Lebar Body 1-1/2in (38mm) dengan Nylon Shackle 1-1/2in (38mm)

Fitur Produk:
• 406 adalah Gembok Pengaman Termoplastik Dielektrik
• Shackle plastic-nya membantu mencegah sengatan listrik dan juga mencegah arus listrik dari Shackle ke kunci
• Semua komponen tidak memicu percikan dan non-magnetis – plastik, tembaga, kuningan
• Didesain khusus untuk aplikasi penandaan penguncian
• Bodi kunci termoplastik yang tahan lama, ringan, dan tidak konduktif
• Kepatuhan dengan arahan “One Employee, One Lock, One Key”
• Penahan kunci – memastikan bahwa gembok tidak dibiarkan terbuka
• Kunci berbeda-beda, tumbler 6-pin dengan lebih dari 40.000 silinder penggantian kunci yang tersedia
• Lebar 1-1/2in (38mm), tinggi 1-3/4in (45mm), Bodi Biru termoplastik, Shackle plastik dengan jarak bebas 1-1/2in (38mm)
• Paket Komersial, Paket Rak Qty 6, Master Carton Qty 36

The Dräger Alcotest® 7000 sets new standards in alcohol test devices. Its benefits include a wider temperature- and measuring range, low maintenance requirements and various networking options. In addition, the device can perform alcohol tests via both a mouthpiece and a funnel. Reliable alcohol tests have never been so fast, simple and efficient.

Industrial 90° air angle die grinder - This versatile air grinder is suitable for use with a wide range of abrasive stones and spiral bands. With a compact design it is well suited to working in confined spaces

Features and Benefits
• Precision geared or longer life and smoother running
• Safety lever throttle prevents accidental start-ups
• Ideal for tight access applications
• Rear exhaust directs away from the workpiece
• Supplied with two collet spanners and a comprehensive instruction manual

Typical Applications
• For use on grinding, polishing, buffing and deburring
• Ideal for cleaning, Smoothing welds seams and castings
• Maintenance applications

Notes
• Always ensure that the speed of the air tool never exceeds the maximum operating speed of the consumable
• Recommended Consumables - Tungsten Carbide Burrs, Mounted Points, Flap Wheels and Abrasive Bands

Cutting fluids are used when metals or similar materials are cut and made into finished products by machine tools such as lathes, machining centers, and grinding machines. MORESCO is developing cutting fluids that have long service lives, which reduces the amount of waste fluid that is generated and thereby contributes to environmental improvements.

Toolmate Waterbase
BS-33 (Biostatic Types) : Machining of aluminum and steel.
GR-2 (Biostatic Types) : Precision grinding, Efficient grinding of steel, and special metals.

Toolmate Oilbase
NN Series : Inactive oil-based cutting oil. There is no discoloration such as copper · brass etc. We have variety types from low to high viscosity.
NA Series : Active type of oil-based cutting oil. It has great processability for iron based workpieces. We have variety types from low to high viscosity.

A quick and easy solution to contain spills. Contains spills in the bund.
Heavy duty rotational moulded IBC spill pallets for single or double IBC storage applications. 100% polyethylene construction, corrosion resistant and with removable decking to assist cleaning they are suitable for most IBC footprints. Forklift pockets for ease of positioning and moving empty units. Please check the technical data sheet below to learn the weight capacity for each product.

Features and Benefits
-Made from polyethylene
-Fitted with grids
-It has base fork pockets
-Reusable
-Corrosion Resistant
-Grids to help with the upstand support
-Fork pockets which allow easy access when unloading/loading or moving the item.
-Compact, lightweight and strong

Notes
• Drums not included

3M 361F
Tough resin-bonded aluminium oxide disc, for grinding and stock removal. Perfect for applications such as weld grinding and finishing.

Features and Benefits
• 3M Roloc attachment enables efficient yet secure installation and removal of the disc
• Class-leading highly-durable aluminum oxide abrasive grains cut fast and perform well on many surfaces
• Tough YF-weight, polyester backing supports medium-pressure applications and provides consistent performance
• Heat-resistant resin coating bonds abrasive to backing for extreme durability under pressure, heat, and water

Notes
• Maximum rpm:
25mm discs = 25000rpm
38, 50 and 75mm discs = 20000rpm

A professional air angle grinder offering a high standard and superb value combined with the design elements of a modern industrial classic. This powerful and versatile air grinder is suitable for use with a wide range of sanding and grinding applications. With a compact design it is well suited to working in confined spaces.

