Products

The Dräger PSS® 3000 is a new generation of high performing breathing apparatus for industrial applications. Combining comfort with exceptional performance, it is designed for applications where simplicity and ease of use are essential. Lightweight yet robust, and easy to wear, this advanced breathing apparatus provides the ultimate in breathing protection.

Series J100 - Metric general purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite.

Features and Benefits
• High speed steel construction with bright finish for increased toughness
• Supplied in the as-ground condition for use with non ferrous materials

Standards
• Manufactured to BS 328/DIN338RN

Notes
• Drills with a bright finish are supplied in the as-ground condition and such tools are used generally in the machining of non-ferrous materials.

Available in Female to Male and Female to Female fitting.


Pressure range: 0 to +10bar.


Temperature range: -25 to +90°C.

Series J100 - Metric general purpose drills for steels, cast steel, grey cast iron, malleable cast iron, nickel brass, aluminium alloy and graphite.

Features and Benefits
• High speed steel construction with bright finish for increased toughness
• Supplied in the as-ground condition for use with non ferrous materials

Standards
• Manufactured to BS 328/DIN338RN

Notes
• Drills with a bright finish are supplied in the as-ground condition and such tools are used generally in the machining of non-ferrous materials.

These Insulated End Wire Strippers are especially suitable for production line environments where repetitive work is undertaken. Possessing a double polished head and joint with induction hardened cutting edges, insulated design and a chrome vanadium steel construction.

Features and Benefits
• Induction hardened cutting edges effectively delivers clean and accurate wire stripping
• Insulated handles protect the user when working on wires
• Manufactured from chrome vanadium steel for durability and optimum performance
• Double polished head and joint makes for an easier tool clean

Typical Applications
• DIY
• Electrical
• Construction

Standards
• DIN EN IEC 60900

Widely used for fixing pipes and cables in all industries.





Features and Benefits


• Zinc plated to protect against corrosion


• Durable steel base material


• Available in a comprehensive range of sizes





Standards


• DIN 72571

With a bonded vinyl-coated handle, double polished head and joint and an induction hardened cutting edge, this range of diagonal cutters are designed to give added strength at the point yet still fit into confined spaces. The cutting edge is offset at a slight angle to the handles to allow close cuts to a flat surface. Available in three sizes to suit your needs.

Features and Benefits
• Vinyl coated handle for bolstered grip and comfort whilst using
• Available in three sizes to allow you to purchase the product best suited to your needs
• Offset cutting edge allow for close cuts to a flat surface
• Double polished head and joints repels dirt and grime

Typical Applications
• Automotive
• Electrical
• Construction

The Dräger PSS ® 4000 is one of the lightest professional self-contained breathing apparatus for firefighters. Combining comfort with outstanding pneumatic performance, this SCBA is designed for use in places where simplicity and ease of use are important. Lightweight yet strong and easy to wear, PSS ® 4000 provides superior protection.

The J100 Series are general purpose HSS straight shank drills with a black oxide finish. Ideal for applications involving steel (including cast steel) cast iron (including malleable cast iron) as well as nickel, brass aluminium alloys and graphite. Their 118° point allows for precise hole alignment and reliable cutting performance whilst the black oxide coating helps reduce heat by retaining coolant on the tool surface. The coating also helps reduce the risk of the tool staining.

Features and Benefits
• High speed steel construction for increased tool durability
• Point angle of 118° for precise holemaking and precision cutting
• Black oxide coating helps aid chip flow, reduce heat and prevent staining
• Ideal for applications involving steel, iron, nickel, brass, aluminium alloy and graphite

Typical Applications
• Cutting and drilling
• Ferrous materials
• Steel
• Iron
• Nickel
• Brass
• Aluminium alloy
• Graphite

Notes
• Available in sizes 0.25mm -20.00mm

Standards
• Manufactured to BS 328/DIN338RN

A set of three Sherwood HSS Taps ideal for the general purpose option for thread cutting in most materials including steel, some stainless steels, cast irons and non-ferrous materials such as Aluminium, Brass and many others.

Features and Benefits
• Manufactured from durable high speed steel
• Precision ground flutes for accurate thread cutting
• Features class 2 thread forms with medium fit tolerance
• Manufactured with a bright finish

Typical Applications
• Tapping
• Steel
• Brass
• Aluminium
• Engineering
• Manufacturing

Standards
• Tap dimensions to ISO529
• Thread Forms are Class 2 medium fit tolerance
• Straight Flute Individual Sizes IS0 529

Notes
• Available in sizes 1.0 x 0.25mm - 48 x 5.00mm
• Set of 3 - 1 Taper, second and plug

Second Cut Needle File Set. Cut 2.

Features and Benefits
• Supplied in convenient PVC Wallet
• Files are extremely durable

Contents
• (1 of each): Warding, Hand, Half Round, Round, Square, Three Square

Standards Met
• Manufactured to BS 498:1990.

Durable retaining springs, suitable for use with Kobe air hammers.

Features and Benefits
• Allows fast and simple attachment/removal
• Versatile, and available in several types for use in any application

Typical Applications
• Suitable for use with all Kobe air hammers