Tools & Chemicals
Kennedy-Pro Screwdriver Slotted 1.4mm x 40mm
These Pro-Torq parallel tip screwdrivers deliver expert quality, with hardened and tempered chrome alloy steel blades, each driver is fitted with a unique dual grip handle with revolving top designed for added user comfort whilst allowing more torque to be applied. Slotted head screws are the most commonly used screw. To safely drive these screws, the tip of the screwdriver should be of the same width as the slot in the screw head, therefore the driver needs to be selected in the most convenient size for your desired fasteners.
Features and Benefits
• Chrome alloy steel blades are highly durable
• Dual material handle combines the robust and stable nature of polypropylene with soft and comfortable thermoplastic rubber
• Ratchet action allows the user o apply more torque with minimal effort
• Available in a range of sizes to suit your exact requirements
• Black oxide tip is protected against corrosion and is designed to not round off fasteners for longevity
Typical Applications
• Electrical
• DIY
• Construction
• Plumbing
• Engineering
Features and Benefits
• Chrome alloy steel blades are highly durable
• Dual material handle combines the robust and stable nature of polypropylene with soft and comfortable thermoplastic rubber
• Ratchet action allows the user o apply more torque with minimal effort
• Available in a range of sizes to suit your exact requirements
• Black oxide tip is protected against corrosion and is designed to not round off fasteners for longevity
Typical Applications
• Electrical
• DIY
• Construction
• Plumbing
• Engineering
Download
Products Lainnya
This high performance, industrial strength formula quickly dissolves grease, oil and sludge. It has no flash evaporates rapidly and leaves no residue. This product is non-corrosive and non-staining.
Applications
Air tools, mechanical brakes, clutches, chains, wire ropes, motors, dies, molds, parts, bearings, generators & compressors.
Applications
Air tools, mechanical brakes, clutches, chains, wire ropes, motors, dies, molds, parts, bearings, generators & compressors.
This spiral ratchet screwdriver possesses a polished chrome plated body wit a comfortable lacquered wood handle. Boasting a 3-way ratchet action and a quick release chuck, the product is supplied with chrome vanadium steel crosspoint and flared screwdriver bits.
Features and Benefits
• Polished chrome plated body improves resistance to wear and tear as well as providing an easy tool clean
• 3-way ratchet makes for easier application of torque with less user effort
• Quick release chuck allows you to speedily disengage from fasteners
• Lacquered wood handle improves user comfort and grip when using
• Chrome vanadium steel bits are highly durable
• Supplied with crosspoint and flared screwdriver bits for versatility of use and to get you started quickly
Typical Applications
• Construction
• Electrical
• DIY
Features and Benefits
• Polished chrome plated body improves resistance to wear and tear as well as providing an easy tool clean
• 3-way ratchet makes for easier application of torque with less user effort
• Quick release chuck allows you to speedily disengage from fasteners
• Lacquered wood handle improves user comfort and grip when using
• Chrome vanadium steel bits are highly durable
• Supplied with crosspoint and flared screwdriver bits for versatility of use and to get you started quickly
Typical Applications
• Construction
• Electrical
• DIY
Volt-tested' to ensure safety on or near electrical equipment up to 1000V AC or 1500V DC. Insulated blades with magnetic tips. Conform with DIN 7438 and DIN EN 60900.
Crosspoint
Crosspoint screws virtually eliminate the screwdriver slippage if the correct size is used. The No.2 driver is suitable for most applications.
Crosspoint
Crosspoint screws virtually eliminate the screwdriver slippage if the correct size is used. The No.2 driver is suitable for most applications.
With a head of 99.9% pure electrolytic copper and a resilient plastic handle, this mallet provides a firm, positive blow without the risk of damage to expensive components. Ideal for positive blows on highly finished or closely ground machined parts in the aircraft, automotive or shipping industries. Also used by tool and gauge makers. This mallet is not recommended for non-sparking applications
Features and Benefits
• Provides a strong blow without inflicting damages to the desired workpiece
• Plastic handle is highly robust and helps deliver firm blows
• Copper head is durable and resistant to wear and tear
• Faces can be replaced when necessary
Typical Applications
• Automotive
• Assembly
• Aircraft
Features and Benefits
• Provides a strong blow without inflicting damages to the desired workpiece
• Plastic handle is highly robust and helps deliver firm blows
• Copper head is durable and resistant to wear and tear
• Faces can be replaced when necessary
Typical Applications
• Automotive
• Assembly
• Aircraft