Tools & Chemicals
Kennedy Manual Aviation Snips, Cut Right, Blade Chrome Vanadium
For use on mild steel or other non ferrous materials, these aviation snips cut from tight curves to straight. Available in both a left and right handed design, the product is manufactured from drop forged chrome vanadium steel with ground blades (54 - 58HRc). The double fulcrum compound action amplifies the pressure applied for easier cutting of up to 1.2mm cold rolled steel sheet. Each product also has a spring loaded, self-opening action for fast, effortless feed and single-handed operation. Complete with safety features such as anti-slip guards and a thumb lock that ensures the jaws stay closed when not in use.
Features and Benefits
• Available as either a left or right handed design to suit your handedness
• Drop forged chrome vanadium steel, ground blades offer durability and hold a good cutting edge even with extensive use
• Double fulcrum compound action amplifies the pressure applied for easier cutting
• Spring loaded, self-opening action allows for fast, effortless feed and single-handed operation
• Anti-slip guards offer extra safety when cutting
• Thumb lock ensures the jaws stay closed when not in use to avoid accidental cutting or injury
• PVC grip handles bolster user comfort, control and grip when using
Typical Applications
• Construction
• Engineering
• DIY
Features and Benefits
• Available as either a left or right handed design to suit your handedness
• Drop forged chrome vanadium steel, ground blades offer durability and hold a good cutting edge even with extensive use
• Double fulcrum compound action amplifies the pressure applied for easier cutting
• Spring loaded, self-opening action allows for fast, effortless feed and single-handed operation
• Anti-slip guards offer extra safety when cutting
• Thumb lock ensures the jaws stay closed when not in use to avoid accidental cutting or injury
• PVC grip handles bolster user comfort, control and grip when using
Typical Applications
• Construction
• Engineering
• DIY
Download
Products Lainnya
These Bi-Hexagonal 1/2in. square drive sockets possess a 12 point - side drive design that gives a higher torque than normal sockets, allows the product to grip worn nuts and will not round off existing nuts. All sockets have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories and the unique design requires only a one-twelfth turn to engage the next point of the socket. Available in a variety of imperial sizes, each piece is manufactured from chrome vanadium steel, is chrome plated and has a highly polished mirror finish.
Features and Benefits
• Available in a range of sizes to suit your requirements
• Manufactured from chrome vanadium steel which is highly durable
• Highly polished chrome plated finish protects the product against corrosion as well as repelling dirt and grime
• Bi-hexagonal side drive design allows the user to deliver more torque than a standard socket for easier turning
• Able to grip worn nuts as well as not rounding off existing nuts
• Ball retaining groove on each face of the square drive ensures a positive fit with accessories
Typical Applications
• Construction
• Plumbing
• Automotive
Features and Benefits
• Available in a range of sizes to suit your requirements
• Manufactured from chrome vanadium steel which is highly durable
• Highly polished chrome plated finish protects the product against corrosion as well as repelling dirt and grime
• Bi-hexagonal side drive design allows the user to deliver more torque than a standard socket for easier turning
• Able to grip worn nuts as well as not rounding off existing nuts
• Ball retaining groove on each face of the square drive ensures a positive fit with accessories
Typical Applications
• Construction
• Plumbing
• Automotive
Used for gripping round and irregular-shaped items, tubes and piping, this chain wrench is ideal for changing oil filters, hot radiator caps and hub caps. Manufactured from hardened chrome vanadium steel for heavy duty use and an assured positive grip, the product has an adjustable capacity of 60 to 140mm.
Features and Benefits
• Can grip both round and irregular shaped items
• Product is manufactured from chrome vanadium steel for durability and resilience
• Suited for effectively grip oil filters, hot radiator caps and hub caps to avoid user injury
• With an adjustable 60 to 140mm capacity to suit your specific needs
Typical Applications
• Automotive
• Engineering
• Plumbing
Features and Benefits
• Can grip both round and irregular shaped items
• Product is manufactured from chrome vanadium steel for durability and resilience
• Suited for effectively grip oil filters, hot radiator caps and hub caps to avoid user injury
• With an adjustable 60 to 140mm capacity to suit your specific needs
Typical Applications
• Automotive
• Engineering
• Plumbing
• Menghemat waktu, mudah digunakan
• Sistem penggunaan yang dipatenkan
• Beragam ukuran untuk pekerjaan apa saja, besar atau kecil
• Melindungi dari korosi
• Menembus ikatan karat
• Melarutkan perekat dan menyingkirkan kandungan air untuk menghilangkan kelembaban pada sistem kelistrikan dan permukaan logam
• Sistem penggunaan yang dipatenkan
• Beragam ukuran untuk pekerjaan apa saja, besar atau kecil
• Melindungi dari korosi
• Menembus ikatan karat
• Melarutkan perekat dan menyingkirkan kandungan air untuk menghilangkan kelembaban pada sistem kelistrikan dan permukaan logam
Featuring Ken-Grip® patented design sockets that grip fasteners that up to 95% rounded off and will not damage worn or rusted fasteners. Manufactured from Chrome Vanadium steel, they will fit a range of non-metric hexagons and E-Torx drive sizes. The screwdriver bits are manufactured from Chrome Molybdenum. Supplied in a robust case.
Features and Benefits
• Ken-Grip® sockets will not round off existing nuts
• 60 piece set is extremely comprehensive to ensure you have the correct component and tool to hand no matter the application
• Screwdriver bits are manufactured from chrome molybdenum steel, whilst the sockets are manufactured from chrome vanadium steel for optimum durability
• Supplied in a robust plastic case for ease of transportation, organisation and storage of your components
Contents
• Metric sockets: 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 10mm, 11mm, 12mm, 13mm. 14mm
• Crosspoint: No 1, No 2, No 3
• Pozidriv: No 1, No 2, No 3
• Torx: T5, T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T40
• Slotted: 3.5, 4.5, 5.5, 6.5, 8
• Hexagon: 1.5, 2, 2.5, 3, 4, 5, 6, 7, 8
• Tri-Wing: No 3, No 4, No 5
• Torq Set: TS.5, TS.6, TS.8, TS.10
• SIT: No 10, No 20, No 25, No 30, No 40
• Accessories: 1/4in. Square drive, 1/4in. hex magnetic bit holder, Y adaptor for cup hook, Spinner handle
Typical Applications
• Construction
• Engineering
• Automotive
Features and Benefits
• Ken-Grip® sockets will not round off existing nuts
• 60 piece set is extremely comprehensive to ensure you have the correct component and tool to hand no matter the application
• Screwdriver bits are manufactured from chrome molybdenum steel, whilst the sockets are manufactured from chrome vanadium steel for optimum durability
• Supplied in a robust plastic case for ease of transportation, organisation and storage of your components
Contents
• Metric sockets: 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 10mm, 11mm, 12mm, 13mm. 14mm
• Crosspoint: No 1, No 2, No 3
• Pozidriv: No 1, No 2, No 3
• Torx: T5, T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T40
• Slotted: 3.5, 4.5, 5.5, 6.5, 8
• Hexagon: 1.5, 2, 2.5, 3, 4, 5, 6, 7, 8
• Tri-Wing: No 3, No 4, No 5
• Torq Set: TS.5, TS.6, TS.8, TS.10
• SIT: No 10, No 20, No 25, No 30, No 40
• Accessories: 1/4in. Square drive, 1/4in. hex magnetic bit holder, Y adaptor for cup hook, Spinner handle
Typical Applications
• Construction
• Engineering
• Automotive