Features and Benefits
• Lightweight and compact
• Front exhaust for user comfort and clearance of dust
• Fully adjustable safety guard that locks in to position

Typical Applications
• For use on grinding, polishing, buffing and deburring
• Ideal for cleaning, Smoothing welds seams and castings
• Maintenance applications

Notes
• Always ensure that the speed of the air tool never exceeds the maximum operating speed of the consumable

Type of Luminaire : Standard Floodlight (Pro) A Series
Set Model No : NYS12347LD2031
Type of Light Source : LED
Power Input : 264W
System Lumen Output : 41000 lm
Power Voltage : 200-242V
Lifetime : 40000H(L70)
CCT : 5000K
CRI : 70
Input Frequency : 50/60Hz
Dimming : non-Dimmable
Glare Cut Angle : 60deg.
Beam Angle : 54deg.
IP Rating : 75deg.
Ambient Temperature : -20 - 35°C
Dimensions : 422mmx534mmx340mm
Body : ADC

The J100 Series are general purpose HSS straight shank drills with a black oxide finish. Ideal for applications involving steel (including cast steel) cast iron (including malleable cast iron) as well as nickel, brass aluminium alloys and graphite. Their 118° point allows for precise hole alignment and reliable cutting performance whilst the black oxide coating helps reduce heat by retaining coolant on the tool surface. The coating also helps reduce the risk of the tool staining.

Features and Benefits
• High speed steel construction for increased tool durability
• Point angle of 118° for precise holemaking and precision cutting
• Black oxide coating helps aid chip flow, reduce heat and prevent staining
• Ideal for applications involving steel, iron, nickel, brass, aluminium alloy and graphite

Typical Applications
• Cutting and drilling
• Ferrous materials
• Steel
• Iron
• Nickel
• Brass
• Aluminium alloy
• Graphite

Notes
• Available in sizes 0.25mm -20.00mm

Standards
• Manufactured to BS 328/DIN338RN

Bring out the best for work.



The Ti580 is a rugged and superbly built 640 x 480 thermal image camera. Now users can perform thermal image checks more confidently and faster than ever before - all thanks to the ruggedness and ease of use that Fluke has come to expect.



See sharper and clearer images for more accurate interpretation.



A screen that can rotate 240 degrees makes it easier to take pictures when the equipment is in an area that is difficult or not easy to reach. The ergonomic design and neck strap make long inspection days easier. Outdoors, the swivel display lets you adjust it to minimize glare, and the Fluke 5.7" touchscreen LCD offers premium viewing in the field - truly "built for a purpose."



Includes new, powerful and easy-to-use Fluke Connect® SmartView® desktop software.



The Fluke Connect SmartView desktop software is a comprehensive and connected software platform that represents the future of integrated equipment maintenance, monitoring, analysis and reporting now available. It's easier than ever to optimize thermal analysis, generate fast, customizable and powerful reports and export images to your preferred format in the cloud. And you'll be able to integrate it with Fluke Connect – the world's largest system of integrated maintenance tools and software.

Gembok LOTO, Teal Zenex? Thermoplastic Safety. Lebar Body 1-1/2in (38mm) dengan tinggi Shackle 1-1/2in (38mm)

Fitur Produk:
• 410 adalah Gembok Pengaman Termoplastik
• Didesain khusus untuk aplikasi lockout tagout (LOTO)
• Bodi kunci termoplastik yang tahan lama, ringan, dan tidak konduktif
• Kepatuhan dengan arahan “One Employee, One Lock, One Key”
• Silinder keamanan tinggi, disediakan untuk keselamatan
• Penahan kunci – memastikan gembok tidak dibiarkan terbuka
• Kunci berbeda-beda, tumbler 6-pin dengan lebih dari 40.000 silinder penggantian kunci yang tersedia
• Lebar 1-1/2in (38mm), tinggi 1-3/4in (45mm), Bodi Merah termoplastik, Shackle plastik dengan jarak bebas 1-1/2in (38mm)
• Paket Komersial, Paket Rak Qty 6, Master Carton Qty 36