Safety & PPE
Gastron Intelligent Diffusion Oxygen & Toxic Gas Detector / GTD-3000Tx
- Continuous detection of toxic gases and oxygen in explosion hazardous area with flame proof structure
- Self diagnosis function with built-in Microprocessor
- Excellent selectivity by adapting detection principle only for toxic gases & oxygen
- Stable quality and proved detection principle for service life | Built-in back light LCD or OLED display
- Auto calibration and program setting with a magnet bar
- 2-stage alarm, 1-trouble display and relay contact output
- 4-20mA (Current source or Sink) output signal
- Easy configuration of monitoring system by RS-485 Modbus communication
- With the alarm unit - Normal : Green LED -Alarm : Red LED, Buzzer(95 dB)
- Trouble : Yellow LED
- Calibration and maintenance by one-man
- Superior performance for detecting gases below TLV
- Self diagnosis function with built-in Microprocessor
- Excellent selectivity by adapting detection principle only for toxic gases & oxygen
- Stable quality and proved detection principle for service life | Built-in back light LCD or OLED display
- Auto calibration and program setting with a magnet bar
- 2-stage alarm, 1-trouble display and relay contact output
- 4-20mA (Current source or Sink) output signal
- Easy configuration of monitoring system by RS-485 Modbus communication
- With the alarm unit - Normal : Green LED -Alarm : Red LED, Buzzer(95 dB)
- Trouble : Yellow LED
- Calibration and maintenance by one-man
- Superior performance for detecting gases below TLV
Download
Produk Lainnya
Clearance measurement was never this easy and convenient: The 1 to 7 gas detector detects toxic and flammable gases as well as vapors and oxygen all at once – either in pump or diffusion mode. Innovative signaling design and handy assistant functions ensure complete safety throughout the process.
PRODUCT CODE : G D-F-09C
COATING MATERIAL : Nitrile
LINEAR MATERIAL : Flocklined
EXTERIOR FINISHING : Diamond
CUFF STYLE : Straight
THICKNESS MM : 0.46
LENGTH MM : 330
COLOUR : Green
SIZE/WRIST : 7, 8, 9, 10, 11
PACKAGING : Pair packed 12 pairs in a bundle 120 pairs in a master carton
COATING MATERIAL : Nitrile
LINEAR MATERIAL : Flocklined
EXTERIOR FINISHING : Diamond
CUFF STYLE : Straight
THICKNESS MM : 0.46
LENGTH MM : 330
COLOUR : Green
SIZE/WRIST : 7, 8, 9, 10, 11
PACKAGING : Pair packed 12 pairs in a bundle 120 pairs in a master carton
These C6 ABS 6 Point Harness Helmets from the Halo® PPE range have been designed with comfort and performance in mind. Halo® products are manufactured to suit a diverse workforce, and ensure everyone is protected. By choosing Halo® you are supporting worthwhile charities including Mind for Mental Health and The Diversity Trust. Where possible, single-use plastic bags have been removed from Halo® packaging to reduce our impact on landfill and on the environment.
The Halo® range of short peak side vented safety helmets have been designed with comfort and performance in mind. Available in a range of colours, each safety helmet is manufactured from ABS plastic with a 6-point textile suspension harness and fleece sweatband.
Both practical and stylish, these helmets are designed to protect personnel whilst on site. Each helmet also includes a rain gutter and slots for hearing or eye protection accessories.
Features and Benefits
• 6-point textile suspension harness for comfortable wear
• Washable fleece sweatband keeps sweat out of the eyes and off the face
• Manufactured from ABS plastic for resilience and product longevity
• 12 ventilation holes maintain airflow and wearer comfort
• Ratchet adjustable headband for easy fitting
• 4-point self-releasing chin strap mounts for optionally secured fitting
• Slots (30mm) for hearing or eye protection accessories
• Rain gutter prevents the collection and draining of water onto the wearer
• German manufactured for a lower carbon footprint
• Available in a range of colours to suit your needs
Standards
• Halo® products are BSI tested
• EN 397:2012 + A1:2012
The Halo® range of short peak side vented safety helmets have been designed with comfort and performance in mind. Available in a range of colours, each safety helmet is manufactured from ABS plastic with a 6-point textile suspension harness and fleece sweatband.
Both practical and stylish, these helmets are designed to protect personnel whilst on site. Each helmet also includes a rain gutter and slots for hearing or eye protection accessories.
Features and Benefits
• 6-point textile suspension harness for comfortable wear
• Washable fleece sweatband keeps sweat out of the eyes and off the face
• Manufactured from ABS plastic for resilience and product longevity
• 12 ventilation holes maintain airflow and wearer comfort
• Ratchet adjustable headband for easy fitting
• 4-point self-releasing chin strap mounts for optionally secured fitting
• Slots (30mm) for hearing or eye protection accessories
• Rain gutter prevents the collection and draining of water onto the wearer
• German manufactured for a lower carbon footprint
• Available in a range of colours to suit your needs
Standards
• Halo® products are BSI tested
• EN 397:2012 + A1:2012
One of the many benefits of the FPS® 7000 Facemask is the option of fitting a head up display. Always within the field of view the head up display allows easy monitoring of the cylinder contents without any manual action by the wearer.