When it comes to portable welders, the ESAB Rebel EMP 235ic is packed with the power to weld up to a half-inch on mild steel, measuring in at 235A at 20%. You have the ability to weld a wide range of metal thicknesses and applications, including the full range of 0.9 in both short arc and spray arc transfer, up to 1.0 solid wires, and up to 1.2 cored wires. Plus, ESAB Rebel EMP 235ic can also weld Stick rods up to 4mm and TIG rods up to 4.8mm.

Whether you have been welding for two years or 20, ESAB Rebel 235ic can make your job easier with sMIG (smartMIG). For the novice, there is basic mode, which makes setup simple. For the experienced, the exclusive, built-in arc control that constantly monitors your weld and adapts for superior, repeatable welds.

You’re on-site, out in the field, and in the shop. You need a machine that can go where you go and withstand the harsh environments you face. Rebel can. With a sturdy multi-handle roll cage, steel unibody construction, and IP23S-level protection, Rebel’s rugged exterior gives you the confidence to go where you need to go without fear.
The Rebel is a true Multi-Process inverter with professional-grade MIG performance, including flux-cored, Excellent MMA performance, including stainless steel, 6010 and 6011 cellulosic and 308L electrodes
• Exceptional lift TIG performance down to 5A

Designed to hold Tungsten electrodes and transfer current whilst using your TIG torch, these collets are ideal for use on WP17, WP18 and WP26 torches. Available in varying sizes to suit your required wire size, they are crucial in upholding the quality of your TIG welding torch.

Features and Benefits
• An economical way to keep your TIG torch operating to its full potential
• Manufactured to a high standard to ensure a steady current and provide a stable arc needed for precision welding
• Available in various sizes to ensure you find the correct fit for your torch

Typical Applications
• Ideal for use with WP17, WP18 and WP26 TIG welding torches to hold the Tungsten as you weld

The GYS 160P is a great value 10 to 160 amp DC ARC welding unit with inverter technology piloted by a microprocessor. The arc dynamic of the product is unique and revolutionary and can be used with all types of electrodes: Rutile, Basic, Stainless Steel and Cast Iron.

THE GYS 160P ARC Welder is a Portable but powerful machine due to its light weight of only 4.1kg, its highly transportable and its extremely economical with low power consumption. This ARC Welder has an Immediate Start thanks to its very high no-load voltage and supplies Constant Welding Power with very smooth melting due to the direct current and great penetration and perfect arc stability.

User Benefits:
• Hot Start giving increased power at the start.
• Anti Sticking to prevent electrode sticking.
• Arc Force instantaneous increase of the current in difficult welding situation.

The CIGWELD EasyWeld 160 welding machine offers many benefits of a professional welding machine in a compact, portable, easy to use and affordable self-contained single phase welding inverter. With QuickSet Plate Thickness Pre-Sets installed the guesswork is now taken out of the set-up, to allow excellent welding results.

Electronic QuickSet control for accurate adjustment of the welding parameters.
• Suitable for MIG with Shielding Gas and MIG Gasless Welding.
• STICK Welding capability to 140 Amps, with built Voltage Reduction Device (VRD) for extra safety.
• Welds most metals including Mild Steel, Stainless Steel, Aluminium and Bronze

CIGWELD have specially configured this machine to be able to produce great welding results from domestic household 240V x 10A power.
The EasyWeld 160 machine is ideal for people who want to do light fabrication, maintenance and repairs or DIY around the home, workshop, worksite, or farm, without compromising on quality or safety.

QuickSet your Plate thickness and weld away
Plate Thickness setting allows you to set up in a flash. There is no guessing the welding parameters. Use the QuickSet feature to set the machine to the correct plate thickness you are welding.

Awesome output for a small MIG
The EasyWeld 160 delivers a maximum output of 160Amps DC, which means the machine is capable of welding metals from 0.6mm up to 10mm.
In QuickSet mode the machine is limited to 6mm thickness. To reach higher thicknesses up to 10mm the machine can be manually adjusted to maximum Wire Feed Speed and Voltage which delivers exceptional welding results on larger metal joints.

VERSATILE
You can weld most metals including Mild Steel, Stainless Steel, Aluminium and Bronze.
As part of our product development we rigorously tested the Easyweld 160 with different metals locally!