The CP7755 Series 1/2" impact wrench allows operators to select the right power with 11 settings in forward on its innovative adjustable power control. The hose is no longer an issue thanks to the integrated pneumatic flex mini pneumatic inlet. The series delivers reverse torque up to 960 ft.lbs. Available in 4 models: 1/2" short anvil with pneumatic Flex mini, 1/2" long anvil with pneumatic Flex mini, 1/2" short anvil without pneumatic Flex mini and 1/2" long anvil without pneumatic Flex mini.

IWS100X - 1" square drive. Suitable for industrial and commercial production and assembly applications. Side handle for two-handed operation. Top mounted spring balance loop. Easy to use forward/reverse switch and three position power regulator. Top venting exhaust. Oiling points for daily maintenance.

Bolt Capacity: M33
Working torque: 2,030 Nm
Maximum torque: 2,300Nm
Safe working pressure: 6.2bar / 90psi.
Air inlet thread: 1/2" NPT.
Minimum air hose size (ID): 1/2" (13mm).
Air pressure: 6.3bar/90 psi.
Air consumption: 7.0 cfm.
Sound pressure level: 96 dBA.
Sound power level: 101.67 dBA.
Vibration level: 6.0 m/s².
Overall length: 448mm.

Elbow Connector to Male Parallel


Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.


Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.

Available in a variety of sizes and specifications, these collets are designed to suit Kobe® and similar die grinders.

Features and Benefits
• Cost-effective way of changing your die grinders' function
• Available in a variety of specifications and sizes to suit your needs

Typical Applications
• For use with Kobe® grinders