Tools & Chemicals
WD 40 FOOD GRADE SILICONE COLOURLESS
• Bersertifikat NSF: Register Hldan H2
• Didesain untuk aplikasi penanganan industri makanan & pengolahan makanan
• Lapisan film yang tidak berwarna, lidak berbau, tidak meninggalkan noda
• Didesain untuk aplikasi penanganan industri makanan & pengolahan makanan
• Lapisan film yang tidak berwarna, lidak berbau, tidak meninggalkan noda
Download
Produk Lainnya
With an accuracy of 1m/m, these boat levels are ideal for use by professionals such as scaffolders. Manufactured from die cast aluminium with a powder coated finish, each product has a milled measuring face for improved accuracy. With 1 vertical and 1 horizontal vial for normal and upside down measuring, the product can be purchased with a regular or a magnetic base. Supplied with a leather belt pouch.
Features and Benefits
• Possesses a milled measuring face for optimum measuring accuracy
• Both models have two vials with vertical and horizontal viewing positions for versatility
• Supplied with a leather belt pouch for you to effectively store and transport your tool
• Magnetic base allows you to attach the product to a ferrous material for additional stability when measuring (product KEN5100160K only)
• Die cast aluminium body with a powder coat finish makes for a highly robust product
Typical Applications
• Woodworking
• DIY
• Constrution
Features and Benefits
• Possesses a milled measuring face for optimum measuring accuracy
• Both models have two vials with vertical and horizontal viewing positions for versatility
• Supplied with a leather belt pouch for you to effectively store and transport your tool
• Magnetic base allows you to attach the product to a ferrous material for additional stability when measuring (product KEN5100160K only)
• Die cast aluminium body with a powder coat finish makes for a highly robust product
Typical Applications
• Woodworking
• DIY
• Constrution
Volt-tested to ensure safety on or near electrical equipment up to 1000V AC or 1500V DC.
Insulated blades with magnetic tips. Conform with DIN 7438 and DIN EN 60900.
Features and Benefits
• The red underlay gives instant recognition of a missing tool and the top layer of foam is durable for industrial use.
• Finger cut-outs make tool retrieval very easy. This is extremely efficient as it eliminates the struggle of digging out the tools multiple times.
• Rapid tool location for instant use.
• Protection of expensive kit.
• Prevention of tools sliding around during transit.
• Avoids loss or theft of tools.
• Easy to see if tools are not replaced.
• Safety and peace of mind as tools will not be left within aircraft/vehicles/machinery
Insulated blades with magnetic tips. Conform with DIN 7438 and DIN EN 60900.
Features and Benefits
• The red underlay gives instant recognition of a missing tool and the top layer of foam is durable for industrial use.
• Finger cut-outs make tool retrieval very easy. This is extremely efficient as it eliminates the struggle of digging out the tools multiple times.
• Rapid tool location for instant use.
• Protection of expensive kit.
• Prevention of tools sliding around during transit.
• Avoids loss or theft of tools.
• Easy to see if tools are not replaced.
• Safety and peace of mind as tools will not be left within aircraft/vehicles/machinery
Socket Set 1/2" Square Drive
Sockets: 10, 11, 12, 14, 17, 19, 22, 24, 27, 30 and 32mm.
Accessories: 250mm ratchet wrench, 250mm sliding T-handle, 400mm speed brace, 125 and 250mm socket extensions.
Supplied with case and tool control inserts.
Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Beryllium Copper are manufactured to 30-10HRC and offer a breaking strain of 1117 N/m - 1236 N/m. Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark resistant properties, is essential.
Sockets: 10, 11, 12, 14, 17, 19, 22, 24, 27, 30 and 32mm.
Accessories: 250mm ratchet wrench, 250mm sliding T-handle, 400mm speed brace, 125 and 250mm socket extensions.
Supplied with case and tool control inserts.
Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Beryllium Copper are manufactured to 30-10HRC and offer a breaking strain of 1117 N/m - 1236 N/m. Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark resistant properties, is essential.
Parallel edges, one edge uncut. For flat filing, corner filing and deburring. Multi-purpose and for other work where a 'safe' or uncut edge is needed. Double cut. Available in a comprehensive range of shapes and sizes.
Features and Benefits
• Highly durable construction for long-lasting files
• Compatible with most handles
• Suitable for use with a range of materials
Standards Met
• Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.
Features and Benefits
• Highly durable construction for long-lasting files
• Compatible with most handles
• Suitable for use with a range of materials
Standards Met
• Manufactured to BS 498 : 1990 and American Federal Standard GGG-f-325b.