Tools & Chemicals
Kennedy Insulated Electricians Screwdriver Slotted 2.5mm x 85mm
Volt-tested to ensure safety on or near electrical equipment up to 1000V AC or 1500V DC, this range of VDE insulated screwdrivers is suited for electrical use. The blades are insulated with magnetic, parallel tips. Slotted head screws are the most commonly used screw. The tip of the screwdriver should be of the same width as the slot in the screw head and fill it as well, to minimise slipping. The product is finished with a high grip handle and is available in a range of sizes.
Features and Benefits
• Magnetised tips allow you to effectively hold fasteners in place to apply torque accurately
• Available in a range of sizes to suit your needs
• High grip handles ensure maximum control and comfort when using
• All products are VDE tested up to 1000V AC or 1500V DC to ensure your safety
Typical Applications
• Construction
• DIY
• Electrical
Standards
• DIN 7438
• DIN EN 60900
Features and Benefits
• Magnetised tips allow you to effectively hold fasteners in place to apply torque accurately
• Available in a range of sizes to suit your needs
• High grip handles ensure maximum control and comfort when using
• All products are VDE tested up to 1000V AC or 1500V DC to ensure your safety
Typical Applications
• Construction
• DIY
• Electrical
Standards
• DIN 7438
• DIN EN 60900
Download
Produk Lainnya
The 1 inch square drive, deep impact socket from Kennedy® is made from chrome molybdenum alloy steel with a black oxidised finish. The socket is clearly marked making it easy to identify for a quicker selection.
Features and Benefits
• Chrome molybdenum alloy steel for greater durability
• Black oxidised finish for prolonged tool lifespan
• Permanent laser-etched markings for easy tool identification
Standards
• Conforms to DIN 3129
Features and Benefits
• Chrome molybdenum alloy steel for greater durability
• Black oxidised finish for prolonged tool lifespan
• Permanent laser-etched markings for easy tool identification
Standards
• Conforms to DIN 3129
Linesman Pliers
Serrated jaws for gripping nuts, bolts, studs etc. with side cutter and slip guard
safety handles.
Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Beryllium Copper are manufactured to 30-10HRC and offer a breaking strain of 1117 N/m - 1236 N/m. Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark resistant properties, is essential.
Serrated jaws for gripping nuts, bolts, studs etc. with side cutter and slip guard
safety handles.
Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Beryllium Copper are manufactured to 30-10HRC and offer a breaking strain of 1117 N/m - 1236 N/m. Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark resistant properties, is essential.
This dead blow hammer is comprised of a PVC shaft and head. Inside the hammer head are steel pellets which impact a split second after the hammer face, reducing rebound.
Features and Benefits
• PVC head with steel pellets to reduce rebound
• PVC shaft to help deliver solid blows
• Ergonomic ridged handle for better grip
Typical Applications
• Construction
• Camping
Features and Benefits
• PVC head with steel pellets to reduce rebound
• PVC shaft to help deliver solid blows
• Ergonomic ridged handle for better grip
Typical Applications
• Construction
• Camping
For cutting and stripping single core wire 0.2mm to 6mm diameter, this pair of automatic wires strippers is ideal for general purpose stripping and cutting. Also with bypass action cutting blades with blade guard for clean and safe wire cutting. Spring tensioned handles and graduated, twin blade stripping jaw optimise the tool to ensure the constant and accurate length of stripped ends. Manufactured from pressed steel with a riveted body, finished by a PU coating.
Features and Benefits
• Bypass action cutting blades makes for easier cutting action
• Blade guard protects the user and makes for a safer product
• Spring tensioned handles reduce hand fatigue
• Twin blade stripping jaw ensures constant and accurate wire stripping
• Body is manufactured from pressed steel with a PU coated body for bolstered durability and user comfort
Typical Applications
• Electrical
• Construction
• DIY
Features and Benefits
• Bypass action cutting blades makes for easier cutting action
• Blade guard protects the user and makes for a safer product
• Spring tensioned handles reduce hand fatigue
• Twin blade stripping jaw ensures constant and accurate wire stripping
• Body is manufactured from pressed steel with a PU coated body for bolstered durability and user comfort
Typical Applications
• Electrical
• Construction
• DIY