Tools & Chemicals
Kennedy 160mm Side Cutters
With a bonded vinyl-coated handle, double polished head and joint and an induction hardened cutting edge, this range of diagonal cutters are designed to give added strength at the point yet still fit into confined spaces. The cutting edge is offset at a slight angle to the handles to allow close cuts to a flat surface. Available in three sizes to suit your needs.
Features and Benefits
• Vinyl coated handle for bolstered grip and comfort whilst using
• Available in three sizes to allow you to purchase the product best suited to your needs
• Offset cutting edge allow for close cuts to a flat surface
• Double polished head and joints repels dirt and grime
Typical Applications
• Automotive
• Electrical
• Construction
Features and Benefits
• Vinyl coated handle for bolstered grip and comfort whilst using
• Available in three sizes to allow you to purchase the product best suited to your needs
• Offset cutting edge allow for close cuts to a flat surface
• Double polished head and joints repels dirt and grime
Typical Applications
• Automotive
• Electrical
• Construction
Download
Products Lainnya
With an extruded aluminium body with a powder-coated finish, this range of box spirit levels is suited for professional use. Possessing 3 high visibility vials, 1 horizontal and 2 vertical, each product has an accuracy of 0.5mm/m. Featuring shock-absorbing end caps and milled working faces on top and bottom for precise measurement, a rule scale for ease of marking out and larger sizes possess hand grips. Available in varying sizes to suit your requirements.
Features and Benefits
• 3 vials at 45° horizontal and vertical
• Shock absorbing end caps protect the product if accidentally dropped
• Hand grips make the product easy to carry and transport wherever necessary (except KEN5103300K)
• Rule scale allows for easy marking out and measuring
• Aluminium body is durable and powder coating bolsters protection against wear and tear
• Available in a variety of sizes to suit your desires
• Milled working faces on the top and bottom of the products for accuracy and precise measuring
Typical Applications
• Construction
• DIY
• Plumbing
• Electrical
Features and Benefits
• 3 vials at 45° horizontal and vertical
• Shock absorbing end caps protect the product if accidentally dropped
• Hand grips make the product easy to carry and transport wherever necessary (except KEN5103300K)
• Rule scale allows for easy marking out and measuring
• Aluminium body is durable and powder coating bolsters protection against wear and tear
• Available in a variety of sizes to suit your desires
• Milled working faces on the top and bottom of the products for accuracy and precise measuring
Typical Applications
• Construction
• DIY
• Plumbing
• Electrical
30 - 75mm
For removing bearings, gears, sprockets and bushes. Metal storage case.
Contents:
1x 7” thrust bolt.
1x 30 - 50mm separator.
1x 50 - 75mm separator.
2x 80 and 100mm main rods.
2x 90 and 110mm extension rods.
1x beam.
For removing bearings, gears, sprockets and bushes. Metal storage case.
Contents:
1x 7” thrust bolt.
1x 30 - 50mm separator.
1x 50 - 75mm separator.
2x 80 and 100mm main rods.
2x 90 and 110mm extension rods.
1x beam.
Manufactured from forged and hardened steel, these ring slogging spanners also possess machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners, the product is available in a variety of metric sizes to ensure you find the correct size for your needs.
Features and Benefits
• Forged steel construction makes for a durable product
• Flat striking faces enable the product to be struck with a hammer if needed
• Corrosion-resistant finish bolsters product longevity
• Available in an array of sizes to suit varying specifications
Typical Applications
• Automotive
• Construction
• Plumbing
Standards
• Conforms to DIN 7444
Features and Benefits
• Forged steel construction makes for a durable product
• Flat striking faces enable the product to be struck with a hammer if needed
• Corrosion-resistant finish bolsters product longevity
• Available in an array of sizes to suit varying specifications
Typical Applications
• Automotive
• Construction
• Plumbing
Standards
• Conforms to DIN 7444
Supplied in metric sizes, this range of double-ended spanners is highly versatile. Constructed from chrome vanadium steel* with a satin finish body and highly polished heads, the product is completed by a 15° offset angled head. Available in multiple sizes to allow you to select the product best suited to your application.
Features and Benefits
• Manufactured from chrome vanadium steel* which is highly robust and durable
• Double-ended design gives double the tool life and use
• Highly polished heads repel dirt and grime and make for easier cleaning
• 15° offset angled head allows for access in restricted areas and makes turning easier
• Available in an array of sizes to suit your specific application
Typical Applications
• Plumbing
• DIY
• Automotive
• Engineering
Standards
• ASME B107: Sizes 36 x 41mm to 46mm x 50mm
• DIN 3310: Sizes 4 x 5mm to 32 x 36mm
Notes
• *36 x 41, 41 x 46, 46 x 50mm are made from drop forged carbon steel
Features and Benefits
• Manufactured from chrome vanadium steel* which is highly robust and durable
• Double-ended design gives double the tool life and use
• Highly polished heads repel dirt and grime and make for easier cleaning
• 15° offset angled head allows for access in restricted areas and makes turning easier
• Available in an array of sizes to suit your specific application
Typical Applications
• Plumbing
• DIY
• Automotive
• Engineering
Standards
• ASME B107: Sizes 36 x 41mm to 46mm x 50mm
• DIN 3310: Sizes 4 x 5mm to 32 x 36mm
Notes
• *36 x 41, 41 x 46, 46 x 50mm are made from drop forged carbon steel