The CP721 Series 3/8" impact wrench offers a rocking dog mechanism and a metal motor housing for high durability and smooth operation. High productivity is ensured with a torque of 75 ft.lbs / 102 Nm while also being compact and comfortable to use.

IWS100X - 1" square drive. Suitable for industrial and commercial production and assembly applications. Side handle for two-handed operation. Top mounted spring balance loop. Easy to use forward/reverse switch and three position power regulator. Top venting exhaust. Oiling points for daily maintenance.

Bolt Capacity: M33
Working torque: 2,030 Nm
Maximum torque: 2,300Nm
Safe working pressure: 6.2bar / 90psi.
Air inlet thread: 1/2" NPT.
Minimum air hose size (ID): 1/2" (13mm).
Air pressure: 6.3bar/90 psi.
Air consumption: 7.0 cfm.
Sound pressure level: 96 dBA.
Sound power level: 101.67 dBA.
Vibration level: 6.0 m/s².
Overall length: 448mm.

The NS4030 straight air needle scaler is a heavy duty chipping hammer perfect for industrial and production applications.

Features and Benefits
• 10 needles for quick removal of rust, paint, scale, flux and corrosion
• Compact for great accessibility for hard to reach areas
• Slimline body for one hand operation
• Front exhaust helps remove debris and scale from the work area

Typical Applications
• Ideal for surface clean-up work
• Great for rust removal on chassis
• Quick removal of rust,paint, scale, weld flux and corrosion

Connector to Male Taper


Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.


Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.