Tools & Chemicals
Kengrip 3/8in. Socket Set, Metric, Set of 50
For use with regular hex and bi-hex sockets, the fifty piece side drive socket set from Kennedy® provides every size socket you'll ever need. Made from high-quality chrome vanadium steel, all tools are corrosion resistant and will provide a long service life.
Features and Benefits
• Grips nuts and bolts which are up to 95% rounded off
• Will not damage new, worn or rusted nuts and bolts
• Fits a wide range Metric, UNC, UNF, BSW, BSF and E-Torx® sizes
• Unique 'Double-Knurl' for high grip
• Chrome Vanadium Side Drive Socket Sets
• Fully chrome plated finish for easy clean
Contents
• Standard Sockets: 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm
• Deep Sockets: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 17mm, 19mm, 22mm
• Screwdriver Bits: Slotted 5mm, 5.5mm, 6.5mm
• Crosspoint No.1, 2, 3, 4
• Hexagon Sockets: 3mm, 4mm, 5mm, 6mm, 8mm, 10mm
• 1x ratchet handle
• 1x sliding T-handle
• 1x spinner handle
• 1x swivel handle
• 1x universal joint,
• 125mm and 250mm extensions
• 250mm wobble extensions
• 1/4" and 1/2" male adaptors
• 1/4" socket bit coupler
• Robust fitted case with security padlock hole and cushion grip handle
Features and Benefits
• Grips nuts and bolts which are up to 95% rounded off
• Will not damage new, worn or rusted nuts and bolts
• Fits a wide range Metric, UNC, UNF, BSW, BSF and E-Torx® sizes
• Unique 'Double-Knurl' for high grip
• Chrome Vanadium Side Drive Socket Sets
• Fully chrome plated finish for easy clean
Contents
• Standard Sockets: 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm
• Deep Sockets: 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 17mm, 19mm, 22mm
• Screwdriver Bits: Slotted 5mm, 5.5mm, 6.5mm
• Crosspoint No.1, 2, 3, 4
• Hexagon Sockets: 3mm, 4mm, 5mm, 6mm, 8mm, 10mm
• 1x ratchet handle
• 1x sliding T-handle
• 1x spinner handle
• 1x swivel handle
• 1x universal joint,
• 125mm and 250mm extensions
• 250mm wobble extensions
• 1/4" and 1/2" male adaptors
• 1/4" socket bit coupler
• Robust fitted case with security padlock hole and cushion grip handle
Download
Produk Lainnya
With a 1/2" square drive, these vanadium steel bi-hexagonal sockets are the ideal product for working on hard to reach fastenings or more stubborn fastenings due to their 12 point design. Possessing a higher torque than normal sockets, this range of sockets can also effectively grip worn nuts and won't round off existing nuts. Finished with a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories.
Features and Benefits
• Side drive design gives a higher torque than regular sockets
• Ball retaining groove on each product ensures a positive fit with compatible accessories
• Manufactured from vanadium steel for durability
• Available in a variety of sizes to allow you to purchase the size that best suits your requirements
• Requires only a one-twelfth turn to engage the next point of the socket
Typical Applications
• Ideal for use when tightening or loosening hexagonal shaped fastenings in a variety of industries including:
• Automotive
• Construction
• Agricultural
• Plumbing
Features and Benefits
• Side drive design gives a higher torque than regular sockets
• Ball retaining groove on each product ensures a positive fit with compatible accessories
• Manufactured from vanadium steel for durability
• Available in a variety of sizes to allow you to purchase the size that best suits your requirements
• Requires only a one-twelfth turn to engage the next point of the socket
Typical Applications
• Ideal for use when tightening or loosening hexagonal shaped fastenings in a variety of industries including:
• Automotive
• Construction
• Agricultural
• Plumbing
Expert quality, hardened and tempered chrome alloy steel blades. Fitted with a unique dual grip handle with revolving top designed for added user comfort whilst allowing more torque to be applied.
TX
TX head screws are used predominantly for engineering and automotive applications.
The design of the screw allows high torque levels to be applied without the driver slipping.
