Safety & PPE
ISC Tango® TX2 Two-Gas Monitor
Protect workers, reduce false alarms, and spend less time managing your gas detector fleet with the Tango TX2 Two-Gas Monitor. Unlike other two-gas monitors that use combination sensors, the Tango TX2 uses individual sensors to increase alarm accuracy so you can reduce unnecessary shutdowns and improve incident data quality.
Download
Produk Lainnya
- Continuous detection of toxic gases and oxygen in explosion hazardous area with flame proof structure
- Self diagnosis function with built-in Microprocessor
- Excellent selectivity by adapting detection principle only for toxic gases & oxygen
- Stable quality and proved detection principle for service life | Built-in back light LCD or OLED display
- Auto calibration and program setting with a magnet bar
- 2-stage alarm, 1-trouble display and relay contact output
- 4-20mA (Current source or Sink) output signal
- Easy configuration of monitoring system by RS-485 Modbus communication
- With the alarm unit - Normal : Green LED -Alarm : Red LED, Buzzer(95 dB)
- Trouble : Yellow LED
- Calibration and maintenance by one-man
- Superior performance for detecting gases below TLV
- Self diagnosis function with built-in Microprocessor
- Excellent selectivity by adapting detection principle only for toxic gases & oxygen
- Stable quality and proved detection principle for service life | Built-in back light LCD or OLED display
- Auto calibration and program setting with a magnet bar
- 2-stage alarm, 1-trouble display and relay contact output
- 4-20mA (Current source or Sink) output signal
- Easy configuration of monitoring system by RS-485 Modbus communication
- With the alarm unit - Normal : Green LED -Alarm : Red LED, Buzzer(95 dB)
- Trouble : Yellow LED
- Calibration and maintenance by one-man
- Superior performance for detecting gases below TLV
The MSA AirXpress 2 Fire is a simplistic, reliable and economical SCBA that meets the EN 137, Type II requirements for the fire service market and a variety of related applications. The AirXpress 2 Fire is rugged and reliable with customizable configurations depending on your needs. This Self-Contained Breathing Apparatus boasts a new, modern design and the easy-to-maintain construction provides low cost of ownership.
The new AX demand valve provides an adjustable flow rate and an optional manual bypass function. Zippers on shoulder harnesses allow for switching of pressure gauge and demand valve from one side to another. All the added features of the AirXpress 2 Fire are ideal for extreme working conditions (heavy breathing environments) and increased overall user safety.
The new AX demand valve provides an adjustable flow rate and an optional manual bypass function. Zippers on shoulder harnesses allow for switching of pressure gauge and demand valve from one side to another. All the added features of the AirXpress 2 Fire are ideal for extreme working conditions (heavy breathing environments) and increased overall user safety.
The Dräger Bodyguard® 7000 is an electronic monitoring unit which provides continuous monitoring of personal information and operational status of the Dräger PSS® 7000 and PSS® 5000 self contained breathing apparatus.