Tools & Chemicals
Kennedy-Pro 10 Piece Insualted Screwdriver and Plier set
This kit of screwdrivers and pliers have fully insulated, high, grip dual material handles that are VDE tested up to 1000V. The screwdrivers have magnetic tips, chrome vanadium steel blades and a hanging hole. The pliers have chrome vanadium steel double polished head and joint heads.
Features and Benefits
• High grip dual material handles
• Magnetic tips screwdrivers with chrome vanadium steel blades and a hanging hole
• Chrome vanadium steel pliers with double polished heads
• All tools are VDE approved
Typical Applications
• Inserting various sizes of fasteners
• Gripping, twisting and cutting wire
Contents
• Screwdrivers:
• Crosspoint: No.0 x 60mm, No.1 x 80mm, No.2 x 100mm
• Parallel: 2.5 x 75mm, 4.0 x 100mm, 5.5 x 125mm, 6.5 x 150mm
• Pliers:
• 6.3/8" Pro-Torq snipe nose pliers
• 6.1/4" Pro-Torq grip nipper pliers
• 6.1/2" Pro-Torq engineering combination pliers
Features and Benefits
• High grip dual material handles
• Magnetic tips screwdrivers with chrome vanadium steel blades and a hanging hole
• Chrome vanadium steel pliers with double polished heads
• All tools are VDE approved
Typical Applications
• Inserting various sizes of fasteners
• Gripping, twisting and cutting wire
Contents
• Screwdrivers:
• Crosspoint: No.0 x 60mm, No.1 x 80mm, No.2 x 100mm
• Parallel: 2.5 x 75mm, 4.0 x 100mm, 5.5 x 125mm, 6.5 x 150mm
• Pliers:
• 6.3/8" Pro-Torq snipe nose pliers
• 6.1/4" Pro-Torq grip nipper pliers
• 6.1/2" Pro-Torq engineering combination pliers
Download
Products Lainnya
Manufactured from forged and hardened steel, these ring slogging spanners also possess machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners, the product is available in a variety of metric sizes to ensure you find the correct size for your needs.
Features and Benefits
• Forged steel construction makes for a durable product
• Flat striking faces enable the product to be struck with a hammer if needed
• Corrosion-resistant finish bolsters product longevity
• Available in an array of sizes to suit varying specifications
Typical Applications
• Automotive
• Construction
• Plumbing
Standards
• Conforms to DIN 7444
Features and Benefits
• Forged steel construction makes for a durable product
• Flat striking faces enable the product to be struck with a hammer if needed
• Corrosion-resistant finish bolsters product longevity
• Available in an array of sizes to suit varying specifications
Typical Applications
• Automotive
• Construction
• Plumbing
Standards
• Conforms to DIN 7444
Manufactured from fully hardened carbon steel, these quality long arm, ductile key L-wrenches/Allen keys are precision-made with accurate AF dimensions for quality you can rely on.
Features and Benefits
• Precision square cut ends for full socket contact
• Fully hardened carbon steel for durability
• Comfortable grip for improved torque
Typical Applications
• Installation and removal of fasteners
Standards
• DIN ISO 2936
Features and Benefits
• Precision square cut ends for full socket contact
• Fully hardened carbon steel for durability
• Comfortable grip for improved torque
Typical Applications
• Installation and removal of fasteners
Standards
• DIN ISO 2936
Featuring Ken-Grip® patented design sockets that grip fasteners that up to 95% rounded off and will not damage worn or rusted fasteners. Manufactured from Chrome Vanadium steel, they will fit a range of non-metric hexagons and E-Torx drive sizes. The screwdriver bits are manufactured from Chrome Molybdenum. Supplied in a robust case.
Features and Benefits
• Ken-Grip® sockets will not round off existing nuts
• 60 piece set is extremely comprehensive to ensure you have the correct component and tool to hand no matter the application
• Screwdriver bits are manufactured from chrome molybdenum steel, whilst the sockets are manufactured from chrome vanadium steel for optimum durability
• Supplied in a robust plastic case for ease of transportation, organisation and storage of your components
Contents
• Metric sockets: 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 10mm, 11mm, 12mm, 13mm. 14mm
• Crosspoint: No 1, No 2, No 3
• Pozidriv: No 1, No 2, No 3
• Torx: T5, T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T40
• Slotted: 3.5, 4.5, 5.5, 6.5, 8
• Hexagon: 1.5, 2, 2.5, 3, 4, 5, 6, 7, 8
• Tri-Wing: No 3, No 4, No 5
• Torq Set: TS.5, TS.6, TS.8, TS.10
• SIT: No 10, No 20, No 25, No 30, No 40
• Accessories: 1/4in. Square drive, 1/4in. hex magnetic bit holder, Y adaptor for cup hook, Spinner handle
Typical Applications
• Construction
• Engineering
• Automotive
Features and Benefits
• Ken-Grip® sockets will not round off existing nuts
• 60 piece set is extremely comprehensive to ensure you have the correct component and tool to hand no matter the application
• Screwdriver bits are manufactured from chrome molybdenum steel, whilst the sockets are manufactured from chrome vanadium steel for optimum durability
• Supplied in a robust plastic case for ease of transportation, organisation and storage of your components
Contents
• Metric sockets: 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 10mm, 11mm, 12mm, 13mm. 14mm
• Crosspoint: No 1, No 2, No 3
• Pozidriv: No 1, No 2, No 3
• Torx: T5, T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T40
• Slotted: 3.5, 4.5, 5.5, 6.5, 8
• Hexagon: 1.5, 2, 2.5, 3, 4, 5, 6, 7, 8
• Tri-Wing: No 3, No 4, No 5
• Torq Set: TS.5, TS.6, TS.8, TS.10
• SIT: No 10, No 20, No 25, No 30, No 40
• Accessories: 1/4in. Square drive, 1/4in. hex magnetic bit holder, Y adaptor for cup hook, Spinner handle
Typical Applications
• Construction
• Engineering
• Automotive
Kennedy® mechanics torque wrench is chrome plated with a polished steel head and retractable torque setting lever. "Click & Snap" action indicates when the pre-set torque level has been reached. Push through square drive connector instantly reverses the action for quick and simple operation.
Features and Benefits
• Available in a variety of sizes to suit your requirements
• Repeatable accuracy of +/- 4% for precise turning
• Manufactured from steel and chrome plated for durability and resistance to corrosion
• Easily reversed via the push through connector
• 4 easy read scales (Nm, kgf.m, lbf.in x 10, lbf.ft.) for versatility of measuring
• Supplied with factory tested calibration certificate
Typical Applications
• Construction
• Engineering
• Automotive
Standards
• ISO 6789-2:2017 & ASME B107.14M-2004
• ASME B107.14M-2004
• DIN ISO6789
Features and Benefits
• Available in a variety of sizes to suit your requirements
• Repeatable accuracy of +/- 4% for precise turning
• Manufactured from steel and chrome plated for durability and resistance to corrosion
• Easily reversed via the push through connector
• 4 easy read scales (Nm, kgf.m, lbf.in x 10, lbf.ft.) for versatility of measuring
• Supplied with factory tested calibration certificate
Typical Applications
• Construction
• Engineering
• Automotive
Standards
• ISO 6789-2:2017 & ASME B107.14M-2004
• ASME B107.14M-2004
• DIN ISO6789