Welding Equipment
ESAB Rebel EMP 235ic
When it comes to portable welders, the ESAB Rebel EMP 235ic is packed with the power to weld up to a half-inch on mild steel, measuring in at 235A at 20%. You have the ability to weld a wide range of metal thicknesses and applications, including the full range of 0.9 in both short arc and spray arc transfer, up to 1.0 solid wires, and up to 1.2 cored wires. Plus, ESAB Rebel EMP 235ic can also weld Stick rods up to 4mm and TIG rods up to 4.8mm.
Whether you have been welding for two years or 20, ESAB Rebel 235ic can make your job easier with sMIG (smartMIG). For the novice, there is basic mode, which makes setup simple. For the experienced, the exclusive, built-in arc control that constantly monitors your weld and adapts for superior, repeatable welds.
You’re on-site, out in the field, and in the shop. You need a machine that can go where you go and withstand the harsh environments you face. Rebel can. With a sturdy multi-handle roll cage, steel unibody construction, and IP23S-level protection, Rebel’s rugged exterior gives you the confidence to go where you need to go without fear.
The Rebel is a true Multi-Process inverter with professional-grade MIG performance, including flux-cored, Excellent MMA performance, including stainless steel, 6010 and 6011 cellulosic and 308L electrodes
• Exceptional lift TIG performance down to 5A
Whether you have been welding for two years or 20, ESAB Rebel 235ic can make your job easier with sMIG (smartMIG). For the novice, there is basic mode, which makes setup simple. For the experienced, the exclusive, built-in arc control that constantly monitors your weld and adapts for superior, repeatable welds.
You’re on-site, out in the field, and in the shop. You need a machine that can go where you go and withstand the harsh environments you face. Rebel can. With a sturdy multi-handle roll cage, steel unibody construction, and IP23S-level protection, Rebel’s rugged exterior gives you the confidence to go where you need to go without fear.
The Rebel is a true Multi-Process inverter with professional-grade MIG performance, including flux-cored, Excellent MMA performance, including stainless steel, 6010 and 6011 cellulosic and 308L electrodes
• Exceptional lift TIG performance down to 5A
Download
Products Lainnya
Designed to hold Tungsten electrodes and transfer current whilst using your TIG torch, these collets are ideal for use on WP17, WP18 and WP26 torches. Available in varying sizes to suit your required wire size, they are crucial in upholding the quality of your TIG welding torch.
Features and Benefits
• An economical way to keep your TIG torch operating to its full potential
• Manufactured to a high standard to ensure a steady current and provide a stable arc needed for precision welding
• Available in various sizes to ensure you find the correct fit for your torch
Typical Applications
• Ideal for use with WP17, WP18 and WP26 TIG welding torches to hold the Tungsten as you weld
Features and Benefits
• An economical way to keep your TIG torch operating to its full potential
• Manufactured to a high standard to ensure a steady current and provide a stable arc needed for precision welding
• Available in various sizes to ensure you find the correct fit for your torch
Typical Applications
• Ideal for use with WP17, WP18 and WP26 TIG welding torches to hold the Tungsten as you weld
When it comes to portable welders, the ESAB Rebel EMP 235ic is packed with the power to weld up to a half-inch on mild steel, measuring in at 235A at 20%. You have the ability to weld a wide range of metal thicknesses and applications, including the full range of 0.9 in both short arc and spray arc transfer, up to 1.0 solid wires, and up to 1.2 cored wires. Plus, ESAB Rebel EMP 235ic can also weld Stick rods up to 4mm and TIG rods up to 4.8mm.
Whether you have been welding for two years or 20, ESAB Rebel 235ic can make your job easier with sMIG (smartMIG). For the novice, there is basic mode, which makes setup simple. For the experienced, the exclusive, built-in arc control that constantly monitors your weld and adapts for superior, repeatable welds.
You’re on-site, out in the field, and in the shop. You need a machine that can go where you go and withstand the harsh environments you face. Rebel can. With a sturdy multi-handle roll cage, steel unibody construction, and IP23S-level protection, Rebel’s rugged exterior gives you the confidence to go where you need to go without fear.
