Measuring Tools
Fluke VT06 Visual IR Thermometer
Fluke VT series is built with legendary Fluke ruggedness and quality. With compact design and upgraded function, the temperature measurement is visualized, so that you can obtain a clear and accurate infrared thermal image.
Download
Products Lainnya
The FLUKE 125B/INT is a 120B series ScopeMeter hand held oscilloscope with 40MHz bandwidth, 2 analogue channels and universal plug type. It is a rugged solution for industrial electrical and electro mechanical equipment troubleshooting and maintenance applications. This is a truly integrated test tool with oscilloscope, multimeter and high speed recorder in one easy to use instrument. It also integrates with Fluke Connect mobile app and FlukeView for ScopeMeter software to enable further collaboration, data analysis and archiving of critical test information. The 125B includes innovative functions designed to help technicians troubleshoot faster and it has rugged design to withstand 3g vibration and 30g shock. IntellaSet technology automatically and intelligently adjusts numerical readout based on measured signal. The oscilloscope is IP51 rated according to EN/IEC60529. It has 5.7inch colour active matrix TFT display (640 x 480 pixels) and qualified by 600V CAT IV, CE, CSA.
- Rise time of less than 8.75ns and input impedance of 1Mohm/20pF (without probes and test leads)
- Maximum sample rate of 400KSPS, optically isolated USB interface
- Meter and scope recorder, full function dual input scope and meter, scope cursor measurements
- Simplified testing, more insight and faster electromechanical troubleshooting
- Dual input digital oscilloscope and two 5000 count true RMS digital multimeters
- Bus health and power and harmonics measurements
- Recorder event detect captures elusive intermittent signals on repetitive waveforms up to 4KHz
- Voltage, current and power harmonics, power measurements (W, VA, VAR, PF, DPF, Hz)
- Dimension is 259mm x 132mm x 55mm (10.2inch x 5.2inch x 2.15inch) and weight is 1.4Kg
- Operating temperature range from 0°C to 40°C (battery operation) & 0°C to 50°C (power adapter)
Applications
Test & Measurement
Contents
Fluke 125B hand held oscilloscope, Shielded test leads with black ground leads, Black test lead (for grounding), Hook clips (red, blue), Banana to BNC adapters (black, x1), 10:1 voltage probe, i400s AC current clamp, USB angled adapter, Wi-Fi USB adapter, Switch mode power supply, Adapter/battery charger, Rechargeable Li-ion battery pack.
Footnotes
In addition, we have calibration services for this product. Choose from a Standard Certificated Service or an internationally recognised UKAS accredited calibration. Visit our calibration service page for more details.
- Rise time of less than 8.75ns and input impedance of 1Mohm/20pF (without probes and test leads)
- Maximum sample rate of 400KSPS, optically isolated USB interface
- Meter and scope recorder, full function dual input scope and meter, scope cursor measurements
- Simplified testing, more insight and faster electromechanical troubleshooting
- Dual input digital oscilloscope and two 5000 count true RMS digital multimeters
- Bus health and power and harmonics measurements
- Recorder event detect captures elusive intermittent signals on repetitive waveforms up to 4KHz
- Voltage, current and power harmonics, power measurements (W, VA, VAR, PF, DPF, Hz)
- Dimension is 259mm x 132mm x 55mm (10.2inch x 5.2inch x 2.15inch) and weight is 1.4Kg
- Operating temperature range from 0°C to 40°C (battery operation) & 0°C to 50°C (power adapter)
Applications
Test & Measurement
Contents
Fluke 125B hand held oscilloscope, Shielded test leads with black ground leads, Black test lead (for grounding), Hook clips (red, blue), Banana to BNC adapters (black, x1), 10:1 voltage probe, i400s AC current clamp, USB angled adapter, Wi-Fi USB adapter, Switch mode power supply, Adapter/battery charger, Rechargeable Li-ion battery pack.
Footnotes
In addition, we have calibration services for this product. Choose from a Standard Certificated Service or an internationally recognised UKAS accredited calibration. Visit our calibration service page for more details.
Process calibration designed specifically for process industries
The Fluke 726 is a precise and powerful, yet easy-to-use, field calibrator. It features broad workload coverage, calibration power, and unsurpassed accuracy needed by process professionals. It measures and sources almost all process parameters to calibrate almost anything. Use it to test sensors and valves, and to test and calibrate transmitters. The 726 interprets results without the help of a calculator and stores measurement data for later analysis.
