Drager PARAT® Filtering Escape Hoods

The PARAT® filtering escape hoods were developed with users, placing the focus on the fastest possible escape. Optimized operation and wearing comfort, a robust case and a sealed filter ensure protection from toxic industrial and/or fire-related gases, vapours and particles for at least 15 minutes.

Ready for escape in only 3 steps
Exceptionally innovative and intuitive: When opening the soft pack or hard case packaging, the filter plug is automatically released from the filter. The filter is then deployed into operational position and the hood can be immediately donned. Thanks to the self-adjusting internal head harness, no additional adjustment is required. All you have to do is open the packaging, remove and don the hood – and leave the danger zone.

Reliable protection
Choose from fire escape, industrial escape or a combination of fire and industrial escape. The high-performance combination filter reliably protects against a wide range of fire and/or toxic industrial gases, vapours and particles - depending on the version. The filters are approved according to the EN standard 403:2004 for fire escape hoods and/or the DIN standard 58647-7 for industrial filtering escape devices. Additionally, the industrial versions are tested in accordance with the EN standard 14387:2004 for gas and combined filters.

To keep the filter safe over its long lifetime, it is tightly sealed with two filter plugs.

16 years of service life
Replacing the filter after eight years will extend the service life of the Dräger PARAT Escape Hood to 16 years in total. For this, Dräger offers filter replacement service or expert training for your employees.

Robust and ergonomic
Both ergonomics and wearing comfort were considered when designing the soft pack and hard case packaging of the Dräger PARAT Escape Hoods. The escape hood can be carried with a belt, shoulder strap, grip clip or belt clip. The PARAT Hard Case can also be mounted on the wall using a wallholder. Additionally, the robust packaging of the Dräger PARAT Escape Hoods protects the device from damage.

Different packaging types
You can select between different packaging types: The hard case provides splash water protection (IP54) – the soft pack provides ingress dust protection (IP5). Both packaging types have a viewing window to check the filter expiration date and the condition of the device. Particularly convenient: The security seal on the packaging shows if the unit has been opened.

For the PARAT fire escape hoods, two additional packaging options are available. The PARAT 5550 fire pouch in a flame retardant holster is the only fire escape hood approved together with (Dräger) breathing apparatusses. Alternatively, the PARAT 5510 single pack in a compact cardboard box and with a standard filter plug system needs little space to store on a fire vehicle.

Download

Produk Lainnya

Drager X-plore® 6530

The full face mask Dräger X-plore® 6530 is the successor to the Panorama Nova® RA masks, meeting the highest demands for quality, reliability and secure fit. The mask body made from EPDM is highly resistant and skin-friendly, offering high wearing comfort.

ISC Tango® TX2 Two-Gas Monitor

Protect workers, reduce false alarms, and spend less time managing your gas detector fleet with the Tango TX2 Two-Gas Monitor. Unlike other two-gas monitors that use combination sensors, the Tango TX2 uses individual sensors to increase alarm accuracy so you can reduce unnecessary shutdowns and improve incident data quality.

MSA AirXpress 2 Fire

The MSA AirXpress 2 Fire is a simplistic, reliable and economical SCBA that meets the EN 137, Type II requirements for the fire service market and a variety of related applications. The AirXpress 2 Fire is rugged and reliable with customizable configurations depending on your needs. This Self-Contained Breathing Apparatus boasts a new, modern design and the easy-to-maintain construction provides low cost of ownership.

The new AX demand valve provides an adjustable flow rate and an optional manual bypass function. Zippers on shoulder harnesses allow for switching of pressure gauge and demand valve from one side to another. All the added features of the AirXpress 2 Fire are ideal for extreme working conditions (heavy breathing environments) and increased overall user safety.

Drager GS3

Locating leaks often proves to be very demanding due to locations that are difficult to access. This is where the Dräger GS3 leakage detector comes in: as it is no larger than a ballpoint pen, even hard-to-reach places are no problem. The detector for flammable gases such as natural gas, liquefied petroleum gas and hydrogen detects even the smallest of leaks, indicated by a visual and acoustic alarm signal.

Drager PARAT® Filtering Escape Hoods

Informasi Pemesanan