Tools & Chemicals
Kennedy 10-65mm Sprung Circlip Plier Set 4 Piece, Internal & External
Supplied in a moulded plastic carry case, this set of 4 circlip pliers is the ideal product for the removal and insertion of circlips. Manufactured from specially selected steels combined with a dual material grip handle design allows the user to apply the greatest force with the minimum amount of effort. Finished with a double polished head, joint and an induction hardened cutting edge. Features pliers for both external and internal circlips.
Features and Benefits
• Supplied in a plastic moulded carry case for ease of storage, organisation and transportation of your tools
• 4 piece set ensures you always have the correct set of circlip pliers no matter the application
• Handles have a polypropylene core for strength and durability with a soft thermoplastic outer for non-slip comfort grip
• Pliers are manufactured from specially selected steels designed for strength
• Double polished head and joint to repel dirt
• Induction-hardened cutting edges that hold over time even with frequent use
Contents
• External straight jaw, 10 - 25mm and 19 - 40mm
• Internal straight jaw, 10 - 25mm and 12 - 65mm
Typical Applications
• Used to remove and insert both external and internal circlips which are commonly used in the automotive industry as well as being suitable for production line environments where repetitive work is undertaken
Features and Benefits
• Supplied in a plastic moulded carry case for ease of storage, organisation and transportation of your tools
• 4 piece set ensures you always have the correct set of circlip pliers no matter the application
• Handles have a polypropylene core for strength and durability with a soft thermoplastic outer for non-slip comfort grip
• Pliers are manufactured from specially selected steels designed for strength
• Double polished head and joint to repel dirt
• Induction-hardened cutting edges that hold over time even with frequent use
Contents
• External straight jaw, 10 - 25mm and 19 - 40mm
• Internal straight jaw, 10 - 25mm and 12 - 65mm
Typical Applications
• Used to remove and insert both external and internal circlips which are commonly used in the automotive industry as well as being suitable for production line environments where repetitive work is undertaken
Download
Produk Lainnya
Manufactured from forged and hardened steel, these ring slogging spanners also possess machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners, the product is available in a variety of metric sizes to ensure you find the correct size for your needs.
Features and Benefits
• Forged steel construction makes for a durable product
• Flat striking faces enable the product to be struck with a hammer if needed
• Corrosion-resistant finish bolsters product longevity
• Available in an array of sizes to suit varying specifications
Typical Applications
• Automotive
• Construction
• Plumbing
Standards
• Conforms to DIN 7444
Features and Benefits
• Forged steel construction makes for a durable product
• Flat striking faces enable the product to be struck with a hammer if needed
• Corrosion-resistant finish bolsters product longevity
• Available in an array of sizes to suit varying specifications
Typical Applications
• Automotive
• Construction
• Plumbing
Standards
• Conforms to DIN 7444
All Kennedy® screwdriver bits have a hardness of 58 - 62HRC and these 1/4in. hex Torq® bits are manufactured from high alloy chrome molybdenum steel for use on hand and power tools. Available in a range of sizes.
Features and Benefits
• Hardness of 58-62HRC for resilience
• Suitable to use with hand and power tools for versatility of use
• Manufactured from chrome molybdenum steel making for a robust product
• Available in a range of sizes to suit your exact needs
Typical Applications
• DIY
• Construction
• Electrical
Features and Benefits
• Hardness of 58-62HRC for resilience
• Suitable to use with hand and power tools for versatility of use
• Manufactured from chrome molybdenum steel making for a robust product
• Available in a range of sizes to suit your exact needs
Typical Applications
• DIY
• Construction
• Electrical
Available in three sizes, this range of 1000V Insulated Combination Pliers are especially suitable for production line environments where repetitive work is undertaken. All tools possess a double polished head and joint with induction hardened cutting edges and possess thermoplastic handles for comfort and protection.
Features and Benefits
• Insulated to protect up to 1000V to ensure maximum safety
• Available in three varying sizes to suit your requirements
• Induction hardened cutting edges ensure precision cuts every time
• Double polished head and joints repel dirt and grime for an easy tool clean
Typical Applications
• Electrical
• DIY
• Construction
Standards
• DIN EN IEC 60900
Features and Benefits
• Insulated to protect up to 1000V to ensure maximum safety
• Available in three varying sizes to suit your requirements
• Induction hardened cutting edges ensure precision cuts every time
• Double polished head and joints repel dirt and grime for an easy tool clean
Typical Applications
• Electrical
• DIY
• Construction
Standards
• DIN EN IEC 60900
Product Details
With two screw on all-purpose hard nylon faces, this range of hammers are well suited for light to heavy duty applications. Fitted with a chrome plated head and a fully moulded polypropylene shaft with soft feel dual material grip, these hammers balance quality, comfort and efficiency. Available in varying face diameters to suit your needs.
Features and Benefits
• Soft feel dual material grip ensures comfort whilst using as well as improving grip
• Chrome plated head protects from corrosion
• Two nylon striking faces provide strong blows without marking your workpiece
• Polypropylene handle and shaft for durability
• Faces can be replaced to ensure your tool is always working at an optimum level
Typical Applications
• Ideal for both light and heavy duty applications in jewellery making, engineering, construction or any other applications where a heavy blow is needed without marking the workpiece
With two screw on all-purpose hard nylon faces, this range of hammers are well suited for light to heavy duty applications. Fitted with a chrome plated head and a fully moulded polypropylene shaft with soft feel dual material grip, these hammers balance quality, comfort and efficiency. Available in varying face diameters to suit your needs.
Features and Benefits
• Soft feel dual material grip ensures comfort whilst using as well as improving grip
• Chrome plated head protects from corrosion
• Two nylon striking faces provide strong blows without marking your workpiece
• Polypropylene handle and shaft for durability
• Faces can be replaced to ensure your tool is always working at an optimum level
Typical Applications
• Ideal for both light and heavy duty applications in jewellery making, engineering, construction or any other applications where a heavy blow is needed without marking the workpiece