TX
TX head screws are used predominantly for engineering and automotive applications.
The design of the screw allows high torque levels to be applied without the driver slipping.
Comprising of a textured rubber case, lacquered blade and locking spring assisted blade return, this range of tape measures are ideal for working professionals. With a riveted metal end hook, steel belt clip and wrist strap and corrosion resistant finish, there is an emphasis on affordable quality. Complete with an action lock to hold the blade in place. Products that are 5m and longer, have tape hooks with four rivets, 3m/10' tape hooks have two. Products with a Metric/Imperial blade have 1/32", 1/16" inch and mm graduations, the metric-only blades have mm and cm graduations.
Features and Benefits
• Blades possess a lacquered finish to bolster resistance
• Available to purchase with imperial and metric graduations, or metric only to suit your preferences
• Textured rubber non-slip grip case for improved comfort and impact resistance
• Steel belt clip and wrist strap to allow for ease of transportation
• Spring assisted blade return and lock
• Riveted metal hook end allows for accurate inside and outside measuring
Typical Applications
• Ideal for professional use by carpenters, plumbers, electricians, construction workers, decorators, shop fitters and DIY enthusiasts
Warnings
• Blades are sharp and therefore are meant to be guided back into the housing to minimise risk of injury to personnel and damage to the blade
Features and Benefits
• Blades possess a lacquered finish to bolster resistance
• Available to purchase with imperial and metric graduations, or metric only to suit your preferences
• Textured rubber non-slip grip case for improved comfort and impact resistance
• Steel belt clip and wrist strap to allow for ease of transportation
• Spring assisted blade return and lock
• Riveted metal hook end allows for accurate inside and outside measuring
Typical Applications
• Ideal for professional use by carpenters, plumbers, electricians, construction workers, decorators, shop fitters and DIY enthusiasts
Warnings
• Blades are sharp and therefore are meant to be guided back into the housing to minimise risk of injury to personnel and damage to the blade
Containing both spanners and ratchet units, this set combines to make square drive ratchets to be used with standard sockets (sold separately). With a flexi-head, they are the ideal product for reaching awkwardly placed nuts as well as more general purpose fastening. manufactured from chrome scandium steel with a mirror finish and supplied in a handy storage case, this 13 piece set is the economical way to be prepared for any task.
Features and Benefits
• Supplied in a heavy duty fitted storage case to allow you to easily organise, store and transport your set
• Manufactured from chrome plated vanadium steel making it a highly durable product
• Mirror finish makes for an easy wipe clean product as well as looking aesthetically pleasing
• Flexi-head allows you to reach awkward areas as well as making storage easier
• 13 piece set is the cost effective way to ensure you always have the right tool to hand
Contents
• Flex head ratchet combination spanners: 10, 11, 12, 13, 14, 15, 16, 17 and 19mm
• Quick release square drive adaptors - 1/4" SD (x10mm hex); 3/8" SD (x13mm hex); 1/2" SD (x19mm hex)
Typical Applications
• Suited for use when loosening and tightening nuts, making it the ideal product for professionals such as mechanics, engineers, plumbers, electricians, construction workers and skilled DIY enthusiasts
Standards
• Conforms to ASME B107.6
Features and Benefits
• Supplied in a heavy duty fitted storage case to allow you to easily organise, store and transport your set
• Manufactured from chrome plated vanadium steel making it a highly durable product
• Mirror finish makes for an easy wipe clean product as well as looking aesthetically pleasing
• Flexi-head allows you to reach awkward areas as well as making storage easier
• 13 piece set is the cost effective way to ensure you always have the right tool to hand
Contents
• Flex head ratchet combination spanners: 10, 11, 12, 13, 14, 15, 16, 17 and 19mm
• Quick release square drive adaptors - 1/4" SD (x10mm hex); 3/8" SD (x13mm hex); 1/2" SD (x19mm hex)
Typical Applications
• Suited for use when loosening and tightening nuts, making it the ideal product for professionals such as mechanics, engineers, plumbers, electricians, construction workers and skilled DIY enthusiasts
Standards
• Conforms to ASME B107.6