M12 SLED-0 • Up to 640M Beam Distance • 3 Light Output Modes for Distance, Clarity, and Safety • High Mode: 750 lumens for up to 4 hours with M12™ 4.0Ah Pack
• Up to 640M Beam Distance • 3 Light Output Modes for Distance, Clarity, and Safety • High Mode: 750 lumens for up to 4 hours with M12™ 4.0Ah Pack • Low Mode: 400 lumens for up to 8 hours with M12™ 4.0Ah Pack • Impact Resistant • Moisture Resistant: IP54 rated for all weather use • TRUEVIEW™ High Definition output with true color, even beam and natural light
M12 UHL-0 • 1,350 lumens of TRUEVIEW™ High Definition output • MILWAUKEE"s FINISHGUARD™ hooks provide lasting protection against scratches to a vehicle"s finish • 2X more gripping surface for maximum hold
Air Circuit Breaker (ACB) is one type of electrical protection device commonly used in electrical systems. Air Circuit Breaker is an electrical protection device used to cut off the flow of electricity in an electrical circuit when there is a disturbance or excess current. This tool is generally used in industrial electrical panels and can be used in electrical systems with quite high voltage.
Air Circuit Breaker works by cutting off the flow of electricity in an electrical circuit when there is a disturbance or excess current. Air Circuit Breaker uses a special system consisting of several components, such as trip unit, operating mechanism, and current transformer. When there is a disturbance in an electrical circuit, the trip unit will detect excess current. Then, it gives a signal to the operating mechanism to cut off the flow of electricity in the circuit. After the electric current is cut off, Air Circuit Breaker will extinguish the arc that occurs using the arc extinguishing system that has been prepared.
The main function of Air Circuit Breaker is to protect electrical equipment and systems from damage due to over current or excess current, which usually occurs due to short circuit or overload.
Type of Luminaire : Street Light EVO Set Model No : NNP11740GL Type of Light Source : LED Power Input : 40W System Lumen Output : 5200 lm Power Voltage : 100-240V Power Factor : 0.90 Lifetime : 50000H(L70) CCT : 5000K CRI : 70 Input Frequency : 50/60Hz Dimming : 5 steps automatic dimming IP Rating : 66 Ambient Temperature : 5°C~40°C Dimensions : 732×212×109mm Body : ADC
M12 AL-0 • Five high performance LEDs provide 1000 Lumens of light output replacing 250 W halogen lights • Integrated magnets, clamping mechanism, and key hole for screws / nails provide multiple mounting options for different surfaces • 3 output modes for optimal brightness and runtime