Safety & PPE
Gastron Explosion Proof Type Diffusion Infrared Gas Detector / GIR-3000
- Continuous detection of flammable, CO2, CO and N2O gases in explosion hazardous area with flame proof structure
- State-of-the art infrared detection principle
- Long service life time (more than 5 years)
- Operation in non oxygen environment
- Self diagnosis function with built-in Microprocessor
- Fast response time(<5 sec)
- Built-in back light LCD or OLED display
- Auto calibration and program setting with a magnet bar
- 2-stage alarm, 1-trouble display and relay contact output
- 4-20mA (Current source or Sink) output signal
- Easy configuration of monitoring system by RS-485 Modbus or HART communication
- Calibration and maintenance by one-man
- With the alarm unit (GTL-100)
- Normal : Green LED
- Alarm : Red LED, Buzzer (95dB)
- Trouble : Yellow LED
- State-of-the art infrared detection principle
- Long service life time (more than 5 years)
- Operation in non oxygen environment
- Self diagnosis function with built-in Microprocessor
- Fast response time(<5 sec)
- Built-in back light LCD or OLED display
- Auto calibration and program setting with a magnet bar
- 2-stage alarm, 1-trouble display and relay contact output
- 4-20mA (Current source or Sink) output signal
- Easy configuration of monitoring system by RS-485 Modbus or HART communication
- Calibration and maintenance by one-man
- With the alarm unit (GTL-100)
- Normal : Green LED
- Alarm : Red LED, Buzzer (95dB)
- Trouble : Yellow LED
Download
Produk Lainnya
The Dräger Pac® 8500 single-gas detection device is a reliable and precise instrument even under the toughest of conditions. Measured data can easily be transmitted into the Dräger Gas Detection Connect system via Bluetooth®. The device can be equipped with a hydrogen-compensated CO sensor or a Dräger dual sensor. This gives you the option of measuring two gases at once: H2S with CO, H2S with O2 or O2 with CO.
The innovative Dräger X-act® 7000 analysis system consists of Dräger MicroTubes and an opto-electronic analysis device that lets you precisely measure gases in the low ppb range. It gives you precise results right on site, replacing slow, expensive lab analyses. It's extremely easy to use: insert the Dräger MicroTubes, start measuring, then read out the test result.
These nitrile coated gloves are ideal for use in high risk areas. Possessing a nitrile coated palm, a 13 gauge HPPE liner, additional support in the thumb crotch area and an elasticated cuff, the gloves are available to purchase in a range of sizes. Finished in a grey colour with a black palm,
Features and Benefits
• The nitrile palm coating provides excellent grip when handling oily or greasy components
• Additional thumb crotch support provides extra protection in high wear areas
• Available in a variety of sizes to suit your needs
• Elasticated cuff provides a snug fit whilst ensuring dexterity
Typical Applications
• High risk applications
• Oil industry
Standards
• EN420:2003+A1:2009
• EN 388:2016 4.X.4.2.D.
• Dexterity level: 5
Features and Benefits
• The nitrile palm coating provides excellent grip when handling oily or greasy components
• Additional thumb crotch support provides extra protection in high wear areas
• Available in a variety of sizes to suit your needs
• Elasticated cuff provides a snug fit whilst ensuring dexterity
Typical Applications
• High risk applications
• Oil industry
Standards
• EN420:2003+A1:2009
• EN 388:2016 4.X.4.2.D.
• Dexterity level: 5