Tools & Chemicals
Kennedy Manual Aviation Snips, Cut Straight, Blade Chrome Vanadium
These aviation snips have the ability to cuts straight, left or right. Possessing a self-opening action for fast, effortless feed, with a built-in convenient, protective safety latch. Manufactured from drop forged chrome vanadium ground steel with a hardness of 54 - 58HRc. The double fulcrum compound action amplifies the pressure applied for easier cutting of up to 1.2mm cold rolled steel sheet. Completed by anti-slip guards, thumb lock and a spring loaded self-opening action for one handed operation.
Features and Benefits
• Anti slip guards for extra protection from slippage
• Thumb lock to secure the jaws when not in use
• Drop forged chrome vanadium steel blades to hold a good cutting edge even over time
• Spring loaded, self opening action to allow for effortless feed and single handed operation
• Double fulcrum allows for easier cutting of even 1.2mm steel
Typical Applications
• For use on mild steels and other non-ferrous materials
Features and Benefits
• Anti slip guards for extra protection from slippage
• Thumb lock to secure the jaws when not in use
• Drop forged chrome vanadium steel blades to hold a good cutting edge even over time
• Spring loaded, self opening action to allow for effortless feed and single handed operation
• Double fulcrum allows for easier cutting of even 1.2mm steel
Typical Applications
• For use on mild steels and other non-ferrous materials
Download
Products Lainnya
Boasting tapered jaws with a smooth jaw adjustment, this range of adjustable spanners is ideal for versatile and regular use. Manufactured from drop forged chrome vanadium steel with a chrome finish, each adjustable spanner also features a graduated laser etched jaw for fast jaw setting. Available in varying lengths to suit your preferences.
Features and Benefits
• Tapered jaws allow for access in confined and restricted spaces
• Available in varying sizes to allow you to select the size best suited for your needs
• Laser etched scale on the jaw for fast and accurate setting
• Manufactured from drop forged steel for ultimate durability and strength
• Chrome polished finish repels dirt and makes cleaning easier
Typical Applications
• DIY
• Construction
• Plumbing
• Engineering
Notes
• Also available in a 2 piece (6"/150mm & 10"/250mm) set, please see SEN5014750K
Features and Benefits
• Tapered jaws allow for access in confined and restricted spaces
• Available in varying sizes to allow you to select the size best suited for your needs
• Laser etched scale on the jaw for fast and accurate setting
• Manufactured from drop forged steel for ultimate durability and strength
• Chrome polished finish repels dirt and makes cleaning easier
Typical Applications
• DIY
• Construction
• Plumbing
• Engineering
Notes
• Also available in a 2 piece (6"/150mm & 10"/250mm) set, please see SEN5014750K
This range of industrial roller cabinets feature a modern design that's sturdy, stylish and secure. This range has been made with the heavy industrial user in mind. It features full width top chests and full height cabinets with alloy style castors. Made from robust steel with inner walls and reinforced back panels, all units are finished with anti-rust and solvent resistant powder coat paint. All corners are angled to maintain product shape and offer cabinet protection during repositioning. This range features fully opening drawers with classic design pulls to allow easy access.
Features and Benefits
• Anti-rust and solvent resistant powder coat finish protects against incidental damage
• Perforated sides optimise space with easy to install accessories
• Steel inner walls for added strength and extra rigidity
• Non-slip EVA top mat and liners prevent damage and protect tools
• Fully opening drawers with magnets to secure them in place
• 45mm Ball bearing slides give good drawer stability and smooth action even under load
• Greater security due to the locking system with cylinder locks
• Increased mobility thanks to the strong ergonomic side handle, which can fit to either side of the unit to facilitate easy repositioning
• 125mm diameter castors with lockable brakes absorb shock and can support heavy loads
• Enhanced safety via the spring loaded catches prevent drawers opening when repositioning
• Available in varying sizes to suit your requirements
Typical Applications
• Workshops
• Garages
• Industrial
Features and Benefits
• Anti-rust and solvent resistant powder coat finish protects against incidental damage
• Perforated sides optimise space with easy to install accessories
• Steel inner walls for added strength and extra rigidity
• Non-slip EVA top mat and liners prevent damage and protect tools
• Fully opening drawers with magnets to secure them in place
• 45mm Ball bearing slides give good drawer stability and smooth action even under load
• Greater security due to the locking system with cylinder locks
• Increased mobility thanks to the strong ergonomic side handle, which can fit to either side of the unit to facilitate easy repositioning
• 125mm diameter castors with lockable brakes absorb shock and can support heavy loads
• Enhanced safety via the spring loaded catches prevent drawers opening when repositioning
• Available in varying sizes to suit your requirements
Typical Applications
• Workshops
• Garages
• Industrial
Available to purchase in an array of sizes, these metric, 1/2in. drive impact sockets are made from chrome molybdenum alloy steel with a black oxidised finish. Each socket is permanently laser etched, making it easy to identify for a quicker selection. Used for turning nuts onto bolts, impact sockets are an essential part of a toolkit for an array of industries.
Features and Benefits
• Each socket is clearly marked with permanent, laser etched sizings to ensure quick and easy identification and selection of the correct component
• Manufactured from chrome molybdenum steel for durability and high performance even with extensive use
• Available in a range of sizes to suit your varying applications
• Black oxidised finish provides further protection against corrosion and wear and tear
Typical Applications
• Plumbing
• DIY
• Construction
• Engineering
• Automotive
Features and Benefits
• Each socket is clearly marked with permanent, laser etched sizings to ensure quick and easy identification and selection of the correct component
• Manufactured from chrome molybdenum steel for durability and high performance even with extensive use
• Available in a range of sizes to suit your varying applications
• Black oxidised finish provides further protection against corrosion and wear and tear
Typical Applications
• Plumbing
• DIY
• Construction
• Engineering
• Automotive
Offering a solution to finishing problems where material hardness makes conventional files ineffective, this 6 piece file set has a diamond powder coated finish. Each file can be used on tungsten carbide, ceramics, carbon, glass, fibreglass and hardened steels such as stainless steel, nimonics and titanium for excellent versatility.The product is plated with finely selected diamond powder 120/140 grain and is supplied in a PVC wallet.
Features and Benefits
• Supplied in a PVC wallet to keep your tools secure and protected
• Finely selected diamond powder coating makes for extremely precise results when filing
• Can be used on a wide range of materials including tungsten carbide, ceramics, glass, hardened steels and carbon for versatility of use
• 6 piece set ensures you have the right shape and size file for your needs
• Non-slip grip handle bolsters user control and comfort
Contents
• 1 x Hand File
• 1 x Half Round File
• 1 x Three Square File
• 1 x Round File
• 1 x Square File
• 1 x Knife File
Typical Applications
• Construction
• Metal Worksing
• Automotive
Features and Benefits
• Supplied in a PVC wallet to keep your tools secure and protected
• Finely selected diamond powder coating makes for extremely precise results when filing
• Can be used on a wide range of materials including tungsten carbide, ceramics, glass, hardened steels and carbon for versatility of use
• 6 piece set ensures you have the right shape and size file for your needs
• Non-slip grip handle bolsters user control and comfort
Contents
• 1 x Hand File
• 1 x Half Round File
• 1 x Three Square File
• 1 x Round File
• 1 x Square File
• 1 x Knife File
Typical Applications
• Construction
• Metal Worksing
• Automotive