Tools & Chemicals
Kennedy-Pro 10 Piece Insualted Screwdriver and Plier set
This kit of screwdrivers and pliers have fully insulated, high, grip dual material handles that are VDE tested up to 1000V. The screwdrivers have magnetic tips, chrome vanadium steel blades and a hanging hole. The pliers have chrome vanadium steel double polished head and joint heads.
Features and Benefits
• High grip dual material handles
• Magnetic tips screwdrivers with chrome vanadium steel blades and a hanging hole
• Chrome vanadium steel pliers with double polished heads
• All tools are VDE approved
Typical Applications
• Inserting various sizes of fasteners
• Gripping, twisting and cutting wire
Contents
• Screwdrivers:
• Crosspoint: No.0 x 60mm, No.1 x 80mm, No.2 x 100mm
• Parallel: 2.5 x 75mm, 4.0 x 100mm, 5.5 x 125mm, 6.5 x 150mm
• Pliers:
• 6.3/8" Pro-Torq snipe nose pliers
• 6.1/4" Pro-Torq grip nipper pliers
• 6.1/2" Pro-Torq engineering combination pliers
Features and Benefits
• High grip dual material handles
• Magnetic tips screwdrivers with chrome vanadium steel blades and a hanging hole
• Chrome vanadium steel pliers with double polished heads
• All tools are VDE approved
Typical Applications
• Inserting various sizes of fasteners
• Gripping, twisting and cutting wire
Contents
• Screwdrivers:
• Crosspoint: No.0 x 60mm, No.1 x 80mm, No.2 x 100mm
• Parallel: 2.5 x 75mm, 4.0 x 100mm, 5.5 x 125mm, 6.5 x 150mm
• Pliers:
• 6.3/8" Pro-Torq snipe nose pliers
• 6.1/4" Pro-Torq grip nipper pliers
• 6.1/2" Pro-Torq engineering combination pliers
Download
Produk Lainnya
Linesman Pliers
Serrated jaws for gripping nuts, bolts, studs etc. with side cutter and slip guard
safety handles.
Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Beryllium Copper are manufactured to 30-10HRC and offer a breaking strain of 1117 N/m - 1236 N/m. Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark resistant properties, is essential.
Serrated jaws for gripping nuts, bolts, studs etc. with side cutter and slip guard
safety handles.
Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Beryllium Copper are manufactured to 30-10HRC and offer a breaking strain of 1117 N/m - 1236 N/m. Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark resistant properties, is essential.
These aviation snips have the ability to cuts straight, left or right. Possessing a self-opening action for fast, effortless feed, with a built-in convenient, protective safety latch. Manufactured from drop forged chrome vanadium ground steel with a hardness of 54 - 58HRc. The double fulcrum compound action amplifies the pressure applied for easier cutting of up to 1.2mm cold rolled steel sheet. Completed by anti-slip guards, thumb lock and a spring loaded self-opening action for one handed operation.
Features and Benefits
• Anti slip guards for extra protection from slippage
• Thumb lock to secure the jaws when not in use
• Drop forged chrome vanadium steel blades to hold a good cutting edge even over time
• Spring loaded, self opening action to allow for effortless feed and single handed operation
• Double fulcrum allows for easier cutting of even 1.2mm steel
Typical Applications
• For use on mild steels and other non-ferrous materials
Features and Benefits
• Anti slip guards for extra protection from slippage
• Thumb lock to secure the jaws when not in use
• Drop forged chrome vanadium steel blades to hold a good cutting edge even over time
• Spring loaded, self opening action to allow for effortless feed and single handed operation
• Double fulcrum allows for easier cutting of even 1.2mm steel
Typical Applications
• For use on mild steels and other non-ferrous materials
This range of measuring tapes possess a non-reflective steel tape with nylon coated blade for maximum durability. The tape is housed in a high impact ABS plastic case with flush winding handle and belt clip. For ease of use, the tape is finished off with a handy plastic loop and metal end hook. Available in two lengths to suit your needs.
Features and Benefits
• High impact ABS plastic casing effectively protects the blade and can withstand regular punishment
• Flush winding handle allows you to safely guide the blade back into the housing with minimal risk of injury
• Blades are constructed from steel with a nylon coating for optimum durability
• Available in two lengths to suit your requirements
• Belt clip allows you to attach the product to your person for ease of accessibility
• Plastic loop end makes measuring easier
Typical Applications
• DIY
• Woodworking
• Construction
Features and Benefits
• High impact ABS plastic casing effectively protects the blade and can withstand regular punishment
• Flush winding handle allows you to safely guide the blade back into the housing with minimal risk of injury
• Blades are constructed from steel with a nylon coating for optimum durability
• Available in two lengths to suit your requirements
• Belt clip allows you to attach the product to your person for ease of accessibility
• Plastic loop end makes measuring easier
Typical Applications
• DIY
• Woodworking
• Construction
This fork is ergonomically designed for comfortable planting, cultivating, weeding and seeding. The epoxy coated carbon steel head and varnished wooden handle will provide long lasting durability.
Weeding fork: 285 x 80mm.
Weeding fork: 285 x 80mm.