Measurement capabilities
This precision multifunction calibrator measures volts, mA, pressure, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters. The 726 also sources and simulates volts, mA, thermocouples, RTDs, frequency to calibrate transmitters. Measures and/or sources pressure using when paired with any of the 50 Fluke 750P series Pressure Modules to test and calibrate pressure transmitters and other devices. The 726 can also:
- Source mA with simultaneous pressure measurement to conduct valve and I/P test
- Conduct enhanced flowmeter testing with frequency totalizer and frequency pulse train source mode
Designed for ease of use
The 726 has built-in features that make it easier to use in nearly any measurement situation. From its ability to store frequently used test setups, to programming custom RTD probe calibration constants for enhanced temperature measurement, or the integrated voltage input protection design that improves reliability, the 726 is built to perform. The use of two separate channels even allows you to measure, source, or view process signals simultaneously. The backlit display provides better visibility in low-light conditions, and the standard 3-year warranty provides extra confidence that the 726 will be there when you need it to be.
You can also use the 726 to:
- Capture the set, reset, and deadband of a pressure switch with the integrated switch test
- Calculate the transmitter error % to interpret calibration results without the use of a calculator
- Perform fast linearity tests with the auto-step and auto-ramp features
- Power a transmitter during test using 24 V loop supply and simultaneous mA measurement
The Fluke 726 is a precise and powerful, yet easy-to-use, field calibrator. It features broad workload coverage, calibration power, and unsurpassed accuracy needed by process professionals. It measures and sources almost all process parameters to calibrate almost anything. Use it to test sensors and valves, and to test and calibrate transmitters. The 726 interprets results without the help of a calculator and stores measurement data for later analysis.
Measurement capabilities
This precision multifunction calibrator measures volts, mA, pressure, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters. The 726 also sources and simulates volts, mA, thermocouples, RTDs, frequency to calibrate transmitters. Measures and/or sources pressure using when paired with any of the 50 Fluke 750P series Pressure Modules to test and calibrate pressure transmitters and other devices. The 726 can also:
- Source mA with simultaneous pressure measurement to conduct valve and I/P test
- Conduct enhanced flowmeter testing with frequency totalizer and frequency pulse train source mode
Designed for ease of use
The 726 has built-in features that make it easier to use in nearly any measurement situation. From its ability to store frequently used test setups, to programming custom RTD probe calibration constants for enhanced temperature measurement, or the integrated voltage input protection design that improves reliability, the 726 is built to perform. The use of two separate channels even allows you to measure, source, or view process signals simultaneously. The backlit display provides better visibility in low-light conditions, and the standard 3-year warranty provides extra confidence that the 726 will be there when you need it to be.
You can also use the 726 to:
- Capture the set, reset, and deadband of a pressure switch with the integrated switch test
- Calculate the transmitter error % to interpret calibration results without the use of a calculator
- Perform fast linearity tests with the auto-step and auto-ramp features
- Power a transmitter during test using 24 V loop supply and simultaneous mA measurement
The Fluke 3130-G2M Portable Pressure Calibrator is designed for professionals who demand speed, accuracy, and convenience in pressure calibration. Combining robust pressure generation, high-precision measurement, electrical testing, and exceptional portability, the 3130-G2M delivers a complete solution for field and lab calibration tasks.
Key Features and Benefits
• Integrated Motorized Pump – Say goodbye to manual hand pumps. The powerful, internal motorized pump delivers fast, effortless pressure generation and control, saving time and eliminating operator fatigue.
• Supports Large Volume Applications – Easily connect to an external gas supply, such as plant air, for quick pressurization of large systems. Fine-tune pressure precisely with the built-in variable volume.
• High-Accuracy Pressure Measurement – The onboard sensor provides reliable measurements up to 2 MPa (300 psi, 20 bar) with outstanding accuracy of ±0.025% of reading + 0.01% FS—including all major sources of error.
• Flexible Measurement Range – Expand your capability by connecting Fluke 700P pressure modules, ensuring precision across a wider range of pressures for any application.
• Comprehensive Electrical Measurement – Calibrate pressure transducers and transmitters with built-in support for 4–20 mA and 0–30 V DC measurements. The 3130-G2M can also supply 24 V DC power and source 4–20 mA current, streamlining transmitter testing.
• Rugged, Portable Design – Built tough for the field, the 3130-G2M features a ruggedized case with internal storage for leads, fittings, and power supply. A rechargeable NiMH battery delivers up to 50 hours of operation, or 100 calibrations to 300 psi per charge.
• Simple Battery Recharge – Just plug in with the included universal mains adapter—no special chargers required.
• Seamless Automation and Data Logging – Easily connect to your PC using the Fluke Calibration 700SC Serial Interface Cable and control your calibrator or log data using Fluke Calibration COMPASS for Pressure software.
Designed for True Portability and Productivity
• Lightweight and Compact – Carry the 3130-G2M anywhere; internal storage keeps everything organized and ready for action.
• Field-Ready Power – Up to 50 hours of battery life means you can work longer between charges, with enough power for a full day’s work in demanding environments.
