Tools & Chemicals
Kennedy Stubby Flat Head Screwdriver Slotted 6.5mm x 38mm
Designed for maximum grip under load application, these Hi-Grip screwdrivers have a slotted tip, round blade and a flared flat head. The red moulded cushion grip gives optimum operator comfort, making the product ideally suited for assembly work. The tough alloy steel blades possess a satin finish whilst the product has magnetic tips, hardened and ground to prolong tool life. Available in a variety of sizes to suit your requirements. Slotted head screws are the most commonly used screw. To safely drive these screws, the tip of the screwdriver should be of the same width as the slot in the screw head and fill it as well, to minimise slipping and deforming the screw head.
Features and Benefits
• Slotted head screws are the most commonly used, meaning these screwdrivers are a must for any well rounded tool kit
• Blades are manufactured from tough alloy steel for durability
• Magnetised tips hold the fasteners in place when driving for more accurate results
• Red, moulded cushion grip is designed to boost user comfort, grip and control
• Available in a range of sizes and styles to suit your needs
Typical Applications
• DIY
• Electrical
• Construction
• Automotive
Features and Benefits
• Slotted head screws are the most commonly used, meaning these screwdrivers are a must for any well rounded tool kit
• Blades are manufactured from tough alloy steel for durability
• Magnetised tips hold the fasteners in place when driving for more accurate results
• Red, moulded cushion grip is designed to boost user comfort, grip and control
• Available in a range of sizes and styles to suit your needs
Typical Applications
• DIY
• Electrical
• Construction
• Automotive
Download
Produk Lainnya
Designed for maximum grip under load application, this 12 piece screwdriver set contains an array of Pozi, Phillips and Flared drivers. All products possess a red moulded cushion grip to give optimum operator comfort. Ideal for assembly work, each driver boasts a blade made of tough chrome vanadium steel with a satin finish and magnetic tips, hardened and ground to prolong tool life. Supplied in a clear plastic wallet.
Features and Benefits
• Each driver possesses a red moulded cushion grip for maximum comfort, grip and control when using
• 12 piece set ensures you have a variety of screwdriver styles to hand for multiple applications including Flared, Pozi and Phillips
• Magnetic tips effectively hold fasteners in place when loosening or tightening
• Blades are manufactured from tough chrome vanadium steel for overall tool longevity
• Supplied in a clear plastic wallet to protect, organise and store your tools
Contents
• Flared: 6.5 stubby, 6.5 x 100, 6.5 x 150, 8.0 x 200 and 10.0 x 250
• PZ: No.1 x 75, No.2 x 100, No.3 x 150
• Crosspoint: No.1 x 75, No.2 stubby, No.2 x 100, No.3 x 150
Typical Applications
• Engineering
• Construction
• Automotive
• DIY
Features and Benefits
• Each driver possesses a red moulded cushion grip for maximum comfort, grip and control when using
• 12 piece set ensures you have a variety of screwdriver styles to hand for multiple applications including Flared, Pozi and Phillips
• Magnetic tips effectively hold fasteners in place when loosening or tightening
• Blades are manufactured from tough chrome vanadium steel for overall tool longevity
• Supplied in a clear plastic wallet to protect, organise and store your tools
Contents
• Flared: 6.5 stubby, 6.5 x 100, 6.5 x 150, 8.0 x 200 and 10.0 x 250
• PZ: No.1 x 75, No.2 x 100, No.3 x 150
• Crosspoint: No.1 x 75, No.2 stubby, No.2 x 100, No.3 x 150
Typical Applications
• Engineering
• Construction
• Automotive
• DIY
Club (or lump) hammers are fully forged and heat treated with a flat face and chamfered edge for use with cold chisels, brick bolsters, star drills and masonry nails. Fitted with a fibreglass shaft and textured slip resistant rubber grip. Shaft and grip combine to dampen the impact transmitted through to the user's hand and wrist which in turn reduces operator fatigue and the risk of repetitive strain injury (RSI).
Features and Benefits
• Fibreglass shaft dampens impact through the user's hand and wrist to minimise the risk of RSI (Repetitive Strain Injury)
• Textured slip-resistant grip improves user control and comfort
• Head is manufactured from fully forged steel for durability and good impact
• Possesses an anti-vibration design
Typical Applications
• For use with cold chisels, brick bolsters, star drills and masonry nails
Features and Benefits
• Fibreglass shaft dampens impact through the user's hand and wrist to minimise the risk of RSI (Repetitive Strain Injury)
• Textured slip-resistant grip improves user control and comfort
• Head is manufactured from fully forged steel for durability and good impact
• Possesses an anti-vibration design
Typical Applications
• For use with cold chisels, brick bolsters, star drills and masonry nails
Designed specifically for boiler scaling, weld dressing and chiiping away slag after arc welding, this chipping hammer is extremely hardy. Fitted with a close grain hardwood shaft, the head is manufactured from tempered and hardened steel and possesses chisel and point striking faces.
Features and Benefits
• Chisel and point striking faces provide multiple use and versatility
• Hardwood shaft is extremely durable and can withstand regular use
• High carbon steel head is resilient and has been tempered and hardened for guaranteed longevity
Typical Applications
• Welding
• Construction
Features and Benefits
• Chisel and point striking faces provide multiple use and versatility
• Hardwood shaft is extremely durable and can withstand regular use
• High carbon steel head is resilient and has been tempered and hardened for guaranteed longevity
Typical Applications
• Welding
• Construction
Kennedy® mechanics torque wrench is chrome plated with a polished steel head and retractable torque setting lever. "Click & Snap" action indicates when the pre-set torque level has been reached. Push through square drive connector instantly reverses the action for quick and simple operation.
Features and Benefits
• Available in a variety of sizes to suit your requirements
• Repeatable accuracy of +/- 4% for precise turning
• Manufactured from steel and chrome plated for durability and resistance to corrosion
• Easily reversed via the push through connector
• 4 easy read scales (Nm, kgf.m, lbf.in x 10, lbf.ft.) for versatility of measuring
• Supplied with factory tested calibration certificate
Typical Applications
• Construction
• Engineering
• Automotive
Standards
• ISO 6789-2:2017 & ASME B107.14M-2004
• ASME B107.14M-2004
• DIN ISO6789
Features and Benefits
• Available in a variety of sizes to suit your requirements
• Repeatable accuracy of +/- 4% for precise turning
• Manufactured from steel and chrome plated for durability and resistance to corrosion
• Easily reversed via the push through connector
• 4 easy read scales (Nm, kgf.m, lbf.in x 10, lbf.ft.) for versatility of measuring
• Supplied with factory tested calibration certificate
Typical Applications
• Construction
• Engineering
• Automotive
Standards
• ISO 6789-2:2017 & ASME B107.14M-2004
• ASME B107.14M-2004
• DIN ISO6789