Tools & Chemicals
Kengrip 1/4in. Drive, KenGrip Socket, 10mm, Metric, 6 Point
The Ken-Grip® 1.4in square drive sockets offer a new standard of performance with the ability to grip up to 95% of a rounded fastener. It has a unique patented design that grips even worn and rusted fasteners without damaging them and can be used on a wide range of fasteners, including non-metric hexagons and E-Torx Drive sizes. Double knurl feature gives a high grip which is essential for quick tool change when hands are greasy or oily. Manufactured from chrome vanadium steel, the sockets and accessories are aluminium free and fully chrome plated for an easy clean finish.
Features and Benefits
• Grips fasteners which are up to 95% rounded off for versatility of use
• Will not damage even worn or rusted fasteners for safe use every time
• Also fits a wide range of non-metric Hexagons and E-Torx® Drive Sizes allowing you to use the product in a wider scope
• Fully chrome plated finish for easy clean
• Unique 'Double-Knurl' design for high grip even when fingers are oily or greasy
• Aluminium-free finish for non-sparking action
• Available in a variety of metric sizes to suit your needs
Typical Applications
• DIY
• Engineering
• Plumbing
• Construction
Standards
• Conform to DIN3124
Features and Benefits
• Grips fasteners which are up to 95% rounded off for versatility of use
• Will not damage even worn or rusted fasteners for safe use every time
• Also fits a wide range of non-metric Hexagons and E-Torx® Drive Sizes allowing you to use the product in a wider scope
• Fully chrome plated finish for easy clean
• Unique 'Double-Knurl' design for high grip even when fingers are oily or greasy
• Aluminium-free finish for non-sparking action
• Available in a variety of metric sizes to suit your needs
Typical Applications
• DIY
• Engineering
• Plumbing
• Construction
Standards
• Conform to DIN3124
Download
Products Lainnya
These traditional designed rolling head pry bars are ideal for use by tradesmen in any industrial environment. Suitable for use in confined spaces and manufactured from forged carbon heat-treated steel with ground points, the product is available in three varying sizes to suit any applications.
Features and Benefits
• Ground points hold a precise edge even with extended use
• Manufactured from carbon steel for durability
• Available in three varying sizes to suit your needs
• Slimline design allows the product to be used even in confined spaces
Typical Applications
• Opening crates
• Aligning holes
• Pulling seals
• Engineering
Features and Benefits
• Ground points hold a precise edge even with extended use
• Manufactured from carbon steel for durability
• Available in three varying sizes to suit your needs
• Slimline design allows the product to be used even in confined spaces
Typical Applications
• Opening crates
• Aligning holes
• Pulling seals
• Engineering
Suited for the insertion and removal of fasteners and fixings using 1/2" square drive tooling, this range of 1/2" drive screwdriver socket bits are ideal for a host of applications. Made from chrome vanadium steel, fully chrome plated with a mirror finish, and aluminium-free, each product has an emphasis on longevity and high standards. All have ball retaining grooves on each face of the square drive and are available with various socket sizes and bit types.
Features and Benefits
• Available to purchase with varying socket sizes and bit types to ensure you find the right product to suit your needs
• Manufactured from chrome vanadium steel making for a robust product
• Each product is chrome plated to bolster resistance to corrosion, wear and tear, and general punishment
• Ball retaining groove on each face of the square drive
Typical Applications
• Ideal for use when inserting and removing fasteners and fixings in the following industries:
• Construction
• Automotive
• Engineering
• DIY
• Plumbing
• Electrical
Standards
• Conforms to DIN standards
Features and Benefits
• Available to purchase with varying socket sizes and bit types to ensure you find the right product to suit your needs
• Manufactured from chrome vanadium steel making for a robust product
• Each product is chrome plated to bolster resistance to corrosion, wear and tear, and general punishment
• Ball retaining groove on each face of the square drive
Typical Applications
• Ideal for use when inserting and removing fasteners and fixings in the following industries:
• Construction
• Automotive
• Engineering
• DIY
• Plumbing
• Electrical
Standards
• Conforms to DIN standards
Chrome vanadium steel with a satin finish body and highly polished heads, with a 15° offset.
DIN 3110.
Contents
6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23, 24 x 27 and 30 x 32mm.
DIN 3110.
Contents
6 x 7, 8 x 9, 10 x 11, 12 x 13, 14 x 15, 16 x 17, 18 x 19, 20 x 22, 21 x 23, 24 x 27 and 30 x 32mm.
This kit of screwdrivers and pliers have fully insulated, high, grip dual material handles that are VDE tested up to 1000V. The screwdrivers have magnetic tips, chrome vanadium steel blades and a hanging hole. The pliers have chrome vanadium steel double polished head and joint heads.
Features and Benefits
• High grip dual material handles
• Magnetic tips screwdrivers with chrome vanadium steel blades and a hanging hole
• Chrome vanadium steel pliers with double polished heads
• All tools are VDE approved
Typical Applications
• Inserting various sizes of fasteners
• Gripping, twisting and cutting wire
Contents
• Screwdrivers:
• Crosspoint: No.0 x 60mm, No.1 x 80mm, No.2 x 100mm
• Parallel: 2.5 x 75mm, 4.0 x 100mm, 5.5 x 125mm, 6.5 x 150mm
• Pliers:
• 6.3/8" Pro-Torq snipe nose pliers
• 6.1/4" Pro-Torq grip nipper pliers
• 6.1/2" Pro-Torq engineering combination pliers
Features and Benefits
• High grip dual material handles
• Magnetic tips screwdrivers with chrome vanadium steel blades and a hanging hole
• Chrome vanadium steel pliers with double polished heads
• All tools are VDE approved
Typical Applications
• Inserting various sizes of fasteners
• Gripping, twisting and cutting wire
Contents
• Screwdrivers:
• Crosspoint: No.0 x 60mm, No.1 x 80mm, No.2 x 100mm
• Parallel: 2.5 x 75mm, 4.0 x 100mm, 5.5 x 125mm, 6.5 x 150mm
• Pliers:
• 6.3/8" Pro-Torq snipe nose pliers
• 6.1/4" Pro-Torq grip nipper pliers
• 6.1/2" Pro-Torq engineering combination pliers