Storage & Handling
Kennedy-Pro Tool Chest, Classic Range - Extra Wide, Red, 12 Drawers, (H) 490mm x (W) 445mm x (L) 690mm
This 12 Drawer tool chest is manufactured from heavy gauge steel with an electro-coated enamel finish for superior appearance and protection. Possessing steel panels in the drawers for extra rigidity, ball bearing drawer runners and drawer liners and top mat. Fully lockable, the product is finished in a red epoxy coat paint.
Features and Benefits
• Manufactured in heavy gauge steel for maximum durability
• Fully locking to effectively secure your tools
• Double wall construction side panels create reinforcement in areas that need it the most
• Welded joints for added rigidity and overall product longevity
• Coated in a hard wearing epoxy powder for resistance against corrosion as well as more general wear and tear
• Fully opening drawers for extra accessibility
• Quick release smooth running ball bearing drawer slides allow easy opening and closing of the drawers
• Double sliders on base drawer
• Supplied with top mat and drawer liners to protect the chest construction
Contents
• (1x) 280 x 410 x 100mm drawer dimensions
• (1x) 590 x 410 x 100mm drawer dimensions
• (2x) 590 x 410 x 50mm drawer dimensions
• (8x) 125 x 410 x 50mm drawer dimensions
Typical Applications
• Warehousing
• Garages
• Workshops
Features and Benefits
• Manufactured in heavy gauge steel for maximum durability
• Fully locking to effectively secure your tools
• Double wall construction side panels create reinforcement in areas that need it the most
• Welded joints for added rigidity and overall product longevity
• Coated in a hard wearing epoxy powder for resistance against corrosion as well as more general wear and tear
• Fully opening drawers for extra accessibility
• Quick release smooth running ball bearing drawer slides allow easy opening and closing of the drawers
• Double sliders on base drawer
• Supplied with top mat and drawer liners to protect the chest construction
Contents
• (1x) 280 x 410 x 100mm drawer dimensions
• (1x) 590 x 410 x 100mm drawer dimensions
• (2x) 590 x 410 x 50mm drawer dimensions
• (8x) 125 x 410 x 50mm drawer dimensions
Typical Applications
• Warehousing
• Garages
• Workshops
Download
Produk Lainnya
A quick and easy solution to contain spills. Contains spills in the bund.
Heavy duty rotational moulded IBC spill pallets for single or double IBC storage applications. 100% polyethylene construction, corrosion resistant and with removable decking to assist cleaning they are suitable for most IBC footprints. Forklift pockets for ease of positioning and moving empty units. Please check the technical data sheet below to learn the weight capacity for each product.
Features and Benefits
-Made from polyethylene
-Fitted with grids
-It has base fork pockets
-Reusable
-Corrosion Resistant
-Grids to help with the upstand support
-Fork pockets which allow easy access when unloading/loading or moving the item.
-Compact, lightweight and strong
Notes
• Drums not included
Heavy duty rotational moulded IBC spill pallets for single or double IBC storage applications. 100% polyethylene construction, corrosion resistant and with removable decking to assist cleaning they are suitable for most IBC footprints. Forklift pockets for ease of positioning and moving empty units. Please check the technical data sheet below to learn the weight capacity for each product.
Features and Benefits
-Made from polyethylene
-Fitted with grids
-It has base fork pockets
-Reusable
-Corrosion Resistant
-Grids to help with the upstand support
-Fork pockets which allow easy access when unloading/loading or moving the item.
-Compact, lightweight and strong
Notes
• Drums not included
Hand loaded, widespan heavy duty shelving system.
Unrestricted shelf levels allow for easy access.
Easy to install and adjust.
Bays are 1800mm and 2100mm high, supplied with 3 shelf levels.
Graphite grey steel uprights with galvatite braces and light grey beams.
Contains 2 frames (1 in an extension bay), feet, 3 pairs of beams, locking clips, decking material and where applicable wire beam ties.