The Rebel is a true Multi-Process inverter with professional-grade MIG performance, including flux-cored, Excellent MMA performance, including stainless steel, 6010 and 6011 cellulosic and 308L electrodes
• Exceptional lift TIG performance down to 5A
Whether you have been welding for two years or 20, ESAB Rebel 235ic can make your job easier with sMIG (smartMIG). For the novice, there is basic mode, which makes setup simple. For the experienced, the exclusive, built-in arc control that constantly monitors your weld and adapts for superior, repeatable welds.
You’re on-site, out in the field, and in the shop. You need a machine that can go where you go and withstand the harsh environments you face. Rebel can. With a sturdy multi-handle roll cage, steel unibody construction, and IP23S-level protection, Rebel’s rugged exterior gives you the confidence to go where you need to go without fear.
The Rebel is a true Multi-Process inverter with professional-grade MIG performance, including flux-cored, Excellent MMA performance, including stainless steel, 6010 and 6011 cellulosic and 308L electrodes
• Exceptional lift TIG performance down to 5A
The GYS 160P is a great value 10 to 160 amp DC ARC welding unit with inverter technology piloted by a microprocessor. The arc dynamic of the product is unique and revolutionary and can be used with all types of electrodes: Rutile, Basic, Stainless Steel and Cast Iron.
THE GYS 160P ARC Welder is a Portable but powerful machine due to its light weight of only 4.1kg, its highly transportable and its extremely economical with low power consumption. This ARC Welder has an Immediate Start thanks to its very high no-load voltage and supplies Constant Welding Power with very smooth melting due to the direct current and great penetration and perfect arc stability.
User Benefits:
• Hot Start giving increased power at the start.
• Anti Sticking to prevent electrode sticking.
• Arc Force instantaneous increase of the current in difficult welding situation.
THE GYS 160P ARC Welder is a Portable but powerful machine due to its light weight of only 4.1kg, its highly transportable and its extremely economical with low power consumption. This ARC Welder has an Immediate Start thanks to its very high no-load voltage and supplies Constant Welding Power with very smooth melting due to the direct current and great penetration and perfect arc stability.
User Benefits:
• Hot Start giving increased power at the start.
• Anti Sticking to prevent electrode sticking.
• Arc Force instantaneous increase of the current in difficult welding situation.
The CIGWELD TRANSMIG 175i+ is a self-contained single phase multiprocess welding inverter that is capable of performing GMAW/FCAW (MIG), MMAW (Stick) and GTAW (Lift TIG) welding processes.
The unit is equipped with an integrated wire feed unit, voltage reduction device (VRD applicable in Stick mode only), digital voltage and amperage meters, and a host of other features in order to fully satisfy the broad operating needs of the modern welding professional.
• 185A (MIG Mode) 3-in-1 MIG / Stick / Lift TIG Inverter Welder
• Digital Amperage and Voltage Meters
• Highly portable with carrying handle, carry strap and under 15kg
• Full multi-process capabilities; MIG, Stick and Lift TIG
• Integrated Wire Feed Unit Spools up to 5kg or 200mm
• Standards compliant VRD
• Fully compliant to AS 60974.1-2006. Enclosure Rated to IP23S – Designed for Indoor & Outdoor use.
• Arc Control (Inductance) for adjusting the intensity of the arc
• Adjustable Burnback Control for controlling MIG wire stick out
• Euro MIG Torch Connection
• Accepts Mechafin style 2R feed rolls
• Robust 50mmå_ Dinse twist lock connections
• 3 Year Limited Warranty
The unit is equipped with an integrated wire feed unit, voltage reduction device (VRD applicable in Stick mode only), digital voltage and amperage meters, and a host of other features in order to fully satisfy the broad operating needs of the modern welding professional.
• 185A (MIG Mode) 3-in-1 MIG / Stick / Lift TIG Inverter Welder
• Digital Amperage and Voltage Meters
• Highly portable with carrying handle, carry strap and under 15kg
• Full multi-process capabilities; MIG, Stick and Lift TIG
• Integrated Wire Feed Unit Spools up to 5kg or 200mm
• Standards compliant VRD
• Fully compliant to AS 60974.1-2006. Enclosure Rated to IP23S – Designed for Indoor & Outdoor use.
• Arc Control (Inductance) for adjusting the intensity of the arc
• Adjustable Burnback Control for controlling MIG wire stick out
• Euro MIG Torch Connection
• Accepts Mechafin style 2R feed rolls
• Robust 50mmå_ Dinse twist lock connections
• 3 Year Limited Warranty