HILUBE

MORESCO-HILUBE, our high temperature lubricating oil, is used in harsh environments as the base oil of greases used with bearings subject to the high temperatures of automotive electrical components and as the lubricating oil used with bearings of machinery such as OA machinery, with bread ovens, and with the drive section of drying furnaces.

L-150 : Pale yellow High temperature region of ～270℃.For food machinery(tunnel oven), textile machinery(heat setter) and biaxial stretching machine(film tenter).
L-320 : Pale yellow High temperature region of ～270℃.For food machinery(tunnel oven), textile machinery(heat setter) and biaxial stretching machine(film tenter).
L-560 : Pale yellow High temperature region of ～270℃.For food machinery(tunnel oven), textile machinery(heat setter) and biaxial stretching machine(film tenter).
L-830 : Pale yellow High temperature region of ～270℃.For food machinery(tunnel oven), textile machinery(heat setter) and biaxial stretching machine(film tenter).

Suitable for lubricants, diesel and non-corrosive liquids, this lever pump is constructed from a zinc chrome finish steel and is completed with a telescopic suction tube. Suitable for container sizes 60 and 205 litres, the innlet on the pump is 2" BSP and M59 x 5 male thread.





Features and Benefits


• Manufactured from steel for durability


• Zinc chrome finish protects against corrosion and wear and tear


• Can be used with both 60 and 205 litre containers making it a versatile product


• Is compatible with non-corrosive liquids and most lubricants


• Telescopic suction tube allows you to adjust the tube to suit your desired container





Typical Applications


• Automotive


• Engineering

Hot dip strippable plastic coating moulds itself around the component or tool to provide 100% coverage and protect against corrosion and impacts for up to ten years. The protected component can be easily identified through the translucent coating. Simply removed by peeling it off, leaves behind a thin oil film to provide short term protection against corrosion. The removed protective dip can be reused.

Features and Benefits
• Easily moulds around tools and components
• Offers 100% coverage for effective protection against corrosion and impacts
• Long lasting protects for up to 10 years
• Components are easily identifiable thanks to the translucent coating
• Working temperature 130°C to 160°C (for optimum results 140°C to 145°C)
• Reusable for a cost effective solution

Notes
• Each block measures (L)-150mm (H)-50mm (W)-80mm.
• Block weight - 0.50kg

Warning
• Never directly apply heat to melt the protective dip, always use with a suitable melting pot.

Available to suit 25 or 205 litre containers, these syphon pumps are an efficient way of controlling and dispensing a host of fluids. Comprised of a flexible plastic outlet and semi-rigid inlet tubes, the hand pumping units incorporate one-way valves. Suited for use with petrol and diesel as well as with non-corrosive liquids. All tubes can be cut to length and are fitted with a threaded bung. Model SPS/25 has a squeeze action and models SPS/205 and SPH/205 have a plunger-type action.



Features and Benefits
• Tubes can be cut to your desired length to meet your requirements
• Suitable for use with petrol, diesel and all non-corrosive liquids
• Available to suit three sized containers
• Flexible nature allows you to manipulate the pump to your desired position

Typical Applications
• Engineering
• Aquatics
• Automotive