Tools & Chemicals
Kennedy-Pro 200mm, Non-Sparking Needle Nose Pliers
Long Nose Pliers
With side cutter, serrated jaws and safety grips.
Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 - 85kgf/mm2.
Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark-resistant properties, is essential.
With side cutter, serrated jaws and safety grips.
Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 - 85kgf/mm2.
Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark-resistant properties, is essential.
Download
Products Lainnya
Designed to dampen the impact transmitted to the users hand and wrist, these fibreglass shaft, double faced sledge hammers are fully forged and heat-treated. Ideal for use on spikes, stakes, cold chisels and hardened nails and available to purchase in an array of sizes.
Features and Benefits
• Double faced for twice the product life
• Fully forged head that has been heat treated for maximum durability
• Fibreglass shaft minimises vibration and bounce-back
Typical Applications
• Construction
• DIY
Standards
• Meets the requirements of BS 876: 1981
Features and Benefits
• Double faced for twice the product life
• Fully forged head that has been heat treated for maximum durability
• Fibreglass shaft minimises vibration and bounce-back
Typical Applications
• Construction
• DIY
Standards
• Meets the requirements of BS 876: 1981
Supplied in metric sizes, this range of double-ended spanners is highly versatile. Constructed from chrome vanadium steel* with a satin finish body and highly polished heads, the product is completed by a 15° offset angled head. Available in multiple sizes to allow you to select the product best suited to your application.
Features and Benefits
• Manufactured from chrome vanadium steel* which is highly robust and durable
• Double-ended design gives double the tool life and use
• Highly polished heads repel dirt and grime and make for easier cleaning
• 15° offset angled head allows for access in restricted areas and makes turning easier
• Available in an array of sizes to suit your specific application
Typical Applications
• Plumbing
• DIY
• Automotive
• Engineering
Standards
• ASME B107: Sizes 36 x 41mm to 46mm x 50mm
• DIN 3310: Sizes 4 x 5mm to 32 x 36mm
Notes
• *36 x 41, 41 x 46, 46 x 50mm are made from drop forged carbon steel
Features and Benefits
• Manufactured from chrome vanadium steel* which is highly robust and durable
• Double-ended design gives double the tool life and use
• Highly polished heads repel dirt and grime and make for easier cleaning
• 15° offset angled head allows for access in restricted areas and makes turning easier
• Available in an array of sizes to suit your specific application
Typical Applications
• Plumbing
• DIY
• Automotive
• Engineering
Standards
• ASME B107: Sizes 36 x 41mm to 46mm x 50mm
• DIN 3310: Sizes 4 x 5mm to 32 x 36mm
Notes
• *36 x 41, 41 x 46, 46 x 50mm are made from drop forged carbon steel
Made of Chrome Vanadium Steel with a satin finish, this set consists of 3 wrenches along with 3 interchangeable hinged hook and pin arms plus 2 spare pins. For use on slotted rings. Supplied in a strong carry case.
Features and Benefits
• Manufactured from chrome vanadium steel making for a highly robust product
• Satin finish protects the product against corrosion
• Supplied in a strong carry case for ease organising, storing and protecting your tools
• 8 piece set ensures you have the right product to hand when working on slotted rings
Contents
• 3 x wrenches
• 3 x interchangeable hinged hook and pin arms
• 2 x spare pins
Typical Applications
• Automotive
• Engineering
Features and Benefits
• Manufactured from chrome vanadium steel making for a highly robust product
• Satin finish protects the product against corrosion
• Supplied in a strong carry case for ease organising, storing and protecting your tools
• 8 piece set ensures you have the right product to hand when working on slotted rings
Contents
• 3 x wrenches
• 3 x interchangeable hinged hook and pin arms
• 2 x spare pins
Typical Applications
• Automotive
• Engineering
Suited primarily for use on metals, these machinists hammers are an invaluable tool. Manufactured to European DIN 1041 standard, each hammer possesses a drop forged steel head and a hickory shaft. Available in a variety of sizes.
Features and Benefits
• Drop forged steel head delivers firm and effective blows
• Hickory shaft is resilient and dampens the effect of vibrations travelling to the hand and wrist
• Available in a host of varying sizes to suit your needs
• Shaft is waxed to further protect against damage and to bolster user comfort
Typical Applications
• Construction
• Engineering
• DIY
Standards
• DIN 1041
Features and Benefits
• Drop forged steel head delivers firm and effective blows
• Hickory shaft is resilient and dampens the effect of vibrations travelling to the hand and wrist
• Available in a host of varying sizes to suit your needs
• Shaft is waxed to further protect against damage and to bolster user comfort
Typical Applications
• Construction
• Engineering
• DIY
Standards
• DIN 1041