• Easy to Use – Intuitive controls, clear displays, and straightforward operation reduce training time and make every calibration easier.
Automate, Document, and Improve Accuracy
Connect the Fluke 3130-G2M Portable Pressure Calibrator to your PC to automate calibration routines, log results, and enhance traceability. With Fluke COMPASS for Pressure software, you can streamline workflows, improve data integrity, and deliver professional calibration documentation—right from the field.
Experience the convenience, accuracy, and rugged reliability of the Fluke 3130-G2M Portable Pressure Calibrator—your all-in-one solution for pressure calibration, wherever the job takes you.
Key Features
• Measure/generate pressures from vacuum to 2 MPa (300 psi, 20 bar).
• Measure/generate 4 to 20 mA, measures 0 to 30 V DC
• Generate vacuum to -80 kPa (-12 psi, -0.8 bar) or pressure to 2 MPa (300 psi, 20 bar).
• External gas supply up to 2 MPa (300 psi, 20 bar).
• Fine pressure adjustment.
• Measurement accuracy of ± (0.025 % reading + 0.01 % FS).
Key Features and Benefits
• Integrated Motorized Pump – Say goodbye to manual hand pumps. The powerful, internal motorized pump delivers fast, effortless pressure generation and control, saving time and eliminating operator fatigue.
• Supports Large Volume Applications – Easily connect to an external gas supply, such as plant air, for quick pressurization of large systems. Fine-tune pressure precisely with the built-in variable volume.
• High-Accuracy Pressure Measurement – The onboard sensor provides reliable measurements up to 2 MPa (300 psi, 20 bar) with outstanding accuracy of ±0.025% of reading + 0.01% FS—including all major sources of error.
• Flexible Measurement Range – Expand your capability by connecting Fluke 700P pressure modules, ensuring precision across a wider range of pressures for any application.
• Comprehensive Electrical Measurement – Calibrate pressure transducers and transmitters with built-in support for 4–20 mA and 0–30 V DC measurements. The 3130-G2M can also supply 24 V DC power and source 4–20 mA current, streamlining transmitter testing.
• Rugged, Portable Design – Built tough for the field, the 3130-G2M features a ruggedized case with internal storage for leads, fittings, and power supply. A rechargeable NiMH battery delivers up to 50 hours of operation, or 100 calibrations to 300 psi per charge.
• Simple Battery Recharge – Just plug in with the included universal mains adapter—no special chargers required.
• Seamless Automation and Data Logging – Easily connect to your PC using the Fluke Calibration 700SC Serial Interface Cable and control your calibrator or log data using Fluke Calibration COMPASS for Pressure software.
Designed for True Portability and Productivity
• Lightweight and Compact – Carry the 3130-G2M anywhere; internal storage keeps everything organized and ready for action.
• Field-Ready Power – Up to 50 hours of battery life means you can work longer between charges, with enough power for a full day’s work in demanding environments.
• Easy to Use – Intuitive controls, clear displays, and straightforward operation reduce training time and make every calibration easier.
Automate, Document, and Improve Accuracy
Connect the Fluke 3130-G2M Portable Pressure Calibrator to your PC to automate calibration routines, log results, and enhance traceability. With Fluke COMPASS for Pressure software, you can streamline workflows, improve data integrity, and deliver professional calibration documentation—right from the field.
Experience the convenience, accuracy, and rugged reliability of the Fluke 3130-G2M Portable Pressure Calibrator—your all-in-one solution for pressure calibration, wherever the job takes you.
Key Features
• Measure/generate pressures from vacuum to 2 MPa (300 psi, 20 bar).
• Measure/generate 4 to 20 mA, measures 0 to 30 V DC
• Generate vacuum to -80 kPa (-12 psi, -0.8 bar) or pressure to 2 MPa (300 psi, 20 bar).
• External gas supply up to 2 MPa (300 psi, 20 bar).
• Fine pressure adjustment.
• Measurement accuracy of ± (0.025 % reading + 0.01 % FS).
With Hardened and polished taper blades, enclosed in a steel case metric feeler blades from Kennedy are clearly marked for easy identification.
Features and Benefits
• Hardened and polished taper blades, enclosed in a steel case
• Blades are clearly marked for easy identification
Standards
• Manufactured to DIN 2275
Typical Applications
• Mechanical
• Engineering
Notes
• Range: 10 Blade: .05 - .80mm. 13 and 20 Blade: .05 - 1mm
Features and Benefits
• Hardened and polished taper blades, enclosed in a steel case
• Blades are clearly marked for easy identification
Standards
• Manufactured to DIN 2275
Typical Applications
• Mechanical
• Engineering
Notes
• Range: 10 Blade: .05 - .80mm. 13 and 20 Blade: .05 - 1mm