Tools & Chemicals
Kennedy Adjustable Spanner, Steel, 10in./250mm Length, 33mm Jaw Capacity
Constructed from high strength 'I' beam section vanadium steel, this range of adjustable wrenches from Kennedy® are manufactured with quality at the forefront. With heat treated jaws, a phosphated finish and slimline tapered jaws, each product guarantees an excellent performance even over time. Parallel jaws offer smooth adjustment whilst possessing a self-locking design. Completed with a 15° offset head angle.
Features and Benefits
• 15° offset head angle for positive torque control and accessibility even in awkward places
• Phosphated finish bolsters resistance to corrosion and general wear and tear
• Manufactured from high strength 'I' beam section vanadium steel to ensure product longevity
• Heat treated jaws guarantee grip and extended performance even with regular use
• Self-locking design stops the jaws opening accidentally even when under full load
Typical Applications
• Suitable for industrial engineering, automotive, agricultural, maintenance and assembly applications
Standards
• Conforms to BS 6333-1995 and DIN3117-1988
Features and Benefits
• 15° offset head angle for positive torque control and accessibility even in awkward places
• Phosphated finish bolsters resistance to corrosion and general wear and tear
• Manufactured from high strength 'I' beam section vanadium steel to ensure product longevity
• Heat treated jaws guarantee grip and extended performance even with regular use
• Self-locking design stops the jaws opening accidentally even when under full load
Typical Applications
• Suitable for industrial engineering, automotive, agricultural, maintenance and assembly applications
Standards
• Conforms to BS 6333-1995 and DIN3117-1988
Download
Products Lainnya
These aviation snips have the ability to cuts straight, left or right. Possessing a self-opening action for fast, effortless feed, with a built-in convenient, protective safety latch. Manufactured from drop forged chrome vanadium ground steel with a hardness of 54 - 58HRc. The double fulcrum compound action amplifies the pressure applied for easier cutting of up to 1.2mm cold rolled steel sheet. Completed by anti-slip guards, thumb lock and a spring loaded self-opening action for one handed operation.
Features and Benefits
• Anti slip guards for extra protection from slippage
• Thumb lock to secure the jaws when not in use
• Drop forged chrome vanadium steel blades to hold a good cutting edge even over time
• Spring loaded, self opening action to allow for effortless feed and single handed operation
• Double fulcrum allows for easier cutting of even 1.2mm steel
Typical Applications
• For use on mild steels and other non-ferrous materials
Features and Benefits
• Anti slip guards for extra protection from slippage
• Thumb lock to secure the jaws when not in use
• Drop forged chrome vanadium steel blades to hold a good cutting edge even over time
• Spring loaded, self opening action to allow for effortless feed and single handed operation
• Double fulcrum allows for easier cutting of even 1.2mm steel
Typical Applications
• For use on mild steels and other non-ferrous materials
Kennedy® mechanics torque wrench is chrome plated with a polished steel head and retractable torque setting lever. "Click & Snap" action indicates when the pre-set torque level has been reached. Push through square drive connector instantly reverses the action for quick and simple operation.
Features and Benefits
• Available in a variety of sizes to suit your requirements
• Repeatable accuracy of +/- 4% for precise turning
• Manufactured from steel and chrome plated for durability and resistance to corrosion
• Easily reversed via the push through connector
• 4 easy read scales (Nm, kgf.m, lbf.in x 10, lbf.ft.) for versatility of measuring
• Supplied with factory tested calibration certificate
Typical Applications
• Construction
• Engineering
• Automotive
Standards
• ISO 6789-2:2017 & ASME B107.14M-2004
• ASME B107.14M-2004
• DIN ISO6789
Features and Benefits
• Available in a variety of sizes to suit your requirements
• Repeatable accuracy of +/- 4% for precise turning
• Manufactured from steel and chrome plated for durability and resistance to corrosion
• Easily reversed via the push through connector
• 4 easy read scales (Nm, kgf.m, lbf.in x 10, lbf.ft.) for versatility of measuring
• Supplied with factory tested calibration certificate
Typical Applications
• Construction
• Engineering
• Automotive
Standards
• ISO 6789-2:2017 & ASME B107.14M-2004
• ASME B107.14M-2004
• DIN ISO6789
This range of straight jaw, external circlip pliers is suited for heavy duty, regular and industrial use. Constructed from resilient chrome vanadium steel, fully hardened and tempered, each product also boasts PVC cushion grip handles. Completed by a coil sprung to aid operation. Available in three sizes.
Features and Benefits
• Manufactured from industrial quality chrome vanadium steel that has been fully hardened and tempered for durability
• PVC cushion grip handles boost user comfort and control whilst using
• Coil spring action makes operating the tool easier and lessens hand fatigue
• Available in three sizes to suit your needs
Typical Applications
• Construction
• DIY
• Automotive
• Engineering
Features and Benefits
• Manufactured from industrial quality chrome vanadium steel that has been fully hardened and tempered for durability
• PVC cushion grip handles boost user comfort and control whilst using
• Coil spring action makes operating the tool easier and lessens hand fatigue
• Available in three sizes to suit your needs
Typical Applications
• Construction
• DIY
• Automotive
• Engineering
Boasting tapered jaws with a smooth jaw adjustment, this range of adjustable spanners is ideal for versatile and regular use. Manufactured from drop forged chrome vanadium steel with a chrome finish, each adjustable spanner also features a graduated laser etched jaw for fast jaw setting. Available in varying lengths to suit your preferences.
Features and Benefits
• Tapered jaws allow for access in confined and restricted spaces
• Available in varying sizes to allow you to select the size best suited for your needs
• Laser etched scale on the jaw for fast and accurate setting
• Manufactured from drop forged steel for ultimate durability and strength
• Chrome polished finish repels dirt and makes cleaning easier
Typical Applications
• DIY
• Construction
• Plumbing
• Engineering
Notes
• Also available in a 2 piece (6"/150mm & 10"/250mm) set, please see SEN5014750K
Features and Benefits
• Tapered jaws allow for access in confined and restricted spaces
• Available in varying sizes to allow you to select the size best suited for your needs
• Laser etched scale on the jaw for fast and accurate setting
• Manufactured from drop forged steel for ultimate durability and strength
• Chrome polished finish repels dirt and makes cleaning easier
Typical Applications
• DIY
• Construction
• Plumbing
• Engineering
Notes
• Also available in a 2 piece (6"/150mm & 10"/250mm) set, please see SEN5014750K