CRC Brakleen® Pro Series Brake Parts Cleaner - Non-Chlorinated Low VOC, 19 Wt Oz 05084PS

Maintaining clean brake and disc parts can improve the life of your car's braking system and keep you safe on the roads. Using a brake parts cleaner for cleaning and degreasing is a great way to maximize the performance and increase the longevity of your entire brake system. CRC Brākleen® offers a powerful low VOC spray cleaner that works like no other. The Brākleen® Pro-Series line is designed for superior performance where it’s needed most: IN THE SHOP!

Applications
All brake parts: ABS, disc, drum, brake cylinders, brake drums, brake linings, brake shoes, calipers, clutch discs, disc brake pads, discs. Safe for use on all brake systems including Springs & Wedge brakes.

Most Powerful Low VOC Formula
Volatile Organic Compounds (VOC) are limited in some states, meaning products that contain them must meet strict requirements to be sold. Our Brākleen® low VOC formula offers the best cleaning performance in a non-chlorinated formula for states requiring a limit of 45% VOC or less. Like all non-chlorinated brake cleaners, it is flammable and should be used with caution. Use in a ventilated area and don’t forget to wear your gloves and safety glasses.

PowerJet® Spray Nozzle
Brākleen® Pro-Series Brake Parts Cleaner Non-Chlorinated Low VOC uses the PowerJet® spray nozzle that sprays with force, blasting away contaminants from your brake system. This powerful spray is designed to dislodge oils, grease, dirt, and other contaminants with little effort. The high-quality cleaning solution and stronger spray force combine to deliver a brake cleaning experience that customers prefer.

Effective Brake Cleaning
Brake systems parts are among the auto parts that require the most frequent cleaning. Grease, brake dust, fluid, and oils accumulate over time and can cause premature wear and lower brake performance. Brākleen® cleans and dries fast to remove contaminants from your parts and leaves no residue. The powerful formula restores brake performance and eliminates squeaks and squeals. It uses a carbon dioxide propellant and will not corrode components. It is designed for the ABS, brake disc, brake drum and cylinders, linings, calipers, brake shoes, clutch discs, brake pads, and more.

Fewer Cans, Less Waste
Brākleen® Pro-Series Cleaner comes in a 20-ounce shop size can, containing 50% more product than the standard size. The large can combined with the efficiency from the powerful spray and high-performance formula means going through fewer cans and creating less waste, reducing your carbon footprint.Get rid of dirt, oils, grease, and other contaminants using CRC Brākleen® Brake Parts Cleaner Non-Chlorinated Low VOC formula. CRC is the #1 brand of brake cleaner worldwide, with years of experience providing safe, reliable products.

Download

Products Lainnya

Kennedy Sledge Hammer, 14lb, Fibreglass Shaft, Anti-vibration

Designed to dampen the impact transmitted to the users hand and wrist, these fibreglass shaft, double faced sledge hammers are fully forged and heat-treated. Ideal for use on spikes, stakes, cold chisels and hardened nails and available to purchase in an array of sizes.

Features and Benefits
• Double faced for twice the product life
• Fully forged head that has been heat treated for maximum durability
• Fibreglass shaft minimises vibration and bounce-back

Typical Applications
• Construction
• DIY

Standards
• Meets the requirements of BS 876: 1981

Kennedy 7 Piece Insulated VDE Screwdriver Set in 1/3 Width Foam Inlay for Tool Cabinets

Volt-tested to ensure safety on or near electrical equipment up to 1000V AC or 1500V DC.
Insulated blades with magnetic tips. Conform with DIN 7438 and DIN EN 60900.

Features and Benefits
• The red underlay gives instant recognition of a missing tool and the top layer of foam is durable for industrial use.
• Finger cut-outs make tool retrieval very easy. This is extremely efficient as it eliminates the struggle of digging out the tools multiple times.
• Rapid tool location for instant use.
• Protection of expensive kit.
• Prevention of tools sliding around during transit.
• Avoids loss or theft of tools.
• Easy to see if tools are not replaced.
• Safety and peace of mind as tools will not be left within aircraft/vehicles/machinery

Kennedy Professional, 300mm, Box-beam Level, 3 Vials, Horizontal/Vertical/45°, Non-Magnetic

With an extruded aluminium body with a powder-coated finish, this range of box spirit levels is suited for professional use. Possessing 3 high visibility vials, 1 horizontal and 2 vertical, each product has an accuracy of 0.5mm/m. Featuring shock-absorbing end caps and milled working faces on top and bottom for precise measurement, a rule scale for ease of marking out and larger sizes possess hand grips. Available in varying sizes to suit your requirements.

Features and Benefits
• 3 vials at 45° horizontal and vertical
• Shock absorbing end caps protect the product if accidentally dropped
• Hand grips make the product easy to carry and transport wherever necessary (except KEN5103300K)
• Rule scale allows for easy marking out and measuring
• Aluminium body is durable and powder coating bolsters protection against wear and tear
• Available in a variety of sizes to suit your desires
• Milled working faces on the top and bottom of the products for accuracy and precise measuring

Typical Applications
• Construction
• DIY
• Plumbing
• Electrical

Kennedy Hex Key, L-Handle, Hex Ball, Imperial, 5/32"

Inch
Can be used at angles of up to 25° from the screw head, making them ideal for awkward access areas. Manufactured from hardened carbon steel, available with fluted driver handles, L-wrench pattern or T-handle.

CRC Brakleen® Pro Series Brake Parts Cleaner - Non-Chlorinated Low VOC, 19 Wt Oz 05084PS

Informasi Pemesanan