Safety & PPE
Halo Corded PU Earplugs, Yellow, 34db, Box of 200 Pairs, EN 352-2
These Yellow PU Ear Plugs from the Halo® PPE range have been designed with comfort and performance in mind. Halo® products are manufactured to suit a diverse workforce, and ensure everyone is protected. By choosing Halo® you are supporting worthwhile charities including Mind for Mental Health and The Diversity Trust. Where possible, single-use plastic bags have been removed from Halo® packaging to reduce our impact on landfill and on the environment.
These disposable ear plugs deliver comfortable hearing protection without impairing normal communication. The tapered design makes for easy fitting and forms an excellent seal.
Features and Benefits
• Soft PU foam is comfortable in the ear canal
• Tapered design ensures an easy fit and a tight, protective seal
• Slowly expands after insertion to help keep the ear plugs in place
• Supplied as a pack of 200 pairs to ensure you have an ample amount for all personnel
• Available in both corded and uncorded designs to suit your needs
Standards
• Halo® products are BSI tested
• EN 352-2:2002
• CAT III
These disposable ear plugs deliver comfortable hearing protection without impairing normal communication. The tapered design makes for easy fitting and forms an excellent seal.
Features and Benefits
• Soft PU foam is comfortable in the ear canal
• Tapered design ensures an easy fit and a tight, protective seal
• Slowly expands after insertion to help keep the ear plugs in place
• Supplied as a pack of 200 pairs to ensure you have an ample amount for all personnel
• Available in both corded and uncorded designs to suit your needs
Standards
• Halo® products are BSI tested
• EN 352-2:2002
• CAT III
Download
Produk Lainnya
- Continuous detection of toxic gases and oxygen in explosion hazardous area with flame proof structure
- Self diagnosis function with built-in Microprocessor
- Excellent selectivity by adapting detection principle only for toxic gases & oxygen
- Stable quality and proved detection principle for service life | Built-in back light LCD or OLED display
- Auto calibration and program setting with a magnet bar
- 2-stage alarm, 1-trouble display and relay contact output
- 4-20mA (Current source or Sink) output signal
- Easy configuration of monitoring system by RS-485 Modbus communication
- With the alarm unit - Normal : Green LED -Alarm : Red LED, Buzzer(95 dB)
- Trouble : Yellow LED
- Calibration and maintenance by one-man
- Superior performance for detecting gases below TLV
- Self diagnosis function with built-in Microprocessor
- Excellent selectivity by adapting detection principle only for toxic gases & oxygen
- Stable quality and proved detection principle for service life | Built-in back light LCD or OLED display
- Auto calibration and program setting with a magnet bar
- 2-stage alarm, 1-trouble display and relay contact output
- 4-20mA (Current source or Sink) output signal
- Easy configuration of monitoring system by RS-485 Modbus communication
- With the alarm unit - Normal : Green LED -Alarm : Red LED, Buzzer(95 dB)
- Trouble : Yellow LED
- Calibration and maintenance by one-man
- Superior performance for detecting gases below TLV
Available in a range of sizes, these polyurethane coated gloves are ideal for use in high risk areas. The gloves possess a 13 gauge cut E liner, additional tumb crotch support and an elasticated cuff.
Features and Benefits
• The PU palm coating provides excellent dexterity and grip when handling dry components
• 13 gauge cut E liner to protect against minor cuts
• Additional thumb crotch support provides extra protection in high wear areas
• Available in a range of sizes to suit your needs
• Elasticated cuffs to ensure a positive fit
Typical Applications
• High risk applications
• Handling
Standards
• EN420:2003+A1:2009
• EN388:2016 4.X.4.3.E
• Dexterity level: 5
Features and Benefits
• The PU palm coating provides excellent dexterity and grip when handling dry components
• 13 gauge cut E liner to protect against minor cuts
• Additional thumb crotch support provides extra protection in high wear areas
• Available in a range of sizes to suit your needs
• Elasticated cuffs to ensure a positive fit
Typical Applications
• High risk applications
• Handling
Standards
• EN420:2003+A1:2009
• EN388:2016 4.X.4.3.E
• Dexterity level: 5
The Dräger SPC 2400 is a reusable suit, which is reliable in protecting you from liquids and dust. The suit is available in a specially robust version made of PVC or as a light, water vapour permeable version made of flexothane.
Protect the hands when handling greasy and oily components with Red Cut 1 safety gloves from Tuffsafe®. Colour-coded to indicate their medium protection level (level 1), these lightweight, breathable gloves offer excellent grip thanks to the nitrile foam palm coating.
Features and Benefits
• Seamless design to avoid skin irritation during prolonged use
• Knitted elasticated cuff for a secure fit
• Flexible to maintain dexterity
Standards
• CAT II
• EN388 4.1.2.1.
Warnings
• Not suitable for use in areas with a cut risk
Notes
• 13 gauge
Features and Benefits
• Seamless design to avoid skin irritation during prolonged use
• Knitted elasticated cuff for a secure fit
• Flexible to maintain dexterity
Standards
• CAT II
• EN388 4.1.2.1.
Warnings
• Not suitable for use in areas with a cut risk
Notes
• 13 gauge