Bolt free construction for simple, rapid assembly
Longspan Shelving Starter and Extension bays make ordering easy. To create a run just order a Starter Bay and the correct number of Extension Bays
It is essential that shelving exceeding a height to depth ratio of 4:1 to the top loaded shelf is adequately secured to the floor, fixings available, please ask
Bolt free construction for simple, rapid assembly
Steel decks add greater strength and rigidity
Contents not included.
UK Manufactured
Images are for illustration purposes only
Unrestricted shelf levels allow for easy access.
Easy to install and adjust.
Bays are 1800mm and 2100mm high, supplied with 3 shelf levels.
Graphite grey steel uprights with galvatite braces and light grey beams.
Contains 2 frames (1 in an extension bay), feet, 3 pairs of beams, locking clips, decking material and where applicable wire beam ties.
Bolt free construction for simple, rapid assembly
Longspan Shelving Starter and Extension bays make ordering easy. To create a run just order a Starter Bay and the correct number of Extension Bays
It is essential that shelving exceeding a height to depth ratio of 4:1 to the top loaded shelf is adequately secured to the floor, fixings available, please ask
Bolt free construction for simple, rapid assembly
Steel decks add greater strength and rigidity
Contents not included.
UK Manufactured
Images are for illustration purposes only
A quick and easy solution to contain spills. Contains spills in the bund.
Heavy duty rotational moulded IBC spill pallets for single or double IBC storage applications. 100% polyethylene construction, corrosion resistant and with removable decking to assist cleaning they are suitable for most IBC footprints. Forklift pockets for ease of positioning and moving empty units. Please check the technical data sheet below to learn the weight capacity for each product.
Features and Benefits
-Made from polyethylene
-Fitted with grids
-It has base fork pockets
-Reusable
-Corrosion Resistant
-Grids to help with the upstand support
-Fork pockets which allow easy access when unloading/loading or moving the item.
-Compact, lightweight and strong
Notes
• Drums not included
Heavy duty rotational moulded IBC spill pallets for single or double IBC storage applications. 100% polyethylene construction, corrosion resistant and with removable decking to assist cleaning they are suitable for most IBC footprints. Forklift pockets for ease of positioning and moving empty units. Please check the technical data sheet below to learn the weight capacity for each product.
Features and Benefits
-Made from polyethylene
-Fitted with grids
-It has base fork pockets
-Reusable
-Corrosion Resistant
-Grids to help with the upstand support
-Fork pockets which allow easy access when unloading/loading or moving the item.
-Compact, lightweight and strong
Notes
• Drums not included
These 5 Shelf quick assembly units are ideal for industrial or institutional use. Quick and easy to erect with no nuts or bolts necessary, the product is available with either 175kg (chipboard) or 265kg (MDF) shelf capacities. Tested and certified to European GS standards, each product is complete with 5 shelves with strong uprights and beam profiles, finished in high quality epoxy powder coated paint.
Features and Benefits
• Each product possesses 5 shelves to ensure ample storage space
• Available in varying sizes with either MDF shelves with 265kg capacity or Chipboard shelves with 175kg capacities
• Quick assembly design includes no nuts or bolts for user ease
• Finished in epoxy powder coat paint for bolstered resistance to corrosion and aesthetic pleasure
• Strong uprights and beam profiles make for a robust product
Typical Applications
• Institutional
• Workshops
• Industrial
Standards
• Tested and certified to European GS standards
Features and Benefits
• Each product possesses 5 shelves to ensure ample storage space
• Available in varying sizes with either MDF shelves with 265kg capacity or Chipboard shelves with 175kg capacities
• Quick assembly design includes no nuts or bolts for user ease
• Finished in epoxy powder coat paint for bolstered resistance to corrosion and aesthetic pleasure
• Strong uprights and beam profiles make for a robust product
Typical Applications
• Institutional
• Workshops
• Industrial
Standards
• Tested and certified to European GS standards