Tools & Chemicals
Kennedy 7 Piece Insulated VDE Screwdriver Set in 1/3 Width Foam Inlay for Tool Cabinets
Volt-tested to ensure safety on or near electrical equipment up to 1000V AC or 1500V DC.
Insulated blades with magnetic tips. Conform with DIN 7438 and DIN EN 60900.
Features and Benefits
• The red underlay gives instant recognition of a missing tool and the top layer of foam is durable for industrial use.
• Finger cut-outs make tool retrieval very easy. This is extremely efficient as it eliminates the struggle of digging out the tools multiple times.
• Rapid tool location for instant use.
• Protection of expensive kit.
• Prevention of tools sliding around during transit.
• Avoids loss or theft of tools.
• Easy to see if tools are not replaced.
• Safety and peace of mind as tools will not be left within aircraft/vehicles/machinery
Insulated blades with magnetic tips. Conform with DIN 7438 and DIN EN 60900.
Features and Benefits
• The red underlay gives instant recognition of a missing tool and the top layer of foam is durable for industrial use.
• Finger cut-outs make tool retrieval very easy. This is extremely efficient as it eliminates the struggle of digging out the tools multiple times.
• Rapid tool location for instant use.
• Protection of expensive kit.
• Prevention of tools sliding around during transit.
• Avoids loss or theft of tools.
• Easy to see if tools are not replaced.
• Safety and peace of mind as tools will not be left within aircraft/vehicles/machinery
Download
Produk Lainnya
A highly reliable commercial duty circuit tester, built to industry standards. Suitable for use with power on. For 6, 12 and 24V automotive systems only.
Features and Benefits
• Easily locates shorts, earths and open circuits
• 1.4m heavy duty lead with spring strain relief
• Super sharp stainless steel probe to test through wire insulation
• Long 100mm probe length
Features and Benefits
• Easily locates shorts, earths and open circuits
• 1.4m heavy duty lead with spring strain relief
• Super sharp stainless steel probe to test through wire insulation
• Long 100mm probe length
With an extruded aluminium body with a powder-coated finish, this range of box spirit levels is suited for professional use. Possessing 3 high visibility vials, 1 horizontal and 2 vertical, each product has an accuracy of 0.5mm/m. Featuring shock-absorbing end caps and milled working faces on top and bottom for precise measurement, a rule scale for ease of marking out and larger sizes possess hand grips. Available in varying sizes to suit your requirements.
Features and Benefits
• 3 vials at 45° horizontal and vertical
• Shock absorbing end caps protect the product if accidentally dropped
• Hand grips make the product easy to carry and transport wherever necessary (except KEN5103300K)
• Rule scale allows for easy marking out and measuring
• Aluminium body is durable and powder coating bolsters protection against wear and tear
• Available in a variety of sizes to suit your desires
• Milled working faces on the top and bottom of the products for accuracy and precise measuring
Typical Applications
• Construction
• DIY
• Plumbing
• Electrical
Features and Benefits
• 3 vials at 45° horizontal and vertical
• Shock absorbing end caps protect the product if accidentally dropped
• Hand grips make the product easy to carry and transport wherever necessary (except KEN5103300K)
• Rule scale allows for easy marking out and measuring
• Aluminium body is durable and powder coating bolsters protection against wear and tear
• Available in a variety of sizes to suit your desires
• Milled working faces on the top and bottom of the products for accuracy and precise measuring
Typical Applications
• Construction
• DIY
• Plumbing
• Electrical
The 1 inch square drive, deep impact socket from Kennedy® is made from chrome molybdenum alloy steel with a black oxidised finish. The socket is clearly marked making it easy to identify for a quicker selection.
Features and Benefits
• Chrome molybdenum alloy steel for greater durability
• Black oxidised finish for prolonged tool lifespan
• Permanent laser-etched markings for easy tool identification
Standards
• Conforms to DIN 3129
Features and Benefits
• Chrome molybdenum alloy steel for greater durability
• Black oxidised finish for prolonged tool lifespan
• Permanent laser-etched markings for easy tool identification
Standards
• Conforms to DIN 3129
Supplied in metric sizes, this range of double-ended spanners is highly versatile. Constructed from chrome vanadium steel* with a satin finish body and highly polished heads, the product is completed by a 15° offset angled head. Available in multiple sizes to allow you to select the product best suited to your application.
Features and Benefits
• Manufactured from chrome vanadium steel* which is highly robust and durable
• Double-ended design gives double the tool life and use
• Highly polished heads repel dirt and grime and make for easier cleaning
• 15° offset angled head allows for access in restricted areas and makes turning easier
• Available in an array of sizes to suit your specific application
Typical Applications
• Plumbing
• DIY
• Automotive
• Engineering
Standards
• ASME B107: Sizes 36 x 41mm to 46mm x 50mm
• DIN 3310: Sizes 4 x 5mm to 32 x 36mm
Notes
• *36 x 41, 41 x 46, 46 x 50mm are made from drop forged carbon steel
Features and Benefits
• Manufactured from chrome vanadium steel* which is highly robust and durable
• Double-ended design gives double the tool life and use
• Highly polished heads repel dirt and grime and make for easier cleaning
• 15° offset angled head allows for access in restricted areas and makes turning easier
• Available in an array of sizes to suit your specific application
Typical Applications
• Plumbing
• DIY
• Automotive
• Engineering
Standards
• ASME B107: Sizes 36 x 41mm to 46mm x 50mm
• DIN 3310: Sizes 4 x 5mm to 32 x 36mm
Notes
• *36 x 41, 41 x 46, 46 x 50mm are made from drop forged carbon steel