Tools & Chemicals
Kennedy 160mm (6.5") 120/140 Half Round Diamond File
Half Round Diamond Needle File 16cm.
Available in seven shapes and two grain sizes offering the solution to finishing problems where material hardness makes conventional files ineffective. Plated with finely selected diamond powder, 120 - 150 mesh.
Features and Benefits
• Solution to finishing problems where material hardness makes conventional files ineffective
• Extremely Durable - Plated with finely selected diamond powder
• Non-slip grip handle
Typical Applications
• Can be used on tungsten carbide, ceramics, carbon, glass, fibreglass and hardened steels such as stainless steel, nimonics, titanium etc.
Available in seven shapes and two grain sizes offering the solution to finishing problems where material hardness makes conventional files ineffective. Plated with finely selected diamond powder, 120 - 150 mesh.
Features and Benefits
• Solution to finishing problems where material hardness makes conventional files ineffective
• Extremely Durable - Plated with finely selected diamond powder
• Non-slip grip handle
Typical Applications
• Can be used on tungsten carbide, ceramics, carbon, glass, fibreglass and hardened steels such as stainless steel, nimonics, titanium etc.
Download
Produk Lainnya
Made from chrome vanadium steel with a satin finish body and highly polished heads, with a double ended closed jaw bi-hexagon offset. Available in a range of sizes, the product is suited for industrial use in a range of industries.
Features and Benefits
• Available in a range of metric sizes to suit your needs
• Manufactured from chrome vanadium steel for optimum durability and product longevity
• Satin finish further protects the product against corrosion and wear and tear
• Double ended offset bi-hexagonal ring for easy turning of fasteners
• Highly polished head ensures accurate turning and repels dirt and grime
Typical Applications
• Automotive
• Engineering
• DIY
• Plumbing
Standards
• DIN 838
Features and Benefits
• Available in a range of metric sizes to suit your needs
• Manufactured from chrome vanadium steel for optimum durability and product longevity
• Satin finish further protects the product against corrosion and wear and tear
• Double ended offset bi-hexagonal ring for easy turning of fasteners
• Highly polished head ensures accurate turning and repels dirt and grime
Typical Applications
• Automotive
• Engineering
• DIY
• Plumbing
Standards
• DIN 838
Five compartment cantilever tool box with specially moulded trays to facilitate enhanced tool control. Padlock hole for additional security.
Toolbox dimensions: 470x220x245mm.
Contents:
• Sockets: 8-32mm, M10 and M14 spark plug
• 250mm sliding 'T'-handle
• 125mm & 250mm extensions, 75mm wobble extension
• Quick release 72T rubber hatchet handle
• 375mm/15" jointed knurl gripped swivel handle
• Universal joint
• Combination spanners: 6-24mm
• Pro-Torq screwdrivers: 5.5x100mm, 6.5x150mm and 8x200mm flat, No.0, No.2 and No.3 cross point
• Pro-Torq pliers: 180mm/7" combination, 150mm/6" snipe nose and 165mm/6½" diagonal
• Metric L-wrench ball driver set - 1.5-10mm
Toolbox dimensions: 470x220x245mm.
Contents:
• Sockets: 8-32mm, M10 and M14 spark plug
• 250mm sliding 'T'-handle
• 125mm & 250mm extensions, 75mm wobble extension
• Quick release 72T rubber hatchet handle
• 375mm/15" jointed knurl gripped swivel handle
• Universal joint
• Combination spanners: 6-24mm
• Pro-Torq screwdrivers: 5.5x100mm, 6.5x150mm and 8x200mm flat, No.0, No.2 and No.3 cross point
• Pro-Torq pliers: 180mm/7" combination, 150mm/6" snipe nose and 165mm/6½" diagonal
• Metric L-wrench ball driver set - 1.5-10mm
Volt-tested to ensure safety on or near electrical equipment up to 1000V AC or 1500V DC, this range of VDE insulated screwdrivers is suited for electrical use. The blades are insulated with magnetic, parallel tips. Slotted head screws are the most commonly used screw. The tip of the screwdriver should be of the same width as the slot in the screw head and fill it as well, to minimise slipping. The product is finished with a high grip handle and is available in a range of sizes.
Features and Benefits
• Magnetised tips allow you to effectively hold fasteners in place to apply torque accurately
• Available in a range of sizes to suit your needs
• High grip handles ensure maximum control and comfort when using
• All products are VDE tested up to 1000V AC or 1500V DC to ensure your safety
Typical Applications
• Construction
• DIY
• Electrical
Standards
• DIN 7438
• DIN EN 60900
Features and Benefits
• Magnetised tips allow you to effectively hold fasteners in place to apply torque accurately
• Available in a range of sizes to suit your needs
• High grip handles ensure maximum control and comfort when using
• All products are VDE tested up to 1000V AC or 1500V DC to ensure your safety
Typical Applications
• Construction
• DIY
• Electrical
Standards
• DIN 7438
• DIN EN 60900
10 ton capacity hydraulic ram with tommy bar. Supplied with three position puller legs covering a spread of 50 - 250mm and reach of 0 - 250mm.
Features and Benefits
• Highly versatile - can be used as a two or three legged puller with the same head
• Generous 10 ton capacity for excellent performance
• Supplied with storage case to keep kit safe, secure and tidy
Contents
• 1x combination head
• 1x hydraulic ram
• 3x three position puller legs
• 6x leg connectors
• 6x screw nuts, bolts and washers
• 1x 32mm extension rod
Features and Benefits
• Highly versatile - can be used as a two or three legged puller with the same head
• Generous 10 ton capacity for excellent performance
• Supplied with storage case to keep kit safe, secure and tidy
Contents
• 1x combination head
• 1x hydraulic ram
• 3x three position puller legs
• 6x leg connectors
• 6x screw nuts, bolts and washers
• 1x 32mm extension rod