Drager X-zone® 5500

State-of-the-art area monitoring – the Dräger X-zone® 5500 in combination with the Dräger X-am® 5000 or 5600 gas detection instruments can be used for the measurement of up to six gases and extends the portable gas detection technology to a comprehensive system with many applications.

Area monitor
in combination with the Dräger X-am® 5000 or 5600 gas measuring devices, is suitable to measure 1 to 6 gases
limitless area monitoring thanks to fenceline of up to 25 devices

Innovative area monitoring
The Dräger X‑zone 5500 transforms the Dräger personal gas detection instruments X‑am 5000 and 5600 into innovative area monitoring devices for a wide range of applications. An outstanding combination for increased safety – in addition to the personal air monitors carried on the body, these area monitors are positioned where gas hazards are expected.

Clear warning
Even from a distance, the illuminated green LED ring indicates that the air is free of toxic and combustible gases. Upon detection of gas hazards, the LED color changes from green to red, thus providing a clear visual warning that gas is present. Additionally, a loud and highly audible evacuation alarm is emitted. The Dräger X-zone 5500 gas entry location permits gas to diffuse into the Dräger X-am 5000 or 5600 from all sides.

Wireless fenceline
Up to 25 Dräger X-zone 5500 can be automatically interconnected to form a wireless fenceline. The interconnection of the area monitoring devices allows for rapid establishment of safety networks for larger areas.

A Dräger X-zone 5500 detecting a gas alarm transmits the alarm signal to all interconnected units. A red flashing master alarm in the unit detecting the gas contrasts with red/green flashing alarms of the connected units. This provides simple recognition of alarm status and the actual location of the hazard.

With the corresponding configuration, the maximum gas concentration in the monitored area is shown on the display. Combined with the display of the X-zone ID a clear containment of the hazard area is possible.

Continuous operation for up to 120 hours
The 24 Ah battery of the Dräger X-zone 5500 provides up to 120 hours of continuous operation – up to a complete working week.

Data interface modbus
Integration in a control room system
Connection to external displays

Other benefits
360°-gas entry
Approval for Ex-Zone 0
daily function test and calibration not required after single on-site testing
individually configurable with the Dräger CC-Vision PC software (e.g. alarm frequency)
inductive charging station: easy and convenient non-contact charging

Download

Produk Lainnya

Summitech BF4 BL(LC)

PRODUCT CODE : BF4 BL(LC)
COATING MATERIAL : Nitrile
LINEAR MATERIAL : Cotton Interlock
EXTERIOR FINISHING : Granular
CUFF STYLE : Extended sleeve with elastic edge
THICKNESS MM : N/A
LENGTH MM : 650mm ± 30mm
COLOUR : Blue
SIZE/WRIST : 9/L, 10/XL
PACKAGING : Bulk packed 12 pairs in a bundle 72 pairs in a master carton

3M 9202 KS

• 39 inch PVC Rubber Boots
• Cotton lining for greater comfort
• With nail-proof steel midsole

Drager accuro

Fast measurement with one hand: The Dräger-Tube pump accuro allows you to use the established Dräger-Tubes to take measurements under extreme conditions. The easy-to-use Dräger-Tubes have already been calibrated and form a perfect unit with the Dräger-Tube pump.

Halo Safety Helmet With 6 Point Harness, White, ABS, Vented, Reduced Peak, Includes Side Slots

These C6 ABS 6 Point Harness Helmets from the Halo® PPE range have been designed with comfort and performance in mind. Halo® products are manufactured to suit a diverse workforce, and ensure everyone is protected. By choosing Halo® you are supporting worthwhile charities including Mind for Mental Health and The Diversity Trust. Where possible, single-use plastic bags have been removed from Halo® packaging to reduce our impact on landfill and on the environment.

The Halo® range of short peak side vented safety helmets have been designed with comfort and performance in mind. Available in a range of colours, each safety helmet is manufactured from ABS plastic with a 6-point textile suspension harness and fleece sweatband.

Both practical and stylish, these helmets are designed to protect personnel whilst on site. Each helmet also includes a rain gutter and slots for hearing or eye protection accessories.

Features and Benefits
• 6-point textile suspension harness for comfortable wear
• Washable fleece sweatband keeps sweat out of the eyes and off the face
• Manufactured from ABS plastic for resilience and product longevity
• 12 ventilation holes maintain airflow and wearer comfort
• Ratchet adjustable headband for easy fitting
• 4-point self-releasing chin strap mounts for optionally secured fitting
• Slots (30mm) for hearing or eye protection accessories
• Rain gutter prevents the collection and draining of water onto the wearer
• German manufactured for a lower carbon footprint
• Available in a range of colours to suit your needs

Standards
• Halo® products are BSI tested
• EN 397:2012 + A1:2012

Drager X-zone® 5500

Informasi Pemesanan