Test the safety and performance of a type 1, level 1 or level 2 electric vehicle ac charging stations (EVSEs) with the Fluke FEV100. This test adapter simulates the presence of an electrical vehicle, allowing you to conduct tests in combination with appropriate test instruments such as a digital multimeter or oscilloscope. Use the FEV100 to verify an EVSE is working properly after install and during periodic maintenance, or troubleshoot an EVSE if it is not delivering the appropriate charge.
Electrical safety
EVSE charging cables may become damaged over the course of use, increasing electric shock risks to users. Stay protected from and check risk of electric shock with the GFCI trip test. This function verifies the breaker of the EVSE is connected by detecting ground faults. Additionally, the PE grounding protection pre-test verifies that there is no presence of dangerous voltage at the ground terminal.
Simplicity and convenience
Perform a variety of tests including ground fault checks, insulation of wires, measuring voltage and duty cycle to see max current available for charging all in one adapter that safely integrates with the Fluke portfolio of test and measurement tools. There is no need to bring an electric vehicle onsite for EVSE troubleshooting: the adapter acts as an electric vehicle when connected to an EVSE for easy performance and maintenance testing.
Recommended tools for use with the FEV100

Key features
• Check protective earth for correct wiring and functioning with the PE pre-test feature.
• Perform GFCI troubleshooting of EVSE and verify operation within safety standards.
• Test charging states of EVSE with CP state simulation.
• Verify charging voltage and maximum available current using a multimeter.
• SAE J1772 compliant to North American standards.

The NEW standard for rugged



The Fluke 27 II and 28 II digital multimeters set a new standard for operation in harsh conditions with the features and accuracy to solve most electrical problems. Both gauges are IP 67 rated (water and dust repellent), MSHA approved, extended operating temperature range of -15°C to +55°C (5°F to 131°F, -40°C for s /s 20 minutes) and 95 % humidity, and has been designed and tested to withstand a 3 m (10 ft) drop. The Fluke 20 Series Multimeter is designed to work in the toughest environments.

Modern design with a knurled thumb wheel for easy use when taking internal and external depth and step measurements.

Dual readout giving instant inch/metric conversion at the touch of a button.

Zero reset at any point, large clear display, error-free operation, fast response speed. Non-output type.



Resolution: 0.01mm/0.0005".



Extra batteries available - Order Code EDI -904-4000K.

The 87V MAX contains all the trusted features of the most popular DMM in use today, the Fluke 87V, with many more extras.



Withstands drops of up to 4 meters (13 feet)

Fluke's most rugged digital multimeter. The 87V MAX features a rugged case for industrial use and a removable holster. This holster also doubles as a test probe holder for one-handed operation.



IP67 rated

Completely waterproof and dustproof, to work reliably anywhere you need to work.



Heat and cold resistant

This meter has a longer operating temperature range from -40 °C (for up to 20 minutes) to +55 °C.



Another product highlight

- True-rms ac current and voltage for accurate measurements on non-linear signals

- Measures up to 1000 V ac and dc

- Measures up to 10 A (20 A for 30 seconds)

- Frequency up to 200 kHz

- Built-in thermometer allows you to freely take temperature readings without having to carry a separate instrument

- Min/Max/Average recording, plus 250 µs Peak min-max to record variations automatically

- Unique function for accurate measurement of voltage and frequency in variable frequency motor drives and other electrically noisy equipment

- Large digit display, 2 brightness levels, white backlight, and backlit keypad keys for better visibility

- High resolution 19,999 digit mode display

- Long lasting battery life (800 hours)